• 제목/요약/키워드: Quasi-Periodic

검색결과 142건 처리시간 0.021초

진동하는 원주주위 유동의 직접수치해석 (Direct Numerical Simulation of the Flow Past an Oscillating Circular Cylinder)

  • 강신정;;;남청도;이영호
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2001년도 춘계 학술대회논문집
    • /
    • pp.181-188
    • /
    • 2001
  • The flow past a circular cylinder forced to vibrate transversely is numerically simulated by solving the two-dimensional Wavier-Stokes equations modified by the vibration velocity of a circular cylinder at a Reynolds number of 164. The higher-order finite difference scheme is employed for the spatial discretization along with the second order Adams-Bashforth and the first order backward-Euler time integration. The calculated cylinder vibration frequency is between 0.60 and 1.30 times of the natural vortex-shedding frequency. The calculated oscillation amplitude extends to $25\%$ of the cylinder diameter and in the case of the lock-in region it is $60\%$. It is made clear that the cylinder oscillation has influence on the wake pattern, the time histories of the drag and lift forces, power spectral density and phase diagrams, etc. It is found that these results include both the periodic (lock-in) and the quasi-periodic (non-lock-in) state. The vortex shedding frequency equals the driving frequency in the lock-in region but is independent in the non-lock-in region. The mean drag and the maximum lift coefficient increase with the increase of the forcing amplitude in the lock-in state. The lock-in boundaries are also established from the present direct numerical simulation.

  • PDF

전압제어형 카오스회로의 집적회로 설계 및 구현 (Integrated Circuit Design and Implementation of the Voltage Controlled Chaotic Circuit)

  • 송한정;곽계달
    • 전자공학회논문지C
    • /
    • 제35C권12호
    • /
    • pp.77-84
    • /
    • 1998
  • 0.8㎛ single poly CMOS 공정을 이용하여 집적화 된 전압제어형 카오스 발생회로를 설계, 제작하였다. 제작된 카오스 집적회로는 비선형함수 발생회로와 op-amp, 2상 클럭발생회로, 2개의 샘플&홀드 회로 등으로 이루어진다. 측정결과 ±2.5V 전원, 20kHz의 클럭 인가시 입력제어전압에 따라 주기상태, 준주기 상태, 카오스 상태 등 다양한 형태의 분기현상 및 시계열 파형을 관측할 수 있었다. 또한 이 회로의 직렬, 병렬 연결에 의한 2차원 카오스 패턴도 관측하였다.

  • PDF

운동 중독의 수학적 모델링과 거동 해석 (Mathematical Modelling and Behavior Analysis of Addiction of Physical Exercise)

  • 배영철
    • 한국지능시스템학회논문지
    • /
    • 제24권6호
    • /
    • pp.615-621
    • /
    • 2014
  • 중독 문제가 사회문제가 되고 있으며 이를 해결하고자하는 사회적 노력이 계속되고 있다. 이러한 노력 중의 하나로 중독에 대한 수학적 모델링과 이 모델링을 이용하여 거동해석을 수행하며 이 결과를 가지고 중독이전과 중독이후의 상태를 판정하는 연구를 중독 이전의 상태에서 중독 상태로 진행하는 단계의 관찰을 통한 연구를 진행하는 것이 필요하다. 이러한 필요성에 따라 본 연구에서는 운동에 대한 중독 방정식을 전개하기 위하여 Spring-Damper-Mass 시스템과 등가적으로 구성할 수 있는 새로운 2차계로 구성한 운동에 대한 운동 중독 방정식 모델을 제안하고 이 중독 방정식에서의 거동을 분석한다.

시간지연을 갖는 로미오와 줄리엣의 사랑모델에서의 거동해석 (Behavior Analysis in Love Model of Romeo and Juliet with Time Delay)

  • 황림운;배영철
    • 한국지능시스템학회논문지
    • /
    • 제25권2호
    • /
    • pp.155-160
    • /
    • 2015
  • 사람은 감정을 가진 동물이라고 말한다. 사람의 감정은 다양한 종류가 있으며 그 중 하나인 사랑은 사회학과 심리학에서 주된 관심사로 연구되어 왔다. 본 논문에서는 로미오와 줄리엣의 사랑 방정식에서 시간 지연 요소를 사랑에 대한 반응시간으로 가정하여 반영하였다. 줄리엣에만 시간지연이 있는 경우, 로미오에만 시간지연이 있는 경우, 로미오와 줄리엣 모두에 시간지연이 있는 경우를 고려하여 이들의 거동을 시계열과 위상 공간으로 나타내고 이들 사이의 차이를 분석하였다.

Ti:PPLN 광도파로를 이용한 비선형광학 기반의 의사 위상정합 2차 조화파 발생 (Quasi Phase-Matched Second Harmonic-Wave Generation based on Nonlinear-Optic Effect Utilizing Ti:PPLN Optical Waveguides)

  • 정홍식;정영식
    • 한국광학회지
    • /
    • 제19권6호
    • /
    • pp.408-415
    • /
    • 2008
  • 고전압 펄스를 인가시켜서 주기적으로 도메인을 반전시키는 공정을 검토하였으며, 이를 적용해서 제작된 Ti 확산 리튬나오베이트 채널광도파로(Ti:PPLN) 기반의 의사 위상정합 2차 조화파 발생을 체계적으로 측정하였다. 2차 조화파 발생을 위해서 $16.6{\mu}m$ 분극 주기와 49 mm 길이의 Ti:PPLN 채널광도파로를 제작하였으며, 473(%/W) 변환효율이 측정되었다.

소형 재생 가스터빈의 동적 작동특성 해석 (Analysis of the Dynamic Characteristics of a Small Regenerative Gas Turbine)

  • 김재환;전용준;김동섭;노승탁
    • 대한기계학회논문집B
    • /
    • 제23권6호
    • /
    • pp.769-777
    • /
    • 1999
  • This paper presents models for the dynamic simulation of a regenerative gas turbine and describes dynamic behaviors of a small regenerative engine. A quasi-steady model is introduced where the inertia of the working fluid is assumed to be negligible compared with the mechanical inertia of the rotating shaft. Based on this quasi-steady model, the transient model for the heat exchanger is employed to simulate the unsteady heat exchange in the recuperator. The effect of the thermal inertia of the recuperator metal on transient behaviors is analyzed by comparing the predicted results of the transient and steady state heat exchanger models. For several load change modes such as sudden increase, decrease and periodic variation, engine dynamic characteristics are investigated by applying a fuel control logic for the constant shaft speed. It is found that the thermal inertia of the recuperator metal has a dominant effect on the whole engine dynamic behavior.

유사 주기성을 이용한 PFS 펄스 신호의 동잡음 제거 (Removing the Motion Artifacts in the Pulse Signal Detected from the PFS Using the Quasi-periodicity)

  • 이한욱;전중창;정원근
    • 한국정보전자통신기술학회논문지
    • /
    • 제9권6호
    • /
    • pp.591-598
    • /
    • 2016
  • 모바일 헬스케어 환경에서는 정확한 생체 정보를 실시간으로 측정하는 것과 함께, 저전력의 장치를 설계하는 것이 무엇보다 중요한 관건이다. 본 논문에서는 저전력 특성을 갖는 피에조 필름 센서(PFS)를 이용하여 손목의 요골 동맥으로부터 심장의 동기 신호인 맥파를 측정하는 방법을 제안하였다. 생체 신호처리에 있어서 문제점은 동잡음의 존재이다. 본 연구에서는 맥파 신호의 동잡음을 제거하기 위해서 일반적으로 적용되는 참조신호를 이용한 적응 필터링 외에 펄스 신호의 유사 주기성을 이용한 주기 이동 평균 필터 방법을 추가로 적용하였다. 시물레이션 및 실험 결과 PFS 신호에 유사 주기성을 이용함으로써 적응 필터 이후에도 존재하는 동잡음을 완벽히 제거할 수 있음을 확인 하였다.

Taylor Vortex의 구조에 대한 연구 (On the Structures of Taylor Vortices.)

  • 황종연;양경수
    • 대한기계학회논문집B
    • /
    • 제27권8호
    • /
    • pp.1081-1088
    • /
    • 2003
  • Numerical investigation on the structures of various Taylor vortices induced in the flow between two concentric cylinders, with the inner one rotating and with a pressure-driven axial flow imposed, is carried out, and compared with the experiments of Wereley and Lueptow [Phys. fluid, 11(12), 1999] who studied the Taylor vortices using PIV in detail. Especially, the properties of helical vortices and random wavy vortices are discussed, and their three-dimensional structures are visualized using the numerical data. Our simulation also predicts that random wavy vortices have quasi-periodic movement which can be explained by traveling waves formed in the azimuthal direction. The numerical results are well consistent with the experimental findings of Wereley and Lueptow.

종동력을 받는 이중진자의 혼돈운동 연구 (Chaotic Behavior of a Double Pendulum Subjected to Follower Force)

  • 장안배;이재영
    • 소음진동
    • /
    • 제7권3호
    • /
    • pp.439-447
    • /
    • 1997
  • In this study, the dynamic instabilities of a nonlinear elastic system subjected to follower forces are investigated. The two-degree-of-freedom double pendulum model with nonlinear geometry, cubic spring, and linear viscous damping is used for the study. The constant, the initial impact forces acting at the end of the model are considered. The chaotic nature of the system is identified using the standard methods, such as time histories, power density spectrum, and Poincare maps. The responses are chaotic and unpredictable due to the sensitivity to initial conditions. The sensitivities to parameters, such as geometric initial imperfections, magnitude of follower force, direction control constant, and viscous damping, etc., are analysed. Dynamic buckling loads are computed for various parameters, where the loads are changed drastically for the small change of parameters.

  • PDF

Mesoscopic study on historic masonry

  • Sejnoha, J.;Sejnoha, M.;Zeman, J.;Sykora, J.;Vorel, J.
    • Structural Engineering and Mechanics
    • /
    • 제30권1호
    • /
    • pp.99-117
    • /
    • 2008
  • This paper presents a comprehensive approach to the evaluation of macroscopic material parameters for natural stone and quarry masonry. To that end, a reliable non-linear material model on a meso-scale is developed to cover the random arrangement of stone blocks and quasi-brittle behaviour of both basic components, as well as the impaired cohesion and tensile strength on the interface between the blocks and mortar joints. The paper thus interrelates the following three problems: (i) definition of a suitable periodic unit cell (PUC) representing a particular masonry structure; (ii) derivation of material parameters of individual constituents either experimentally or running a mixed numerical-experimental problem; (iii) assessment of the macroscopic material parameters including the tensile and compressive strengths and fracture energy.