• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.34-42
• /
• 2011

With the progress of USN technology, fields to which wireless sensor node is applicable are increased under a condition that it holds a lot of problems to solve for betterment. One of the problems which acts as an obstacle to USN industry diffusion is the wireless sensor node battery exchange to their individual life cycle. Exchanging the battery of so many sensor nodes one by one requires a great deal of times and costs. Such problem is against the convenience supply -aim by applying USN technology. In this paper, using RF wireless power transmission system that power transmission / harvesting module from a distance of 5 m and the power of 10 dBm with a current of 1 mA or more for Sensor Nodes in lithium-polymer battery charging system tested and verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.2
• /
• pp.69-72
• /
• 2005

ITO-Al-ITO multi-layers were deposited at room temperature by RF magnetron sputtering on polyethylene terephthalate (PET). The films were deposited at various pressures of $8\times10^{-4},\;1\times10^{-3},\;4\times10^{-3},\;8\times10^{-3}\;and\;1\times10^{-2}$ Torr. A correlation between microstructure and electro-optical properties was studied. Films deposited? at low pressure have higher transmission, and lower reflectance and resistance than film deposited at high pressure. Sheet resistance, transmission, and reflectance were $141.6\Omega/\Box\;88\%\;and\;6.8\%$ resectively when the deposition pressure was $8\times10^{-4}$ torr, that was the optimum condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1113-1120
• /
• 2003

It is expected in the future that the demand of optical subcarrier multiplexing system, in which a number of small size base stations with only antenna and RF transmission are connected to central station using optical fiber, will be increased in the CDMA digital cellular mobile communication network. In this paper, in order to analysis the performance of optical SCM system fur CDMA RF signal transmission, MZ modulator is modelled as a non-linear transfer function with cubic operation. The performance degradation due to multipath signals and other user signals through MB modulator is analyzed and the performance is improved using the Rake receiver.

• Electronics and Telecommunications Trends
• /
• v.26 no.4
• /
• pp.79-89
• /
• 2011

본 문서에서는 RF 에너지 전송기술의 동향을 살펴보고, 분석된 내용을 바탕으로 국가적인 차원에서 RF 에너지 전송기술을 어떠한 방향으로 이끌어 가야 하는지에 대해 기술하고자 한다. 국가가 반드시 수행해야 할 기반원천기술, 산업적 특성에 따른 신시장 혹은 신기술 구현을 위한 실용원천기술 개발분야를 살펴볼 것이다. 또한 기존 자기공명방식에 대한 한계를 분석하여 한계를 극복하기 위한 핵심원천기술을 서술하였다. 마지막으로 RF 에너지 전송산업이 국내에 잘 정착하기 위한 선도전파정책을 구현하기 위한 연구분야에 대하여 살펴보고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1445-1447
• /
• 2004

In recent years, the smart card is widely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists of reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. In this paper, proposed for the improvement of wireless power transmission and demonstrated the propriety through experiments in several conditions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.49-54
• /
• 2009

This paper proposes a new approach to provide RF communication channel and electric power transmission to overcome the weakness of conventional tests, which may cause several problems. When an RF communication device is used to communicate between launch vehicle and launch complex in stead of using harness umbilical, it may draw the simplicity of ground test equipments, cost-saving, and the reduction of test time. In addition, if an RF power transmission device is adopted to supply on-board power of launch vehicle, it can replace expensive on-board batteries, which may be degraded easily by the repeated charging and discharging processes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.49-55
• /
• 2002

This paper presents high performance MEMS passives using fully CMOS compatible, monolithically integrable 3-D RF MEMS processes for RF and microwave applications. The 3-D RF MEMS technology has been developed and investigated as a viable technological option, which can break the limit of the conventional IC technology. We have demonstrated the versatility of the technology by fabricating various 3-D thick-metal microstructures for RF and microwave applications, such as spiral/solenoid inductors, transformers, and transmission lines, with a vertical dimension of up to $100{\;}\mu\textrm{m}$. To the best of our knowledge, we report that we are the first to construct a fully integrated VCO with MEMS inductors, which has achieved a low phase noise of -124 dBc/Hz at 300 kHz offset from a center frequency of 1 GHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.52-57
• /
• 2015

In this paper, we studies on the RF characteristics of the transmission line employing IPACD (inverted periodically arrayed capacitive devices) on MMIC (monolithic microwave integrated circuit) for application to wireless communication system. According to measured results, the novel transmission line employing IPACD showed a wavelength much shorter than conventional transmission lines. In addition, the IPACD structure showed an effective permittivity much higher than conventional ones. We also extracted the bandwidth characteristic of the IPACD structure using equivalent circuit analysis. According to the results, the cut-off frequency of the proposed structure was 129.2 GHz.