• 경영과학
• /
• 제29권3호
• /
• pp.169-182
• /
• 2012

This study examines the co-evolutionary process between open innovation and firms' absorptive capacity. The effects of open innovation can be maximized through the capacity to absorb the knowledge from the external sources such as universities, government-support research institute, and private R&D centers. This study used data of STEPI technology innovation survey conducted at 2002, 2005, and 2008 (3 points measures). The data were analyzed through a structural equation model. Results suggest that open innovation at t0 point influences positively the absorptive capacity at t1 point, which subsequently enhances the intention of open innovation at t2 point. This result suggests the existence of co-evolutionary process between open innovation and firms' absorptive capacity. When knowledge comes from universities, the co-evolution has sustained; whereas when knowledge comes from private firms' R&D centers, the co-evolution has not effected. Theoretical and practical implications are discussed.

• 설비공학논문집
• /
• 제6권1호
• /
• pp.47-53
• /
• 1994

Cycle simulation of the air-conditioner was carried out using a number of candidate alternatives to R22;R32/R125/R134a(30/10/60, by mass percent), R32/R125/R134a(10/70/20), R32/R134a(25/75), R32/R134a(30/70), R32/R125(60/40), R290(propane) and R134a. In this study, we considered only the basic parts of the air-conditioner such as the compressor, the evaporator, the condenser and the capillary tube, for the purpose of analysis. The performance characteristics of alternatives considered here were examined by comparing with the case using R22 at the constant volumetric flow rate condition. The results of our analysis revealed that the use of refrigerant mixtures, R32/R134a(30/70) and R32/R125/R134a(30/10/60), was appropriate for the alternatives to R22 in view of the cooling capacity and the COP. For the case of using R134a and R290, the COP was observed to increase under the same volumetric flow rate condition, but the cooling capacity was substantially decreased. Therefore the use of R134a and R290 should be accompanied with increasing considerably the size of compressor in order to maintain the same cooling capacity of R22.

• 한국가스학회지
• /
• 제10권1호
• /
• pp.7-12
• /
• 2006

소형저장탱크를 이용한 벌크공급시스템은 LP가스의 공급이 중단되거나 공급량이 부족하지 않도록 LP가스 사용가구의 최대가스소비량을 초과하는 가스량을 발생시켜 공급할 수 있어야 한다. 이때 벌크공급시스템에서 공급할 수 있는 가스량은 소형저장탱크의 가스발생능력이 되며, 소형저장탱크의 선정기준이 된다. 현재 우리나라는 소형저장탱크의 충전량, 연속사용시간 등에 따른 가스발생능력 산정기준이 없어 LP가스 사용가구수에 대하여 적합한 소형저장탱크의 선정이 어려운 상태로서 소형저장탱크의 원활한 보급에 문제가 되고 있다. 본 연구는 소형저장탱크의 선정기준이 되는 가스발생능력을 충전량, 외기온도, 연속사용시간 및 충전조성 등에 따라 산정하여 제시하고자 한다.

• 간호행정학회지
• /
• 제22권1호
• /
• pp.67-79
• /
• 2016

Purpose: To develop strategies for research and development (R&D) in nursing service based on the policy direction of government supported R&D in Korea. Methods: This was a descriptive study to develop strategies for promoting R&D in nursing by analyzing investment trends and status quo, policy directions, and implementation of the details of government supported R&D through government reports, websites of relevant agencies and literature reviews. Results: Few nursing experts participated in clinical research on overcoming major diseases and in R&D for well-being and care. Development of nursing topics that meet the direction of government supported R&D were lacking. Insufficient implementation of nursing service R&D in a timely manner equipped with a performance-based system. Few research studies in R&D projects that included research using big data or contributing to developing medical instruments. Finally, an insufficient number of nursing specialists participated on government R&D advisory committees. Conclusion: For nursing service R&D development efforts should be toward quantitative expansion and qualitative improvements by sensitively recognizing policy direction of government supported R&D. The promotional capacity of nursing service R&D must be reinforced through a multidisciplinary approach and collaborative association with other professionals and the inclusion of nurse specialists on government R&D advisory committees.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2153-2164
• /
• 1998

This paper has presented the parameters for the coexistence between two systems in macro/microcell ovelaid W-CDMA WLL (wideband CDMA wireless local loop) and has calculated the capacity of forward/reverse link in microcell. To produce the capacity for analyzing system interference effects, we have shown tables and graphs with the parameters sucyh as RF channel bandwidth of WLL(W), the transmission rate of service message(R), the required signal power to noise power ratio( $E_{b/}$ $N_{0}$) for achieving accepatable error rate, te user number ( $N_{W1}$, $N_{W2}$) of the neighboring system, the signal power to interference power ratio(.GAMMA.$_{C1B}$, .GAMMA.$_{C2B}$) of the neighboring system, the normalized distance(d) between microcell and macrocell base-station, and microcell to macrocell radius ratio ( $R_{d}$). From the results, we have convinced that the capacity of microcell diminishes as increasing the user number ( $N_{W2}$) in macrocell, increasing the microcell radius, and decreasing the normalized distance(d) between microcell and macrocell base-station. Especially, we have known that when $R_{d}$=0.1, $N_{W2}$ must be below 24 at .GAMMA.$_{C2B}$ = 0 dB and below 8 at .GAMMA.$_{C2B}$ = 4 dB for the acceptable capacity raito to be over 80%. Therfore, this paper is usefult to design microcell W-CDMA WLL for accommodating more user number under the interference effects of macrocell W-CDMA WLL and is expected to be reference in power control if base-station.ation.ion.ation.ation.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.148-157
• /
• 1998

This study presents test results of a residential window air-conditioner using R22 and two potential alternative refrigerants, R407C and R410B. A series of performance tests has been carried out for the basic and liquid-suction heat exchange cycles in a psychometric calorimeter test facility. For R407C, the same rotary compressor was used as in the R22 system. However, compressor for the R410B system was modified to provide the similar cooling capacity. The evaporator circuit was changed to get a counter-cross flow heat exchanger to take advantage of zeotropic mixture's temperature glide, and liquid-suction heat exchange cycle was also considered to improve the system performance. Test results were compared with those for the basic R22 system. The modified system with a liquid-suction heat exchanger increased cooling capacity and energy efficiency by up to 5%.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.192-202
• /
• 2003

The wrinkles correspond to the most obvious expression of skin ageing and are manifested by changes on the organization and dermal structure. In the extracellular matrix, decreased quantities of collagens and glycosaminoglycans as well as a deterioration of the fibrillary network is noted, result in a reduction of dermal thickness. In addition, the activity of the collagenases increases in contrast to the synthesis of collagen fibers. Nor are cells spared during the aging process. We thus studied and compared the contractile capacity as well as the synthesis capacity of normal human fibroblasts and human fibroblasts obtained from biopsies of forehead wrinkles. The capacity of the fibroblasts to be adhered to the collagen network and to maintain a three-dimensional structure of dermis was studied on a model of equivalent dermis. The metabolic activity was studied by evaluating the capacities of synthesis of collagen I, main component of dermis. Human fibroblasts resulting from the forehead wrinkle contract less the gel of collagen than the normal human fibroblasts and present an activity of biosynthesis of collagen I less important than normal human fibroblasts. These results show that fibroblasts with aging present a deceleration of their metabolic activity and lose their capacity of adhesion to collagen fibers thus limiting the possibility of organizing the dermal tissue. We investigated the potential of an active ingredient able to compensate for the reduction of the metabolic activity and to restore the contractile capacity of fibroblasts obtained from forehead wrinkles. This effect was compared with a reference molecule: the vitamin C.

• 한국가스학회지
• /
• 제23권5호
• /
• pp.1-7
• /
• 2019

호흡용 용기에 흠 등의 결함이 발생하였을 때 용기의 잔존강도를 파악하여 파열압력을 판단해야하지만, 복합재료 용기의 경우 흠에 따른 파열 강도의 예측이 어려우며 기법이 복잡하다. 따라서 본 연구에서는 Type-I 용기의 면적용량법 적용 결과를 토대로 Type-III 용기에 결함발생시 파열을 예측하기 위해 면적 용량법 모델을 개발하였으며, 그 신뢰성을 확인하기 위해 용기의 외면에 흠을 가공하여 파열시험을 실시하였다. 면적 용량법 모델의 예측 결과와 실험의 경향이 매우 일치하는 경향을 보였으며, 향후 복합재 용기의 파열압력 추정 방법에 있어 중요한 자료가 될 것으로 기대한다.

• Carbon letters
• /
• 제6권1호
• /
• pp.25-30
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using an activated carbon fiber (ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at a lower potential, the ACF was electrochemically modified in an acidic and a basic solution. Pore structure and functional groups of the electrochemically modified ACF were examined, and the effects of the modification conditions were studied for the adsorption of U(VI). Specific surface area of all the ACFs was decreased by this modification. The amount of the acidic functional groups decreased with a basic modification, while the amount increased a lot with an acidic modification. The electrosorption capacity of U(VI) decreased on the acid modified electrode due to the shielding effect of the acidic functional groups. The base modified electrode enhanced the capacity due to a reduction of the acidic functional groups. The electrosorption amount of U(VI) on the base modified electrode at .0.3 V corresponds to that of the as-received ACF electrode at .0.9 V. Such a good adsorption capacity was due to a reduction of the shielding effect and an increase of the hydroxyl ions in the electric double layer on the ACF surface by the application of negative potential.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.824-829
• /
• 2005

MHR(Metal Hydride Refrigerator) powered by MGT exhaust gas is investigated to find out the optimum conditions corresponding to MGT operating powers. There are many factors to affect cooling capacity of MHR. In this study, the effect of switching time, flow rate of brine on cooling temperature and capacity is investigated. The present results show (1) hydrogen reaction is saturated with 25 min switching time at 25 kW MGT power, (2) cooling power shows maximum phenomenon with increasing switching time, (3) optimum switching times are 20 minutes for 15kW MGT power and 15 minutes for 20, 25kW MGT power, (4) according to increasing brine flow rate, cooling capacity shows decrease at 15 kW MGT power and changes little at above 20 kW MGT power.