The Journal of Korean Institute of Electromagnetic Engineering and Science (한국전자파학회논문지)

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지

Surface Transfer Impedance Measurement of RF Cable according to IEC Standard 96-1

IEC Standard 96-1에 따른 RF 케이블의 표면전달 임피던스 측정

  • 강진섭 (한국표준과학연구소 전자기표준부 전자파연구실) ;
  • 김정환 (한국표준과학연구소 전자기표준부 전자파연구실) ;
  • 강웅택 (한국표준과학연구소 전자기표준부 전자파연구실) ;
  • 박정일 (한국표준과학연구소 전자기표준부 전자파연구실)
  • Published : 2000.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, surface transfer impedance measurement of RF cables according to IEC(International Electrotechnical Commission) Standard 96-1 is described and surface transfer impedance of a commercial RF cable is obtained from the measured voltage and scattering parameter with a triaxial fixture fabricated in the operating frequency range from 1 MHz to 30 MHz.

본 논문에서는 IEC(International Electrotechnical Commission) Standard 96-1에 규정된 RF 케이블의 표현전달 임피던스 측정법을 설명하고, 1 MHz ~ 30MHz 동작주파수범위에서 설계 제작된 triaxial fixture를 사용해 전압 및 산란계수를 측정하여 상용 RF 케이블의 표면전달 임피던스를 얻었다.

Keywords

References

  1. Cable Shielding for Electromagnetic Compatibility A. Tsaliovich
  2. Radio-frequency cables 96-1 - Part 1: General requirement and measuring methods (4th ed.) IEC-TC46(SC46A)
  3. Microwave Opt. Technol. Lett. v.12 Rapid method for measurement of cable surface transfer impedance T. M. Benson;C. F. Cheng;P. A. Cudd
  4. IEEE Trans. Electromagn. Compat. v.40 Surface transfer impedance measurement: A comparison between current probe and pull-on braid methods for coaxial cables A. Morriello;T. M. Benson;A. P. Duffy;C. F. Cheng
  5. IEEE Trans. Electromagn. Compat. v.26 A fast, accurate, and sensitive method for measuring surface transfer impedance A. R. Martin;M. Mendenhall