• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1990년도 춘계 학술대회지
• /
• pp.38-39
• /
• 1990

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1542-1543
• /
• 2007

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristics were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Using the water based ink of viscosity of 11.8 cps and surface tension of 0.025N/m, it is possible to eject stable droplets through 64 nozzles average velocity of 4.05 m/s with standard deviation of 0.06 m/s and average diameter of $29.2\;{\mu}m$ with standard variation of $0.5\;{\mu}m$.

• 분석과학
• /
• 제33권1호
• /
• pp.1-10
• /
• 2020

Alpha lipoic acid, an antioxidant, is widely used for treatment of various diseases. It is a racemic mixture, with R-(+)-α lipoic acid exhibiting greater potency, bioavailability, and effectiveness than those of the S-form. Thus, selective R-(+)-α lipoic acid has been recently used in various applications, necessitating the development of a method to test the enantiomeric impurity in R-(+)-α lipoic acid. We developed a simple and fast high-performance liquid chromatography method using a new immobilized amylose-based chiral column (Chiralpak IA-3). Design of experiment was applied to accurately predict the effects and interactions among various factors affecting the analytical parameters and to optimize the chromatographic conditions. This optimized method could completely separate the two enantiomer peaks with a resolution > 1.8 within a short running time (9 min). Then, the optimized method was validated according to the guidelines of the International Conference on Harmonization and applied for quantification of S-(-)-α lipoic acid in some commercial R-(+)-α lipoic acid tromethamine raw material. Our results suggested that the developed method could be used for routine quality control of R-(+)-α lipoic acid products.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.47-61
• /
• 2013

This study compares the Residual ultimate longitudinal strength - grounding Damage index (R-D) diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM) and the design formula (modified Paik and Mansour) method - used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS) technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.

• Journal of Microbiology and Biotechnology
• /
• 제17권4호
• /
• pp.668-672
• /
• 2007

A microcosmal experiment using a metagenomic technique was designed to assess the effect of BTEX (benzene, toluene, ethylbenzene, and xylenes) on an indigenous bacterial community in a Daejeon forest soil. A compositional shift of bacterial groups in an artificial BTEX-contaminated soil was examined by the 16S rDNA PCR-DGGE method. Phylogenetic analysis of 16S rDNAs in the dominant DGGE bands showed that the number of Actinobacteria and Bacillus populations increased. To confirm these observations, we performed PCR to amplify the 23S rDNA and 16S rDNA against the sample metagenome using Actinobacteria-targeting and Bacilli-specific primer sets, respectively. The result further confirmed that a bacterial community containing Actinobacteria and Bacillus was affected by BTEX.

• 지구물리와물리탐사
• /
• 제16권1호
• /
• pp.59-62
• /
• 2013

우리는 구면일부지역에서의 퍼텐셜마당에 대하여 구면의 곡률을 고려하는 새로운 상향연속방법을 이전에 보고하였다. 그런데, 이 방법은 실제로 $r_2/r_1$의 비율(즉, 목표면의 반경 $r_2$ 대 자료면의 반경 $r_1$) 만을 달리함으로써 하향연속에도 그대로 사용될 수 있다. 한편, 이 방법에 내재된 구면의 기하학적 성질에 기인하는 문제와 그에 대한 대책을 기술하였다.

• Computers and Concrete
• /
• 제1권4호
• /
• pp.389-400
• /
• 2004

The examinations carried out have confirmed a relationship existing between the character of fracture surfaces and the composition and structure of (basalt and gravel) concretes. For both concretes investigated, a very good correlation was obtained between the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$. With the increase in the $R_L$ parameter, the fracture surface development factor $R_S$ also increased. Agreement between the proposed relationship of $R_S=f(R_L)$ and the proposal given by Coster and Chermant (1983) was obtained. Stereological examinations carried out along with fractographic examinations made it possible to obtain a statistical model for the determination of $R_L$ (or $R_S$) based on the volume of air voids in concrete, $V_{air}$, the specific surface of air pores, $S_V_{air}$ the specific surface of coarse aggregate, $S_{Vagg.}$, and the volume of mortar, $V_m$. An effect of coarse aggregate type on the obtained values of the profile line development factor, $R_L$, as well as on the relationship $R_S=f(R_L)$ was observed. The increment in the fracture surface development factor $R_S$ with increasing $R_L$ parameter was larger in basalt concretes than in gravel concretes, which was a consequence of the level of complexity of fractures formed, resulting chiefly from the shape of coarse aggregate grains.

• 미생물학회지
• /
• 제42권2호
• /
• pp.156-159
• /
• 2006

Escherichia coli 16S rRNA의 잘 보존된 부분인 790 loop의 즉흥진화를 통한 분석에서 리보솜의 단백질 수행기능을 위해서 필수불가결한 것으로 추측되는 789번 위치에 염기치환을 유발하여 제작한 변이체 리보솜의 기능을 chloramphenicol acetyltransfernse mRNA의 단백질로의 번역능력 차이에 따른 chloramphenicol에 대한 저항성의 정도를 측정함으로써 분석하였다. 예상했던 바와 같이 모든 변이체 리보솜의 단백질 합성능력은 현저히 저하되었으며, 789 염기의 단백질합성에서의 기능을 규명하기 위하여 16S rRNA 변이체의 기능을 회복시키는 이차복귀돌연변이(second-site revertant)를 발췌하는 효과적인 유전학적 실험방법을 개발하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 춘계학술발표회
• /
• pp.85-92
• /
• 2006

모든 원유(crude oil) 와 연료유(refined petroleum) 는 서로 구별되는 개별 탄화수소 특성을 가지고 있다. 원유의 경우 산지별로 고유한 특성을 지니고 있으며, 연료유의 경우 같은 유종이라 할지라도 그 원료가 되는 원유의 특성, 또는 생산공정, 생산시기 등에서 차이점이 발생하고 생산시기가 동일한 통일유종의 기름이더라도 선박의 연료탱크 내에 남아있는 잔류물과의 혼합 등에 의해 구별될 수 있는 특징을 가지게 된다. 유지문기법(oil fingerprint method)은 이러한 특성을 이용하여 해상유출유의 오염원을 밝히기 위한 감식 분석기법을 말한다. 현재의 유용한 유지문기법으로는 기체크로마토그래피 (GC)를 이용한 포화탄화수소류 방향족탄화수소류 황화합물 패턴분석방법과 적외선분광광도계(IR)를 이용한 적외선스펙트럼 측정방법 그리고 형광분광광도계(FL)를 이용한 방향족탄화수소류 스펙트럽분석방법 둥이 있으며 GC/MS를 이용한 EICs(Extracted Ion Chromatograms) 패턴분석방법이 있다.

• Korean Journal of Radiology
• /
• 제22권3호
• /
• pp.405-414
• /
• 2021

Objective: To compare two clinically available MR volumetry software, NeuroQuant^® (NQ) and Inbrain^® (IB), and examine the inter-method reliabilities and differences between them. Materials and Methods: This study included 172 subjects (age range, 55-88 years; mean age, 71.2 years), comprising 45 normal healthy subjects, 85 patients with mild cognitive impairment, and 42 patients with Alzheimer's disease. Magnetic resonance imaging scans were analyzed with IB and NQ. Mean differences were compared with the paired t test. Inter-method reliability was evaluated with Pearson's correlation coefficients and intraclass correlation coefficients (ICCs). Effect sizes were also obtained to document the standardized mean differences. Results: The paired t test showed significant volume differences in most regions except for the amygdala between the two methods. Nevertheless, inter-method measurements between IB and NQ showed good to excellent reliability (0.72 < r < 0.96, 0.83 < ICC < 0.98) except for the pallidum, which showed poor reliability (left: r = 0.03, ICC = 0.06; right: r = -0.05, ICC = -0.09). For the measurements of effect size, volume differences were large in most regions (0.05 < r < 6.15). The effect size was the largest in the pallidum and smallest in the cerebellum. Conclusion: Comparisons between IB and NQ showed significantly different volume measurements with large effect sizes. However, they showed good to excellent inter-method reliability in volumetric measurements for all brain regions, with the exception of the pallidum. Clinicians using these commercial software should take into consideration that different volume measurements could be obtained depending on the software used.