• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.48-49
• /
• 2014

Green Frame is a column-beam system that uses composite precast concrete members. Previous studies have proven this system to be not only structurally safe, constructible, and economically feasible, but also environmentally-friendly. If the computerized program is used to estimate the quantity, the result of it shall be calculated much easily, quickly and exactly than manual estimation, because precast concrete members of Green Frame has standard size and connection method between it. Therefore, this study suggest quantity survey concept for column-beam structure comprised of composite precast concrete members. Hereafter, the quantity survey of Green Frame shall be much quickly and accurate, if the system would be made based on the result of this study.

• 한국정보처리학회논문지
• /
• 제2권2호
• /
• pp.137-147
• /
• 1995

건설공사에서는 설계 및 시공이 엄격히 구분되어 있다. 따라서 시공에 필요한 물 량을 산출하기 위해서는 설계화일을 물량산출에 직접 사용하지 못하고 수작업에 의존 하고 있다. 이러한 이유는 설계 및 시공시스템의 기능사이에 서로의 연계성이 적기 때문이다. 본 연구에서는 공사설계의 치수 및 물량데이타를 이용하여 물량산출을 자동 화 할 수 있는 데이터베이스 모델을 구성하고 분석하였다. 즉, 설계시 CAD 시스템의 설계라이브러리에 저장되어 있는 구조설계화일과 물량산출자료의 연계성을 분석하여 공사물량을 효율적으로 산출할 수 있는 시스템을 구축하고, 이의 성능을 평가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.193-194
• /
• 2014

Green Frame is a building frame system composed of precast concrete columns and beams. For the construction to run smoothly, the quantity of frames should be estimated in the planning phase and a plan on production of members should be established in connection with the overall work plan. The algorithm for calculation of the amount of forms used in Green Frame automatically estimates the quantity of forms using the design structure prepared in the design phase. The number and area of forms are calculated using the member size drawn from the structure design. Based on the quantity calculated, the type and area per form size are estimated to be used in preparing BOQ (Bill of Quantity). Thus, the time required for architectural planning and design can be shortened when the algorithm for calculation of the amount of forms is applied. This study is on the basic research of calculating the quantity of forms using the structure design and of the algorithm for calculation of the amount of forms used for production of composite PC members.

• 한국방재학회 논문집
• /
• 제8권1호
• /
• pp.125-131
• /
• 2008

항만공사시 태풍 및 해일로 인한 많은 방파제 피해가 발생하고 있다. 이러한 피해를 감안하여 일부 시공사들은 해상공사보험에 가입하고 있는 실정이다. 하지만 정작 피해가 발생하였을 경우 방파제에 대한 피해현황을 파악하기란 쉽지 않다. 본 연구에서는 다수의 음파를 발생시키는 멀티빔 음향측심의를 사용하여 방파제의 피해조사를 통해 정량적이고 효과적으로 피해물량을 산정할 수 있었다.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.567-574
• /
• 2011

The purpose of this paper is to identify factors that influence knowledge sharing and determine the attitudes of quantity surveyors towards knowledge sharing based on the factors. The analysis was based on an online questionnaire survey of Registered Quantity Surveyors from Selangor and Kuala Lumpur. Individualism and collectivism were identified as two major factors that influence attitude towards knowledge sharing. Indicators of individualism include individual attitude, competitiveness, care, incentives and rewards; while the indicators of collectivism are trust, social behaviors and motivation. The findings show that the level of attitudes towards knowledge sharing among quantity surveyors is generally high under enabling organizational environment. However, this is a cautious conclusion as the valid sample on which the analysis is based is relatively small. Willingness to share was found to be highest when incentives and rewards are involved as well as when there is a knowledge management system to promote continuous learning and sharing of knowledge.

• 대한인간공학회지
• /
• 제3권1호
• /
• pp.3-11
• /
• 1984

This study aims to investigate the effects of the size of operator's hand and the use of foot on the production quantity and product quality. To find out the facts the survey is conducted by measuring the hand size for the worker who is randomly chosen and by grouping them into the large hand size group and small hand size group on the base of the measuring data. The grouped operators are assigned to their job as usual, and their daily production quantities and qualities are measured. The survey shows that the production quantity of the small hand group are higher than the large hand group, and the number of defects of the small hand group are less than the large hand group.

• 수산해양교육연구
• /
• 제26권3호
• /
• pp.578-586
• /
• 2014

The seasonal appearance and distribution of finless porpoise (Neophocaena asiaeorientalis) was investigated with sighting survey method around Wido in West sea, Korea. Fishing survey with drag net was also conducted to investigate the species composition of inhabitants and the consignment quantity data of fisheries cooperation was collected to confirm the seasonal change of the composition and quantity of them. Finless porpoise didn't emerged around Wido in winter season, but the number of appearance in summer season amounted to 1~15 indv. for 15 observing points and the appearance frequency became lower in open sea than in inshore. There was also significant relationship between the appearances of finless porpoise (Neophocaena asiaeorientalis) and that of inhabitants. we consequently concluded that finless porpoise typically distributes from April to september, and moves to another area for wintering and food consumption from October to March.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.279-290
• /
• 2004

Sludge quantity has increased at "A"water treatment plant due to deterioration of raw water quality and GAC installation. Increased sludge resulted in overloading on sludge handling facilities. The object of this study is to survey sludge quantity and capacity of sludge handling facilities at "A"water treatment plant. Measured quantity of sedimentation sludge considerably exceeded the design capacity of sludge holding basin. Sludge holding basin was properly designed, but low concentration of sludge discharged from sedimentation basin caused production of large volume of the sludge. Timer operated control system for sludge withdrawal unit and leakage through a control valve were suspected to cause the low concentration. Augmentation of the control system by a turbidity meter and addition of a new control valve successfully reduced the sludge volume enough to satisfy the design capacity of sludge holding basin. Unlike sedimentation sludge, measured quantity of washwater was considerably less than the design capacity of washwater basin because it was over-designed.

• 대한지역사회영양학회지
• /
• 제12권2호
• /
• pp.198-205
• /
• 2007

This study was conducted to investigate the validity of using a cameraphone for a dietary intake survey method. The subjects were 28 female college students. After eating a standard lunch meal which consisted of plain rice, seaweed soup, bulgogi, cucumber salad, roasted anchovy and kimchi, the quantity of dietary intake, calorie intake & nutrients intake were analyzed by weighed method, diet record method and cameraphone method by dietitian with k without cameraphone analysis training. There were no significant differences in the quantity of 6 foods intake between weighted method and cameraphone method by dietitians with camera phone analysis training. However, the quantity of seaweed soup, bulgogi & cucumber salad intake analyzed by diet record method was significantly lower than the weighed method. And the quantity of seaweed soup, bulgogi, cucumber salad, roasted anchovy and kimchi intake analyzed by the cameraphone method by dietitians without cameraphone analysis training was significantly lower than the weighed method. There were no significant differences in the calorie intake and nutrients intake between the weighted method and camera phone method by dietitians with camera-phone analysis training. However, protein, calcium, iron, phosphorous, Vitamin A, Vitamin $B_2$, Vitamin E and cholesterol intake analyzed by diet record method was significantly lower than the weighed method. And fat and Vitamin $B_2$ intake analyzed by the camera phone method by dietitians without cameraphone analysis training was significantly lower than the weighed method. Therefore, this study suggests that the use of the camerephone may be a valid and convenient method fur evaluating a dietary intake survey. However, systematic and standard education is necessary about the size and volume of dishes and angle of photo for more accurate results.

• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.