• The Korean Journal of Food And Nutrition
• /
• v.35 no.6
• /
• pp.543-551
• /
• 2022

There has been increased interest in lignans due to their potential effect in reducing the risk of developing several diseases. To evaluate lignan contents, sensitive and accurate methods should be developed for their quantification in food. The present study aimed to validate a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the quantification of 5 lignans: lariciresinol (Lar), matairesinol (Mat), pinoresinol (Pin), secoisolariciresinol (Seco), and syringaresinol (Syr). The validation included selectivity, linearity, recovery, accuracy, and precision. The method was proved to be specific, with a linear response (R²≥0.99). The limits of detection were 0.040~0.765 ㎍/100 g and the limits of quantification were 0.114~1.532 ㎍/100 g. Recoveries were 90.588~109.053% for black sesame powder. Relative standard deviations of repeatability and reproducibility were below 5%. Total lignan contents of roasted coffee bean, oat, and blacksoy bean were 105.702 ㎍/100 g, 78.965 ㎍/100 g, and 165.521 ㎍/100 g, respectively. These results showed that LC-MS/MS analysis would be effective in producing acceptable sensitivity, accuracy, and precision in five lignan analyses.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.401-409
• /
• 2023

Oscillating water column (OWC) type wave power generator system is a power generation system that uses wave energy, a sustainable and renewable energy source. Irregular cycles and wave heights act as factors that make it difficult to secure generation efficiency of the wave power generator system. Recently, research for improving power generation efficiency is being conducted by applying digital twin technology to OWC type wave energy converter system. However, digital twin using sensor data can predict erroneous performance due to uncertainty in the sensor data. Therefore, this study proposes an uncertainty analysis method for sensor data which is used in digital twin to secure the reliability of digital twin prediction results. Uncertainty quantification considering sensor data characteristics and future uncertainty information according to uncertainty propagation were derived mathematically, and confidence interval estimation was performed based on the proposed method.

• Journal of Environmental Impact Assessment
• /
• v.2 no.2
• /
• pp.59-71
• /
• 1993

Evaluation methods are employed in environmental impact assessment to choose between different project site, to determine the required measures to compensate impact and to decide whether the environmental impacts are more important than the social or economic effects of a project. The main obstacles that restrict use of quantitative evaluation method are a Lack of knowledge about the environmental effects (e.g. if impacts on wildlife or landscape amenities are predicted) and the relative importance of economic and social issues compared with nature conservation stability of ecosystem or landscape beauty. In Germany, the most common method for site planning is the "ecological risk analysis". It is a kind of multi-criteria-decision-method based on quantitative and qualitative description and ordinal ranking. The various kinds of "ecological balancing methods" that are more recently developed (within the last decade) to quantify the required amount for compensatory measures instead often use cardinal figures to express the value of ecosystems, the intensity of impacts, the need for additional measures to compensate for long recuperative periods when restoring ecosystems and so on. There are still only a view attempts to quantify decisions between environmental and socio-economic issues. Multicriteria-analysis as well as cost-benifit-analysis was used. Some new approaches which are still in a preliminary status are based on contingent valuation and on calculations for compensatory payments (instead of compensatory measures).

• Structural Engineering and Mechanics
• /
• v.25 no.3
• /
• pp.311-330
• /
• 2007

Model-based predictions of structural behavior are negatively affected by uncertainties of various type and in various stages of the structural analysis. The present paper focusses on dynamic analysis and addresses the effects of uncertainties concerning material and geometric parameters, mainly in the context of modal analysis of large-scale structures. Given the large number of uncertain parameters arising in this case, highly scalable simulation-based methods are adopted, which can deal with possibly thousands of uncertain parameters. In order to solve the reliability problem, i.e., the estimation of very small exceedance probabilities, an advanced simulation method called Line Sampling is used. In combination with an efficient algorithm for the estimation of the most important uncertain parameters, the method provides good estimates of the failure probability and enables one to quantify the error in the estimate. Another aspect here considered is the uncertainty quantification for closely-spaced eigenfrequencies. The solution here adopted represents each eigenfrequency as a weighted superposition of the full set of eigenfrequencies. In a case study performed with the FE model of a satellite it is shown that the effects of uncertain parameters can be very different in magnitude, depending on the considered response quantity. In particular, the uncertainty in the quantities of interest (eigenfrequencies) turns out to be mainly caused by very few of the uncertain parameters, which results in sharp estimates of the failure probabilities at low computational cost.

• The Korean Journal of Applied Statistics
• /
• v.29 no.2
• /
• pp.381-388
• /
• 2016

It is common to quantify the concept of interest in the social and human sciences to test a research hypothesis. In such a case, it is strongly recommended to investigate if the procedure is appropriately designed and implemented according the research purpose since the quantification procedure highly affects the result of statistical analysis. In this work, we propose a visualization tool which enables us to check the construct validity of a measurement tool (such a questionnaire) in a concise and convenient way based on a penalized factor analysis model. We illustrate our method with numerical simulation and real data analysis.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.715-731
• /
• 2021

Uncertainties are calculated for pressurized water reactor (PWR) spent nuclear fuel (SNF) characteristics. The deterministic code STREAM is currently being used as an SNF analysis tool to obtain isotopic inventory, radioactivity, decay heat, neutron and gamma source strengths. The SNF analysis capability of STREAM was recently validated. However, the uncertainty analysis is yet to be conducted. To estimate the uncertainty due to nuclear data, STREAM is used to perturb nuclear cross section (XS) and resonance integral (RI) libraries produced by NJOY99. The perturbation of XS and RI involves the stochastic sampling of ENDF/B-VII.1 covariance data. To estimate the uncertainty due to modeling parameters (fuel design and irradiation history), surrogate models are built based on polynomial chaos expansion (PCE) and variance-based sensitivity indices (i.e., Sobol' indices) are employed to perform global sensitivity analysis (GSA). The calculation results indicate that uncertainty of SNF due to modeling parameters are also very important and as a result can contribute significantly to the difference of uncertainties due to nuclear data and modeling parameters. In addition, the surrogate model offers a computationally efficient approach with significantly reduced computation time, to accurately evaluate uncertainties of SNF integral characteristics.

• Korean Journal of Pharmacognosy
• /
• v.50 no.1
• /
• pp.59-64
• /
• 2019

Cudrania tricuspidata Bureau (Moraceae) has been used for physical weakness, impotence and insomnia in traditional Korean medicine. In this study, cudratricusxanthone A and cudraxanthone D were isolated from roots of C. tricuspidata and quantification were achieved by using high performance liquid chromatography (HPLC) method with diode array detector. The isolated compound was identified by NMR analysis and HPLC method was validated by linearity, precision and specificity test. The results showed that calibration curves of two compounds indicated great linearity with a correlation coefficient ($R^2$) of 0.9976 and 0.9995. The limits of detection (LOD) for cudratricusxanthone A and cudraxanthone D were 1.15, $0.11{\mu}g/ml$. Intra-day precision of cudratricusxanthone A and cudraxanthone D were 0.32~1.99%, 0.09~3.32% and inter-day precision were 0.59~2.40%, 0.28~1.55% RSD (%) values, respectively. The specificity was confirmed by chromatograph and quantitative contents of cudratricusxanthone A and cudraxanthone D were $0.46{\pm}0.02%$ and $1.53{\pm}0.06%$. Therefore, this study can be used as a basic research data for the quantitative analysis of derived compounds from roots of C. tricuspidata.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.5
• /
• pp.29-37
• /
• 2018

Biodiversity refers to the diversity of organisms originating from all sources, including terrestrial ecosystems, aquatic ecosystems, and complex ecosystems and it is considered to be the standard of the area to be preserved and protected. So The Importance of environmental assessment for biodiversity conservation is increasing and International efforts to quantify biodiversity and to develop indices have been made, but there are insufficient researches on the use of biomass databases and their quantification in Korea. In this study, the biodiversity map was constructed using the 3rd National Ecosystem Survey Mammal Data with three spatial units(Administrative Area, 1:5,000 index map, hexagonal lattice). and the difference of map constructed by spatial unit was suggested to help research on quantification and evaluation of biodiversity in the future. As a result of the study, biodiversity index for the same area varied according to the spatial unit and overall average and standard deviation were different too. Therefore it is necessary to utilize appropriate spatial unit considering the suitability and purpose of quantification rather than using specific unit. It also showed the necessity of establishing a standard for biodiversity index as a result of comparative analysis with ecosystem and nature map. Based on this research, comprehensive efforts should be made for the sustainable development of the country through further research and institutional improvement for quantification and evaluation of biodiversity, set standards.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.327-330
• /
• 2007

This paper verifies that the normality assumption that the simulation output data, Project Completion Times (PCTs), follow normal distribution is not always acceptable and the existing belief may lead to misleading results. A risk quantification method, which measures the effect caused by the assumption, relative to the probability distribution of PCTs is implemented as an algorithm in MATLAB. To validate the reliability of the quantification, several series of simulation experiments have been carried out to analyze a set of simulation output data which are obtained from different type of Probability Distribution Function (PDF) assigned to activities'duration in a network. The method facilitates to find the effect of PDF type and its parameters. The procedure necessary for performing the risk quantification method is described in detail along with the findings. This paper contributes to improving the reliability of simulation based scheduling method, as well as increasing the accuracy of analysis results.

• The Plant Pathology Journal
• /
• v.38 no.3
• /
• pp.229-238
• /
• 2022

Fusarium wilt caused by Fusarium oxysporum f. sp. niveum (Fon) is the most serious soil-borne disease in the world and has become the main limiting factor of watermelon production. Reliable and quick detection and quantification of Fon are essential in the early stages of infection for control of watermelon Fusarium wilt. Traditional detection and identification tests are laborious and cannot efficiently quantify Fon isolates. In this work, a real-time polymerase chain reaction (PCR) assay has been described to accurately identify and quantify Fon in watermelon plants and soil. The FONRT-18 specific primer set which was designed based on identified specific sequence amplified a specific 172 bp band from Fon and no amplification from the other formae speciales of Fusarium oxysporum tested. The detection limits with primers were 1.26 pg/µl genomic DNA of Fon, 0.2 pg/ng total plant DNA in inoculated plant, and 50 conidia/g soil. The PCR assay could also evaluate the relationships between the disease index and Fon DNA quantity in watermelon plants and soil. The assay was further used to estimate the Fon content in soil after disinfection with CaCN₂. The real-time PCR method is rapid, accurate and reliable for monitoring and quantification analysis of Fon in watermelon plants and soil. It can be applied to the study of disease diagnosis, plant-pathogen interactions, and effective management.