• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.483-490
• /
• 2011

본 논문에서는 주기적 접지구조(PAGS)를 이용하여 실리콘 RFIC 반도체 기판상에 다단 임피던 스변환기를 제작 평가하였다. 제작된 임피던스변환기의 면적은 종래의 약 8.7 %인 0.026 $mm^2$이며, 8 ~ 49.5 GHz의 범위에서 양호한 RF특성을 보여주었다.

• ETRI Journal
• /
• 제36권1호
• /
• pp.106-115
• /
• 2014

In this work, the coplanar waveguide is fabricated on a PES (poly[ether sulfone]) substrate for application to a flexible monolithic microwave integrated circuit, and its RF characteristics were thoroughly investigated. The quality factor of the coplanar waveguide on PES is 40.3 at a resonance frequency of 46.7 GHz. A fishbone-type transmission line (FTTL) structure is also fabricated on the PES substrate, and its RF characteristics are investigated. The wavelength of the FTTL on PES is 5.11 mm at 20 GHz, which is 55% of the conventional coplanar waveguide on PES. Using the FTTL, an impedance transformer is fabricated on PES. The size of the impedance transformer is $0.318mm{\times}0.318mm$, which is 69.2% of the size of the transformer fabricated by the conventional coplanar waveguide on PES. The impedance transformer showed return loss values better than -12.9 dB from 5 GHz to 50 GHz and an insertion loss better than -1.13 dB in the same frequency range.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.53-58
• /
• 2023

본 논문에서는 차동 전력증폭기 출력단에서의 전력 결합 및 임피던스 정합을 위한 LTCC 기반의 RF 트랜스포머를 제시하였다. 기존의 인덕터와 커패시터를 이용한 정합회로 대신 회로의 면적을 덜 차지하며 직류 차단의 역할을 수행하는 트랜스포머를 LTCC 기판에 구현하고 시뮬레이션을 통해 결과를 검증하였다. 트랜스포머의 다운사이징과 결합계수의 개선을 위해 기판의 더 많은 금속층을 사용하는 트랜스포머를 구현하고 시뮬레이션을 통해 기존의 트랜스포머와 성능을 비교하였다. 3개의 금속층을 사용한 기존의 트랜스포머와 5개의 금속층을 사용한 변형된 트랜스포머를 비교한 결과 새롭게 제시한 트랜스포머가 55% 감소된 면적과 25% 증가한 결합계수를 가지며 5GHz에서 약 0.4dB의 삽입손실 개선을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1248-1256
• /
• 2008

In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.

• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.10-15
• /
• 2015

A thin-film transmission line (TFTL) employing a microstrip line/coplanar waveguide (ML/CPW) was fabricated on a silicon substrate for application to a miniaturized on-chip RF component, and the RF characteristics of the device with the proposed structure were investigated. The TFTL employing a ML/CPW composite structure exhibited a shorter wavelength than that of a conventional coplanar waveguide and that of a thin-film microstrip line. When the TFTL with the proposed structure was fabricated to have a length of ${\lambda}/8$, it showed a loss of less than 1.12 dB at up to 30 GHz. The improvement in the periodic capacitance of the TFTL caused for the propagation constant, ${\beta}$, and the effective permittivity, ${\varepsilon}_{eff}$, to have values higher than those of a device with only a conventional coplanar waveguide and a thin film microstrip line. The TFTL with the proposed structure showed a ${\beta}$ of 0.53~2.96 rad/mm and an ${\varepsilon}_{eff}$ of 22.3~25.3 when operating from 5 to 30 GHz. A highly miniaturized impedance transformer was fabricated on a silicon substrate using the proposed TFTL for application to a low-impedance transformation for broadband. The size of the impedance transformer was 0.01 mm2, which is only 1.04% of the size of a transformer fabricated using a conventional coplanar waveguide on a silicon substrate. The impedance transformer showed excellent RF performance for broadband.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.456-461
• /
• 2022

본 논문에서는 차동 증폭기에 필수적으로 필요한 Radio frequency(RF) transformer(TF)을 활용하여 광대역 이득 특성을 가지는 2단 단일 종단 전력증폭기를 제시하였다. RF TF의 특징을 파악하고 광대역 특성을 가지도록 설계한 뒤 2단 전력증폭기의 단간(inter-stage) 임피던스 정합 회로에 적용함으로써 증폭기의 대역폭을 향상시킬 수 있다. 기존의 2단 단일 종단(Single-ended) 증폭기의 성능과 면적을 유지하면서 광대역 이득 특성을 얻을 수 있도록 단간 정합 회로를 Monolithic Microwave Integrated Circuit (MMIC)와 다층 PCB에 구현하고 시뮬레이션을 통해 결과를 비교하였다. InGaP/GaAs HBT 모델을 사용하여 설계한 2단 전력증폭기 모듈을 시뮬레이션 한 결과 중심주파수 3.3GHz에서 기존의 전력증폭기가 11.2%의 fractional 대역폭을 보인 반면 제안된 설계 기법을 적용한 전력증폭기는 19.8%의 개선된 대역폭을 가짐을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1957-1959
• /
• 2000

The PD measurement method is very useful to detect insulation degradation. Recently, the HFPD(High Frequency Partial Discharge) measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires in-service diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In this study, simulated transformer is manufactured and HFPD occurred from simulated transformer is measured with broad band antenna and active-line RF measurement system in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages. Also the PD pattern which was measured with EMC analyzer and RF measurement system is compared.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.255-258
• /
• 1996

This paper describes a DC voltage controller for the DC power supply which is constructed using the full-bridged MOS-FET DC-to-RF power inverter and rectifier. The full-bridged MOS-FET DC-to-RF inverter consisting of four MOSFET arrays and an output power transformer has a control function which is able to control the RF output power when the widths of the pulse voltages which are fed to four MOS-FET arrays of the fall-bridged inverter are changed using the pulse width control circuit. The power conversion efficiency of the full-bridged MOS-FET DC-to-RF power inverter was approximately 85 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The RF output voltage from the full-bridged MOS-FET DC-to-RF inverter is fed to the rectifier circuit through the output transformer. The rectifier circuit consists of GaAs schottky diodes and filters, each of which is made of a coil and capacitors. The power conversion efficiency of the rectifier circuit was over 80 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The output voltage of the rectifier circuit was changed from 34.7V to 37.6 V when the duty cycles of the pulse voltages were changed from 30 % to 50 %.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.562-568
• /
• 2009

In this paper, using the periodic ground structure (PGS), highly miniaturized branch-line coupler and impedance transformer were realized on Si radio frequency integrated circuit (RFIC). The branch-line couple exhibited good RF performance from 41.75 to 50 GHz, and its size was $0.46{\times}0.55mm^2$, which is 37 % of conventional one. The impedance transformer exhibited good RF performance from 1 to 40GHz, and its size was $0.01mm^2$, which is 6.99 % of conventional one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.939-942
• /
• 1998

This paper presents the process on the construction for the remote distribution pole transformer monitoring system. Especially, this system uses CATV cable as communication media which is located in KEPCO's main distribution line. It has four major components such as sensor for measuring secondary voltage and currents of distribution transformer, RF modem for data modulating/de-modulating, communication media for sending/receiving of data, and pc server for monitoring the results of sensing or computing information. This paper also describes the configuration of these each component's configuration and its functions.