• 천문학회지
• /
• 제32권2호
• /
• pp.91-107
• /
• 1999

We present BVRI CCD photometry and near-infrared K photometry of the intermediate-aged open cluster NGC 7790. The reddening, E(B - V) = 0.54 $\pm$ 0.05 and the distance modulus, (m - M)o = 12.45 $\pm$ 0.10 for the cluster were determined by zero-age-main-sequence fitting and theoretical isochrone fitting using not only (V, B - V), (V, V - 1), (V, V - R) but also (V, V - K) color-magnitude diagrams. The reddening corresponded approximately to the average value derived from previous studies, while the distance modulus was found to be almost midway between the CCD photometric results of Romeo et al. (1989) and those of Mateo & Madore (1988). We have used four colors to distinguish members from field stars. The expected colors were calculated using the derived distance modulus, and were then were compared with the observed colors (B - V), (V - 1), (V - R), and (V - K). Thus, a color excess E(B - V) for each star was determined which could give the minimum difference between the calculated and observed colors. Single and binary members of the cluster were determined on the basis of the E(B - V) distribution of stars.

• 한국통신학회논문지
• /
• 제18권2호
• /
• pp.207-217
• /
• 1993

본 논문에서는 송신된 확산부호와 수신기 내의 기준 확산부호 사이의 위상차에 대한 사전 확률을 알고 있을 때, 동기가 맞을 확률이 높은 셀부터 낮은 셀의 순서로 검사하는 Expanding Window Search 방법을 이용하여 직접확산(Direct Sequence) 통신 시스팀의 초기동기 과정의 상태도를 구성한다. 각 검색에서 앞선 검색 때보다 증가하는 윈도우를 초항이 a고 공비가 r인 등비 수열의 형태로 증가하도록 하였으며, 마코프처리(Markov process)와 메이슨 이득공식(Mason’s gain formula)을 이용하여 상태도를 해석하고 평균 시간을 구한다. 그리고 검색 횟수 n과 검출 확률 $P_d$의 변화에 따른 평균동기 시간의 증감을 사전 확률이 없을 때의 평균등기 시간과 비교한다.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.131-147
• /
• 2013

In this paper, constraint-based fracture mechanics analyses of hollow cylinders with internal circumferential crack under tensile loading are conducted. Finite element analyses of the cracked cylinders are carried out to determine the fracture parameters including elastic T-stresses, and fully-plastic J-integrals. Linear elastic finite element analysis is conducted to obtain the T-stresses, and elastic-plastic analysis is conducted to obtain the fully plastic J-integrals. A wide range of cylinder geometries are studied, with cylinder radius ratios of $r_i/r_o$ = 0.2 to 0.8 and crack depth ratio a/t = 0.2 to 0.8. Fully plastic J-integrals are obtained for Ramberg-Osgood power law hardening material of n = 3, 5 and 10. These fracture parameters are then used to construct conventional and constraint-based failure assessment diagrams (FADs) to determine the maximum load carrying capacity of cracked cylinders. It is demonstrated that these tensile loaded cylinders with circumferential cracks are under low constraint conditions, and the load carrying capacity are higher when the low constraint effects are properly accounted for, using constraint-based FADs, comparing to the predictions from the conventional FADs.

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.409-417
• /
• 2019

The choice of individual material for industrial application is primarily based on knowledge of its behavior in similar applications and similar environmental conditions. Contemporary design implies knowledge of material behavior and knowledge in the area of structural analysis supported by large capacity computers. Bearing this in mind, this paper presents and analyzes the experimental results related to the mechanical properties of the material considered (30CrNiMo8/1.6580/AISI 4340) at different temperatures as well as its creep and fatigue behavior. All experimental tests were carried out as uniaxial tests. The test results related to the mechanical properties are presented in the form of engineering stress-strain diagrams. The results related to the creep behavior of the material are shown in the form of creep curves, while the fatigue of the material is shown in the form of stress - life (S - N) diagram. Based on these experimental results, the values of the following properties are determined: ultimate tensile strength (${\sigma}_{m,20}=696MPa$), yield strength (${\sigma}_{0.2,20}=355.5MPa$), modulus of elasticity ($E_{,20}=217GPa$) and fatigue limit (${\sigma}_{f,20,R=-1}=280.4MPa$). Results related to fatigue tests were obtained at room temperature and stress ratio R = -1.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.519-524
• /
• 2018

Carbon/carbon composites (C/C) have been widely studied in the aerospace field because of their excellent thermal shock resistance and specific strength at high temperature. However, they have the problems that is easily oxidized and deteriorated under atmospheric environment. In order to overcome these shortcomings, the CVD coating of ultra-high-temperature ceramics to C/C has become an important technical issue. In this study, thermodynamic calculations were performed to TaC CVD coating on C/C by FactSage 6.2 program. The Ta-C phase diagrams were constructed with the results of thermodynamic calculations in the Ta-C-H-Cl system. Based on the Ta-C phase diagram, the experimental conditions were designed to confirm the deposition of various phases such as TaC single phase, TaC + C and $TaC+Ta_2C$ by varying the composition of Ta/C ratio. The deposited films were found to be in good agreement with the predicted phases.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.827-839
• /
• 2021

Due to climate change and population growth, water scarcity is getting worse all over the world. Among various methods for desalination of seawater, the Multi-Effect Adsorptive Desalination method, which combines the existing Multi-Effect Desalination method and the Adsorptive Desalination method and can produce high-concentration-high-concentration freshwater, is emerging. Because the Multi-Effect Adsorptive Desalination method combines the two different methods, the system becomes complicated and the possibility of failure increases. Therefore, in this study, availability analysis was performed on the Multi-Effect Adsorptive Desalination process. A total of four types of reliability block diagrams were presented, and availability analysis was conducted based on them. The first form of a reliability block diagram is configured in series without any redundancy. The availability of the reliability block diagram composed of the serial system was found to be lower than the required availability. In order to increase availability, the redundancy to pumps and boiler are added to system. As a result of availability analysis, it was confirmed that designing desalination systems with redundancy to pump meets the 93% availability, which is typically required availability for various plants.

• Journal of Pharmaceutical Investigation
• /
• 제37권6호
• /
• pp.339-347
• /
• 2007

SMEDDS is mixture of oils, surfactants, and cosurfactants, which are emulsified in aqueous media under conditions of gentle agitation and digestive motility that would be encountered in the gastro-intestinal(GI) tract. The main purpose of this work is to prepare self-microemulsifying drug delivery system(SMEDDS) for oral bioavailability enhancement of a poorly water soluble drug, atorvastatin calcium. Solubility of atorvastatin calcium was determined in various vehicles. Pseudo-ternary phase diagrams were constructed to identity the efficient self-emulsification region and particle size distributions of the resultant micro emulsions were determined using a laser diffraction sizer. Optimized formulations for in vitro dissolution and bioavailability assessment were $Capryol^{(R)}$ 90(50%), Tetraglycol(16%), and $Cremophor^{(R)}$ EL(32%). The release rate of atorvastatin from SMEDDS was significantly higher than the conventional tablet ($Lipitor^{(R)}$), 2-fold. Our studies illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as atorvastatin calcium by the oral route.

• 천문학회지
• /
• 제56권1호
• /
• pp.97-115
• /
• 2023

We present the deep homogeneous UBV RI photometric data of 135,071 stars down to V ~ 23 mag and I ~ 22 mag toward the Carina Nebula. These stars are cross-matched with those from the previous surveys in the X-ray, near-infrared, and mid-infrared wavelengths as well as the Gaia Early Data Release 3 (EDR3). This master catalog allows us to select reliable members and determine the fundamental parameters distance, size, stellar density of stellar clusters in this star-forming region. We revisit the reddening toward the nebula using the optical and the near-infrared colors of early-type stars. The foreground reddening [E(B-V)_fg] is determined to be 0.35 ± 0.02, and it seems to follow the standard reddening law. On the other hand, the total-to-selective extinction ratio of the intracluster medium (R_V,cl) decreases from the central region (Trumpler 14 and 16, R_V,cl ~ 4.5) to the northern region (Trumpler 15, R_V,cl ~ 3.4). It implies that the central region is more dusty than the northern region. We find that the distance modulus of the Carina Nebula to be 11.9 ± 0.3 mag (d = 2.4 ± 0.35 kpc) using a zero-age main-sequence fitting method, which is in good agreement with that derived from the Gaia EDR3 parallaxes. We also present the catalog of 3,331 pre-main-sequence (PMS) members and 14,974 PMS candidates down to V ~ 22 mag based on spectrophotometric properties of young stars at infrared, optical, and X-ray wavelengths. From the spatial distribution of PMS members and PMS candidates, we confirm that the member selection is very reliable down to faint stars. Our data will have a legacy value for follow-up studies with different scientific purposes.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.63-70
• /
• 2009

This paper discusses the influence on long-tenn predictions of the ship response in ocean by using the Global Wave Statistics data, GWS, and wave information from the remote sensing satellites. GWS's standard scatter diagrams of significant wave height and zero-crossing wave period are suggested to be corrected to a round number of 0.01/1000 fitted with a statistical analytic model of the conditional lognormal distribution for zero-crossing wave period. The GEOSAT satellite data are utilized which presented by I. R. Young and G. J. Holland (1996, named as GEOSAT data). At first, qualities of this data are investigated, and statistical characteristic trends are studied by means of applying known probability distribution functions. The wave height data of GEOSAT are compared to the data observed onboard merchant ships, the data observed by measure instrument installed on the ocean-going container ship and so on. To execute a long-tenn prediction of ship response, joint probability functions between wave height and wave period are introduced, therefore long-term statistical predictions are executed by using the functions.

• 천문학회지
• /
• 제36권1호
• /
• pp.13-19
• /
• 2003

We present a study of the old open cluster Trumpler 5 (Tr 5), based on the CDS archival data. From the color-magnitude diagrams of Tr 5, we have found the positions of main-sequence turn-off (MSTO) and red giant clump (RGC) stars. Using the mean magnitude of the RGC stars, we have estimated the reddening toward Tr 5, E(B - V) = 0.60 $\pm$ 0.10. Using the stars common in two data sets and the theoretical isochrones of Padova group, we have estimated the distance modulus $V_o - M_v = 12.64 {\pm} 0.20 (d = 3.4 {\pm} 0.3 kpc)$, the metallicity [Fe/H) = -0.30 $\pm$ 0.10, and the age of 2.4 $\pm$ 0.2 Gyr (log t = 9.38). These metallicity and distance values are consistent with the relation between the metallicity and the Galactocentric distance of other old open clusters, for which we obtain the slope of ${\Delta}[Fe/H]/ R_{gc} = -0.064 {\pm} 0.010\;dex\;kpc^{-1}$.