• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.886-892
• /
• 2000

In this paper, surface transfer impedance measurement of RF cables according to IEC(International Electrotechnical Commission) Standard 96-1 is described and surface transfer impedance of a commercial RF cable is obtained from the measured voltage and scattering parameter with a triaxial fixture fabricated in the operating frequency range from 1 MHz to 30 MHz.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.514-518
• /
• 2006

We have transferred highly stable 100 MHz RF through a 23 km fiber network. The fiber-induced phase noise due to the vibration and the temperature fluctuation in the optical path is detected and is compensated by configuring a noise-canceling servo. The transfer instability was $6{\times}10^{14}$ at 1 s of averaging time and $2{\times}10^{-17}$ at 10000 s of averaging time. The single sideband phase noise was greatly reduced by more than 20 dB below the Fourier frequency of 1 kHz. The transferred RF has nearly the same stability as the original reference frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1912-1921
• /
• 2015

In this paper, we introduce a testbed for testing the RF energy transfer technology in the Internet of Things (IoT) environment, and provide experimental results obtained by using the testbed. The IoT environment considered in this paper consists of a power beacon, which is able to wirelessly transfers energy via microwave, and multiple sensor nodes, which makes use of the energy received from the power beacon. We have implemented the testbed to experiment the RF energy transfer in such IoT environment. We have used off-the-shelf hardware components to build the testbed and have made the tesbed controlled by software so that various energy and data transmission protocol experiments can easily be conducted. We also provide experimental results and discuss the future research direction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.317-318
• /
• 2006

A transfer loading system for 21' RF band assembly box was developed in the present study. The weight of a box is approximately 60kgf End total weight of one day job per person is about $4,000kg_f$. For an efficient design and manufacturing process, three dimensional design and engineering technique were applied to the presented system. Motion analysis for a popup unit and structural analysis for belt part subjected to the load of box weight were performed, respectively. It was found that the evasion of duty and labor intensity is reduced after appling the developed system to manufacturing field of small and midium business.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5116-5131
• /
• 2017

This paper studies the radio frequency to direct current (RF-DC) conversion efficiency of rectennas applicable to wireless power transfer systems, where multiple receive antennas are arranged in serial, parallel or cascaded form. To begin with, a 2.45 GHz dual-diode rectifier is designed and its equivalent linear model is applied to analyze its output voltage and current. Then, using Advanced Design System (ADS), it is shown that the rectifying efficiency is as large as 66.2% in case the input power is 15.4 dBm. On the other hand, to boost the DC output, three composite rectennas are designed by inter-connecting two dual-diode rectifiers in serial, parallel and cascade forms; and their output voltage and current are investigated using their respective equivalent linear models. Simulation and experimental results demonstrate that all composite rectennas have almost the same RF-DC conversion efficiency as the dual-diode rectifier, yet the output of voltage or current can be significantly increased; in particular, the cascade rectenna obtains the highest rectifying efficiency.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.581-594
• /
• 2024

In this study, a planar printed circuit board (PCB) coil with FR4 substrate was designed and simulated using the finite element method, and the results were analyzed in the frequency domain. This coil can be used in wireless power transfer (WPT) as a transmitter or receiver, eliminating wires. It can also be used as the receiver in radio frequency energy-harvesting (RF-EH) systems by optimizing the planar PCB coil to convert radio-wave energy into electricity, and it can be employed as an excitation (transmitter) or receiver coil in nuclear magnetic resonance (NMR) spectroscopy. This PCB coil can replace the conventional coil, yielding a reduced occupied volume, a fine-tuned design, reduced weight, and increased efficiency. Based on the calculated gain, power, and electromagnetic and electric field results, this planar PCB coil can be implemented in WPT, NMR spectroscopy, and RF-EH devices with minor changes. In applications such as NMR spectroscopy, it can be used as a transceiver planar PCB coil. In this design, at frequencies of 915 MHz and 40 MHz with 5 mm between coils, we received powers of 287.3 μW and 480 μW, respectively, which are suitable for an NMR coil or RF-EH system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1914-1919
• /
• 2006

Video transfer problem on mobile is transfer speed and controls. Compression technique is needed to transfer videos and H.263 codec is used for compression, effectively controls camera on remote places, increased the real time connecting users. In this paper, we could solve the problem that use existent RF, and could transfer the most suitable image and audio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1574-1579
• /
• 2016

This paper presents a self-powered sensor-node scheme using a RF wireless power harvesting techniques for improve drone time of flight. Sensor-node that is proposed is turned when two conditions satisfy: The one is input RF ID data from master-node should be same with sensor-node's ID, and the other one is RF wireless power harvesting system is turned on by hysteresis switch. In this paper, master-node's output is 26 dBm at 263 MHz. Maximum RF to DC power conversion efficiency is about 55% at 4-6 dBm input power condition (2 meter from master-node). The maximum RF wireless power harvesting range is about 13 meter form master-node. And power consumption of the sensor-node's load elements such as transmitter, MCU and temperature sensors is approximately average 15 mA at 5.0 V for 10 msec.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.30-33
• /
• 2015

In this paper, we proceeded a study on the Hybrid RF based development of the smart phone Application skin disease monitoring using CMOS camera. we proposed an image transfer technology which can use the CMOS camera and we developed the smart phone application which can be possible to use a remote monitoring for skin disease. Image transfer technology using Hybrid RF communication applied for WiFi using CMOS camera. We implemented the function which can use a remote monitoring using Wi-Fi. These suggestion can be a good example for endoscopic applications using hybrid RF based smart phone application of skin disease monitoring using CMOS camera.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.5
• /
• pp.411-422
• /
• 2014

In this study, spatial and temporal variations of radiative forcing (RF) and mean temperature changes due to greenhouse gases ($CO_2$, $CH_4$, and $N_2O$) emitted from commercial aircraft were examined based on the simplified expression at the airports in Korea during 2009~2010. The radiative transfer model (SBDART) was used to compare with the RF and mean temperature changes calculated from the simplified expressions for greenhouse gas $CO_2$. The RF simulated by the SBDART was about 67% higher than that of the simplified expression, on average. The highest mean RF (up to $9.0mW/m^2$ for $CO_2$) and mean temperature changes (up to $9.7{\times}10^{-5}^{\circ}K/day$ for $CO_2$) for all GHGs occurred at Ulsan airport during the study period, whereas the lowest RF and temperature changes at Yangyang (for $CO_2$) and Sacheon airports (for $CH_4$ and $N_2O$). In the case of $CH_4$ and $N_2O$, their effects to the RF and mean temperature change were negligible compared to $CO_2$.