• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.2337-2339
• /
• 2016

Electronic presentations have become useful tools for surgeons, other clinicians and patients, facilitating medical and legal support and scientific research. Microsoft(R) PowerPoint is by far and away the most commonly used computer-based presentation package. Setting up surgical clinical cases with PowerPoint makes it easy to register and follow patients for the purpose of discussion of treatment plan or scientific presentations. It facilitates communication between professionals, supervising clinical cases and teaching. It is ofter useful to create a template to standardize the presentation, offered by the software through the slide master. The purpose of this paper was to show a simple and practical method for creating a Microsoft(R) PowerPoint template for use in presentations comcerning oral and maxillofacial cancer.

• 소성∙가공
• /
• 제17권4호
• /
• pp.249-256
• /
• 2008

Combined phase transformation and heat transfer was considered on the simulation of hot press forming process, using material properties modeler, $JMatPro^{(R)}$ and a finite element package, $DEFORM^{TM}$-HT. In order to obtain high temperature mechanical properties and flow curves for different phases, a material properties modeler, $JMatPro^{(R)}$ was used, avoiding expensive and extensive high temperature materials tests. The results successfully show that the strength of hot press forming parts may exhibit different strength in the same parts, depending on the contact of blank with tooling. It was also shown effectively that the strength of the parts can be controlled by designing appropriate cooling paths and coolants. This was shown in terms of different heat convection coefficient in the calculation. Overall, current combination of software was shown to be an effective tool for the tool and process design of hot forming process, although the material modeler needs to be additionally verified by an appropriate set of high temperature materials test.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1529-1543
• /
• 2005

Recently an unmanned aerial vehicle (UAV) has been widely used for military and civil applications. The role of a navigation system in the UAV is to provide navigation data to the flight control computer (FCC) for guidance and control. Since performance of the FCC is highly reliant on the navigation data, a fault in the navigation system may lead to a disastrous failure of the whole UAV. Therefore, the navigation system should possess a fault detection and isolation (FDI) algorithm. This paper proposes an attitude determination GPS/INS integrated navigation system with an FDI algorithm for a UAV. Hardware for the proposed navigation system has been developed. The developed hardware comprises a commercial inertial measurement unit (IMU) and the integrated navigation package (INP) which includes an attitude determination GPS (ADGPS) receiver and a navigation computer unit (NCU). The navigation algorithm was implemented in a real-time operating system with a multi-tasking structure. To evaluate performance of the proposed navigation system, a flight test has been performed using a small aircraft. The test results show that the proposed navigation system can give accurate navigation results even in a high dynamic environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1559-1561
• /
• 1994

At present, the principle of puffer action in high current interruption is adopted in almost of the EHV(Extra High Voltage) and UHV(Ultra High Voltage) GCB(Gas Circuit Breakers). The thermal interruption capability of these GCBs critically depends on the pressure rise in the puffer cylinder at current zero. The pressure rise in the puffer cylinder depends on the puffer cylinder volume, flow passage and leakage area in the interrupter, stroke curve etc. Recently commercial CFD(Computational Fluid Dynamics ) packages have been widely adopted to calculate the pressure distribution in the interrupter. However, there are still several problems with it, e.g. very expensive price, moving boundary problem, computation time, difficulty in using the package etc. Thus, the calculation of the puffer cylinder pressure in simple and relatively correct method is essential in early stage of GCB design. In these paper, the model ing technique and computed results for EHV class GCB (HICO, 145kV 40kA and 362kV 40kA GCB) are presented and compared with available measured results.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.290-297
• /
• 2020

Purpose: This study aimed at exploring the impacts of organizational conflict and job satisfaction on the turnover intention among dental technicians. Methods: This study utilized a descriptive research design. A structured questionnaire was administered to 159 dental technicians. Of the collected questionnaires, data from 127 valid questionnaires were analyzed using t-tests, analysis of variance, Pearson's correlation coefficient, and hierarchical multiple regression using the IBM SPSS 20.0 statistical package. Results: A positive correlation was identified between organizational conflict and turnover intention (r=0.46, p<0.001); however, a negative correlation was shown between job satisfaction and turnover intention (r=-0.50, p<0.001). A hierarchical multiple-regression model was employed to analyze working hours, unfair treatment from dentists and dental hygienists, organizational conflict, and job satisfaction, which contributed to providing an explanation to 39% of the turnover intention of dental technicians (F=14.16, p<0.001). Furthermore, organizational conflict (β=0.32, p<0.001), job satisfaction (β=-0.31, p=0.003), and working hours (β=0.21, p=0.010) were all shown to affect turnover intention. Conclusion: The impact of the negative consequences of organizational conflict and working hours on the turnover intention should be considered within core strategies for increasing the turnover periods for dental technicians.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.34-38
• /
• 2001

We suggested new PDP packaging technology using the direct joint method, which does not need an exhausting hole and tube. The advantages of this method are simple process, short process time and time panel package. To packaging, we drew the seal line of glass frit by dispenser followed by forming the lump, which provide pumping-out path during the packaging process. And, we have performed a pretreatment of glass frit to reduce the out-gases. After which, both front and rear glass plates were aligned and loaded into vacuum packaging chamber. The 4-inch monochrome AC-PDP was successfully packaged and fully emitted with brightness of 1000 $cd/m^2$. Also, glass frit properties for pretreatment condition was investigated by AES and SEM analyses.

• Journal of the Korean Data and Information Science Society
• /
• 제25권6호
• /
• pp.1221-1229
• /
• 2014

30년 동안의 K-리그 자료를 득점과 실점이 서로 상관이 있다는 가정과 R 패키지를 사용하여 12개의 서로 다른 이변량 포아송모형에 적합시켰다. 그 결과 AIC와 BIC 판정기준 아래에서 공변량 효과가 상수인 이변량 포아송모형이 가장 타당하며, 영과잉 및 대각확대 모형은 필요하지 않은 것으로 나타났다. 제안된 모형은 홈경기의 효과, 팀별 공격능력과 수비능력 및 적합도를 구하는 데 사용될 수 있다.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.8-12
• /
• 2003

TO-can 레이저 다이오드를 사용한 광송수신기 모듈의 주파수 대역의 특성을 관찰하였다. 레이저 다이오드의 등가회로를 추출하기 위한 R-L-C변수는 임피던스 분석기를 이용하였다. 칩콘덴서를 사용하여 패키지내의 도선에 의한 인덕턴스 성분과의 임피던스 정합을 시도하였으나 저주파수 대역에서 공진으로 인한 경사가 발견되었다. 표면실장 형으로 소자를 구성하여 사용함으로써 공진주파수를 이동시켜 원하는 주파수 대역에서 공진 경사를 제거할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.30-32
• /
• 1995

The model interrupters of $SF_6$ gas electromagnetic contactor whose ratings are the voltage of 7.2kV and the short circuit current of 4.0kA have been designed and manufactured on the basis of theoretical and computational analysis for its development. The eddy current analysis, the magnetic field analysis and the calculation of the rotational force on arcs have been conducted using FLUX2D package. The short circuit current interrupting tests have been conducted to the model interrupters using the simplified capacitive synthetic test circuit in KERI. The results show that the model interrupters have a sufficient interrupting capability and the new design concept is proper for a good interrupting performance.

• 지질학회지
• /
• 제54권6호
• /
• pp.683-694
• /
• 2018

섭입은 지구의 물질 및 에너지 순환에서 중요한 역할을 담당할 뿐만 아니라 우리의 삶에 밀접한 지질 현상인 지진과 호화산을 발생시키므로 많은 연구가 이루어져 왔다. 그 중에서 맨틀 내부의 섭입해양판처럼 우리가 직접 관찰할 수 없는 곳에서 발생하는 지질 현상에 대한 정량적 연구에 컴퓨터 수치모델링이 널리 이용되어 왔다. 이 연구에서는 다양한 연구진들에 의해 사용되고 있는 섭입대 수치모델링의 벤치마크를 수행하였다. 섭입대 수치모델링을 위하여 유한요소법 기반 상용 소프트웨어인 콤솔 멀티피직스를 사용하였으며 계산된 결과는 과거 수행된 벤치마크 결과와 잘 일치하였다.