• 기술혁신연구
• /
• 제8권1호
• /
• pp.155-172
• /
• 2000

Management control is the process by which managers ensure that resources are obtained and used effectively and efficiently in achieving the organization's objectives. This paper explores relationships between characteristics of R&D and management control. R&D characteristics measured in this research include the degree of technological uncertainty and the measurability of outputs. Management control was classified and categorized into observable dimensions of control such as behavior, budget, process, results and personnel control. The relationships were tested with questionnaire survey data from a sample of 206 principal investigators(PIs) in the thirteen Government supported research institutes(GSRIs) in Korea. There are significant negative relations between the degree of technological uncertainty and budget, process and personnel control, and significant positive relations between the measurability of outputs and process, results and personnel control. These results indicate that the relations between task characteristics and management control in R&D are different from those to be found in other activities of organizations.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.387-395
• /
• 2011

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

• 무역상무연구
• /
• 제38권
• /
• pp.377-408
• /
• 2008

Globalization of R&D activities of multinational firms is becoming important in compared with the past, because of increasing globalization of world economy. So, every country tries to attract foreign investment including R&D activities. In this paper, effects of several factors, which determine the scale of foreign subsidiary's R&D activities in local market, are analyzed. Through the review of previous literature, I found that three groups of determinant factors. The first one is the factor which is related to characteristics of local market, such as competitive situation of local market, accessability to research institutions, etc. The second group is the factor which is related to relationship between foreign subsidiary and its mother company. The dominant factors of this group are operation strategy of foreign subsidiary, competitiveness of mother firm, and equity structure of foreign subsidiary. Finally the characteristics of industry affect to the scale of foreign subsidiary's R&D activities. Among these factors, 6 factors are chosen to investigate empirically. For the empirical investigation, 107 foreign subsidiaries among KOITA(Korea Industrial Technology Association)'s list are chosen. Each subsidiary has more than 50% of foreign equity and implement R&D activities in Korea. The results show that sales volume of foreign subsidiary is dominant influencing factor in determining scale of R&D activities in Korean market. And also I found that currently established firms are implementing more R&D activities than old established firms. This is quite interesting finding. However, R&D activities of foreign subsidiary are not vitalized in Korean market. It probably means that Korean government and Korean business partners have to make effort to enhance foreign firms/ R&D activities, because it could contribute technological and economic development of Korean market.

• 한국재난정보학회 논문집
• /
• 제10권2호
• /
• pp.208-218
• /
• 2014

재난 안전사고에 따른 피해액 증가 및 재난 안전 관련 산업의 성장은 소방방재 R&D 사업에 대한 과학적 성과평가의 필요성을 높여 주고 있다. 2004~2011년 동안의 소방방재 R&D 성과분석 결과에 따르면 성과유형에 있어서 학술적 성과와 공공적 성과가 다수를 이룬다. 그리고 연구수행주체와 연구개발단계별로 성과유형의 특성이 있음을 확인하였다. 이와 같은 결과는 연구수행주체별 성과물의 특성과 연구개발단계별 성과물의 특성을 감안하여 연구과제 선정평가 시 적절한 연구수행 주체와 과학기술분야의 선정과 수행 주체별 성과목표 설정의 적절성을 판단하는데 활용할 수 있을 것으로 보인다. 아울러 성과관리를 위한 기초적인 자료로 활용될 것으로 보인다. 향후 이와 같은 소방 방재 특성을 개선하기 위한 방안을 마련하기 위한 연구를 전문적으로 수행할 필요가 있는 것으로 보인다.

• 한국IT서비스학회지
• /
• 제17권3호
• /
• pp.77-100
• /
• 2018

As the importance of R&D has recently become more important, the budget for national R&D projects has continued to grow. Along with, there is a growing awareness to use and manage R&D funds transparently. This study examines the relationship among attitude toward the behavior (ATT), subjective norm (SN), perceived behavioral control (PBC) and behavioral Intention (BI) deriving from TPB (Theory of planned Behavior). To empirically prove the hypothesis, the statistical analysis were conducted based on the response from the 2,021 RCMS users, using SPSS 21.0 and AMOS 21.0. The research model variable consists of ATT, SN, PBC, BI, person type, RCMS characteristics. The results of study can be summarized as follows. First, ATT, SN, PBC have the positive effect on BI. Second, According to the type of person (Director, R&D supporter), there is no difference in ATT on BI but there is a difference in SN (or PBC) on BI. Third, The type of person have moderating effects in the relationship between ATT and BI. Finally, All RCMS characteristics have moderating effects in the relationship between ATT and BI. Some RCMS characteristics have moderating effects in the relationship between PBC and BI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.339-343
• /
• 2006

We observed the application possibility of inductive coupler for the underground high-voltage power line communication by means of analysis of signal transmission characteristics and magnetic properties on annealing temperatures for high-permeability Fe-base amorphous alloys. The best electromagnetic and transmission characteristics were shown in nano-crystalline precipitated alloy annealed at temperature $510^{\circ}C$. The transmission characteristics in the low-frequency band depend on permeability of magnetic core materials and its properties of high-frequency band can be improved by impedance matching. Using the high pass filter embedded in the coupler, other noise signal band except for communication signals could be cut off.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.504-507
• /
• 2002

We investigated electro-optic and ionic properties of twisted nematic cells by using control of chiral pitch. These properties are observed in practical experiment and simulations. C-V and V-T curve characteristics were obtained from three types of cells with d/p. It is shown that d/p ratio of short cells exhibit faster response time improved by 20% than normal cell. Also, inter-gray response time is improved each rise time and decay time. And, the increase of saturation voltage is happened because of the small twist angel change from initial state at high voltage near 5V. To compensate for longer black level tail, gamma curve index was varied from g = 2.2 to g = 2.7 in module status. Additionally, adding chiral dopant into TN cells improved ionic characteristics such as increasing VHR, Ion density and DC Hysteresis were decreased..

• 산업공학
• /
• 제22권3호
• /
• pp.192-204
• /
• 2009

Based on the characteristics of 'Korean electric power industry R&D programs', this study proposes a new performance evaluation framework where electric power industry related R&D projects are scrutinized. The abovementioned R&D programs have their own goals and especially they emphasize the effectiveness as well as the efficiency of each subordinate R&D project. Hence, in this framework, a performance evaluation procedure is established and then a mathematical model is developed according to the procedure. The model calculates performance evaluation indices for a set of R&D projects integrating the effectiveness with the efficiency of each R&D project. In a case study with an empirical dataset, statistical significance is tested on the integrated performance evaluation indices of R&D projects regarding organizational types and program categories considered.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권2호
• /
• pp.68-73
• /
• 2006

We propose a damascene gate FinFET with Si nanocrystals implemented on bulk silicon wafer for low voltage flash memory device. The use of optimized SRON (Silicon-Rich Oxynitride) process allows a high degree of control of the Si excess in the oxide. The FinFET with Si nanocrystals shows high program/erase (P/E) speed, large $V_{TH}$ shifts over 2.5V at 12V/$10{\mu}s$ for program and -12V/1ms for erase, good retention time, and acceptable endurance characteristics. Si nanocrystal memory with damascene gate FinFET is a solution of gate stack and voltage scaling for future generations of flash memory device. Index Terms-FinFET, Si-nanocrystal, SRON(Si-Rich Oxynitride), flash memory device.