• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.04a
• /
• pp.7-12
• /
• 1992

The aim of this study is to develop economical High-Strength and High-Quality Concrete, and to assure quality control of Concrete in the field. For this purpose, Five types of Mixing Methods are examined and the relationship between slump loss and slump recovery by transport is studied. As a result, workability and strength are dependent on the Mixing Method, although the Mixing proportions are same, Also, adding admixture in the field is proposed as an alternative to consider the relationship between slump loss and slump recovery.

• Electronics and Telecommunications Trends
• /
• v.8 no.4
• /
• pp.130-142
• /
• 1993

본 고에서는 통신의 고속화와 다양한 사용자의 요구사항으로 인하여 트랜스포트 계층에서 현재 발생하고 있는 서비스의 정의와 QoS(Quality of Service) 에 대하여 알아보았다. 그리고 이를 토대로 하여 계속 발전하고 있는 하위계층의 요구 사항과 매우 다양해져 가는 상위계층의 요구 사항을 적극 수용할 수 있는 새로운 서비스와 QoS 를 정의하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.349-357
• /
• 2011

This study has an objective to estimate effect on water-quality enhancement by removal of contaminated river-bed material using a two-dimensional numerical modeling in the Seonakdong River, the Pyunggang River and the Maekdo River. RMA2 and RMA4 models were used for flow and contaminant transport simulation, respectively. After the analysis of the effects of flow restoration plan for the Seonakdong River system made by Lee et al (2008), simulation have been performed about scenarios which contains operations of the Daejeo Gate, the Noksan Gate, the Makdo Gate (on planning), and the Noksan Pumping Station. Because there is no option for elution from bed sediment in the RMA4 model, a simple technique has been used for initial condition modification for elution. The analyses revealed that the effect on water quality improvement due to dredging of bed sediment seemed to be less than 10 % of the total effect. The most efficient measure for the water quality improvement of the river system was the linked operation of water-gates and pumping station.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.109-114
• /
• 2021

The characteristics of vibrational stress (shock and vibration) during transport and the possibility of damage to the packaged pears by functional PLA tray were investigated. And this study was conducted to analyze how environmental conditions by simulated transport environment affect quality factors such as weight loss (%) and soluble solid content (SSC, %), and firmness (bioyield strength, kPa) of packaged pears by PLA tray and Expanded PET foam pad (Group 1), EPE cushion cup pad and net (Group 2) for exporting. Pears with or without vibration stress were stored for 30 days at low temperatures (5 ± 0.8℃, 80 ± 5% relative humidity). There was the statistically significant difference (p ≤ 0.05) between pears with and without vibration stress for weight loss, soluble solid content, and firmness (bioyield strength) after 30 days storage. Vibration stress accelerated pear quality deterioration during storage, resulting in increased weight loss, soluble solids content, and reduced hardness. The firmness (bioyield strength) and weight changes of pears with PLA trays were smaller than those of conventional packaging box systems. It was determined that the firmness of agricultural products was a quality factor closely related to the storage period and that PLA could be applied.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.495-507
• /
• 2021

With the recent industrial development, accidental pollution in riverine environments has frequently occurred. It is thus necessary to simulate pollutant transport and dispersion using water quality models for predicting pollutant residence times. In this study, we conducted a field experiment in a meandering reach of the Sum River, South Korea, to validate the field applicability and prediction accuracy of RAMS+ (River Analysis and Modeling System+), which is a two-dimensional (2D) stream flow/water quality analysis program. As a result of the simulation, the flow analysis model HDM-2Di and the water quality analysis model CTM-2D-TX accurately simulated the 2D flow characteristics, and transport and mixing behaviors of the pollutant tracer, respectively. In particular, CTM-2D-TX adequately reproduced the elongation of the pollutant cloud, caused by the storage effect associated with local low-velocity zones. Furthermore, the transport model effectively simulated the secondary flow-driven lateral mixing at the meander bend via 2D dispersion coefficients. We calculated the residence time for the critical concentration, and it was elucidated that the calculated residence times are spatially heterogeneous, even in the channel-width direction. The findings of this study suggest that the 2D water quality model could be the accidental pollution analysis tool more efficient and accurate than one-dimensional models, which cannot produce the 2D information such as the 2D residence time distribution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.211-217
• /
• 1999

Data on ambient levels of $SO_2$, $NO_x$, and their emissions in Northeast Asia with special emphasis on China are collected and discussed. Also, study results on long-range transport of air pollutants in the region were briefly discussed. It was found that emissions of air pollutants in China are dominant over the region.

• Spatial Information Research
• /
• v.4 no.2
• /
• pp.147-157
• /
• 1996

A rural water quality management information system(RWQMIS) by integrating Geo¬graphic Information System(GIS) with the existing models (pollutants transport and river water quality) is described. A simple pollutant load model to calculate delivered pollutants to stream, Tank model to generate daily runoff and QUAL2E model to predict river water quality, were incorporated into GIS. The system was applied to $80km^2$ watershed in Icheon Gun and Yongin Gun, Kyonggi Do. The spatial distributions of produced pollutant load, discharged pollutant load, delivered ratio to the stream, and the river water quality status for given sites were successfully generated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.33-34
• /
• 2022

The Apartment Defect Dispute Mediation Committee of the Ministry of Land, Infrastructure, and Transport received as many as 7,686 complaints regarding defects in 2021, and the conflict caused by these disputes on the defects is worsening. A quality inspection team system was established in January 2021 to address the deepening conflict, and this system prevented the emergence of defects in apartment houses before the residents moved in. Quality inspections were conducted based on the Housing Act standards, but the reality is that the standards for the ordinances are not systematic. Based on the analysis of the ordinances by the apartment quality inspection team, 23 out of 226 local governments utilized the quality inspection teams, and they had different standards for the quality inspection subjects and inspection periods. In addition, the inspection standards for the defect checklists used by the apartment quality inspection teams operated by local governments varied. A survey was conducted by apartment quality experts to tackle this problem and proposed improvement plans for the defect checklists used for the quality inspection of apartment houses.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1327-1337
• /
• 2018

Aviation fuel oil is more strictly controlled than other transport fuels because it can lead to major accidents in the event of a problem. The quality standards of the aircraft are specified by the domestic Korean Standard, the American Society for Testing and Materials and the International Air Transport Association, respectively. From 2016 to 2017, the quality analysis of 6 items such as aromatic content, sulfur content and distillation characteristics was carried out on the jet fuel produced at five domestic refineries. Domestic production of jet fuel has been shown to be in conformity with the quality standards and has been maintained at a constant level throughout the year. Compared with the specification of ASTM and IATA the aromatic content of domestic KS specification is set to be strictly 1.5 wt% higher than the ASTM and IATA setting specification, but it satisfies this specification sufficiently. In addition, other items such as sulfur content, distillation property and flash point satisfied both domestic and international specification.