• Journal of Korean Academy of Dental Administration
• /
• v.5 no.1
• /
• pp.22-30
• /
• 2017

Objective: The purpose is to study the factors to impact on the satisfaction of field practice among dental hygiene students and to provide the basic data for the quality improvement of the field practices for dental hygiene students. Methods: A self-reported questionnaires were filled out by 108 dental hygiene students in C city. Questionnaires were composed with the general characteristics, satisfaction to major, and satisfaction to field clinical practice. The data was analyzed by chi-square statistics using SPSS 20.0 program. Results: The higher satisfaction to communication with professor or seniors in department was associated with the higher satisfaction to field clinical practice (p<0.05). The higher satisfaction to field clinical practice hours per week was associated with the higher satisfaction to field clinical practice (p<0.05). The higher interest to major subjects and the satisfaction to the laboratory environment were associated with the higher satisfaction to field clinical practice (p<0.05). Conclusions: The higher satisfaction to major was associated with the higher satisfaction to field clinical practice. Therefore, the systematic curriculum development is needed to improve the satisfaction with major and clinical practice.

• Korean Journal of Ecology and Environment
• /
• v.42 no.2
• /
• pp.200-211
• /
• 2009

A mathematical modeling program called Soil and Water Assessment Tool (SWAT) developed by USDA was applied to Kyongan stream watershed. It was run under BASINS (Better Assessment Science for Integrating point and Non-point Sources) program, and the model was calibrated and validated using KTMDL monitoring data of 2004${\sim}$2008. The model efficiency of flow ranged from very good to fair in comparison between simulated and observed data and it was good in the water quality parameters like flow range. The model reliability and performance were within the expectation considering complexity of the watershed and pollutant sources. The results of pollutant loads estimation as yearly (2004${\sim}$2008), pollutant loadings from 2006 were higher than rest of year caused by high precipitation and flow. Average non-point source (NPS) pollution rates were 30.4%, 45.3%, 28.1% for SS, TN and TP respectably. The NPS pollutant loading for SS, TN and TP during the monsoon rainy season (June to September) was about 61.8${\sim}$88.7% of total NPS pollutant loading, and flow volume was also in a similar range. SS concentration depended on precipitation and pollution loading patterns, but TN and TP concentration was not necessarily high during the rainy season, and showed a decreasing trend with increasing water flow. SWAT based on BASINS was applied to the Kyongan stream watershed successfully without difficulty, and it was found that the model could be used conveniently to assess watershed characteristics and to estimate pollutant loading including point and non-point sources in watershed scale.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.367-372
• /
• 2024

It was intended to explore the relationship between motivation for participation in hair education, program satisfaction, and lifelong learning happiness index for adult learners at the Lifelong Education Center, and to provide basic data for revitalizing lifelong education programs. Today, universities have conditions as a comprehensive educational institution with practicality that can meet various and high-quality lifelong educational needs. The university-affiliated Lifelong Education Center plays a role in ensuring the right to learn for all citizens as well as fulfilling the social service function and greatly expanding educational opportunities, which is one of the essential functions of universities, by making good use of the excellent transfer material resources of universities. Adults should now seek professional self-identity through retraining, and respond flexibly to various social situations such as increasing roles, expanding responsibility, and uncertainty in the job and employment structure toward professional socialization in the professional world The subject of the study was to collect data by distributing 90 questionnaires to adult learner hair education subjects in G area, and 85 copies were finally used for SPSS 26.0 for Windows analysis, excluding questionnaires with insufficient responses. The survey period was from November 1 to December 27, 2023. First, it was found that adult learners' motivation to participate in hair education has an effect on the lifelong learning happiness index. Second, it was found that adult learners' satisfaction with the program of hair care workers has an effect on the lifelong learning happiness index. Through this study, it is judged that it is necessary to understand what can maximize the high lifelong learning happiness index, and to meet the learning needs of modern people living in the age of 100, increase their potential, help them design a second life, contribute to self-realization and society, and help them have steady, self-directed lifelong learning opportunities.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.974-984
• /
• 2007

The purpose of this study was to find differences in evaluation criteria and to find differences in preferred images based on benefits segmented groups of jeans products consumers. Male and female Korean university students participated in the study. Quota sampling method was used to collect the data based on gender and a residential area of the respondents. Data from 492 questionnaires were used in the analysis. Factor analysis, Cronbach's alpha coefficient, cluster analysis, one-way ANOVA, and post-hoc test were conducted. As a result, respondents who seek multi-benefits considered aesthetic criteria(e.g., color, style, design, fit) and quality performance criteria(e.g., durability, ease of care, contractibility, flexibility) more importantly when evaluating and purchasing jeans products. Respondents who seek brand name considered extrinsic criteria(e.g., brand reputation, status symbol, country of origin, fashionability) more importantly than respondents who seek economic efciency. Respondents who seek multi-benefits such as attractiveness, fashion, individuality, and utility tend to prefer all the images: individual image, active image, sexual image, sophisticated image, and simple image when wearing jeans products. Respondents who seek fashion are likely to prefer individual image, and respondents who seek brand name more prefer both individual image and polished image. Mean while, respondents who seek economical efficiency less prefer sexual image and polished image.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.271-276
• /
• 2006

This study set out to analyze the relationships between the senior citizens' dental health activities and dental health conditions, to provide basic data to develop a program for their better dental health, and finally to search for the ways to improve their life quality through dental health care. The subjects were 142 senior citizens(58 were male and 84 were female) who were 65 years old or older and visited a dental hospital or clinic in the Seoul metropolitan area from April 17 to April 28, 2006. With the cooperation from the dentists, the investigators examined their dental conditions and conducted one-on-one interviews to collect the information about their demographic characteristics, dental health activities, and subjective dental health conditions. The collected data were analyzed with T-test, ANOVA and Pearson's correlation coefficient using the SPSS WIN 11.5 program. The analysis results were summarized as follows: First, 58 men(40.8%) and 84 women(59.2%) consisted of the subject group, where percentage of the female participants was bigger Those who were aged from 65 to 69 made the biggest age group in the subjects, accounting for 58.5% with 83. Second, those who had three dental caries or less and then didn't treat them or treated them(F) accounted for the biggest percentage with 117(82.4%) and 72(50.7%) respectively. As for the remaining teeth, the biggest number of them(40 subjects, 28.2%) had three or less remaining. Third, it turned out the female subjects had a higher level of dental health activities than their male counterparts(P = 0.00). As for living expenses, those who were paid salary or earned income themselves carried out their dental health activities in a higher level than those who lived on the benefit from the government(p = 0.02). Fourth, the subjects' subjective dental health conditions had negative correlations with their dental caries not treated. And there were positive correlations between their dental caries not treated and dental caries lost and between their dental caries treated and remaining teeth. Fifth, those subjects who earned their living expenses themselves had the most dental caries treated at 5.4(p = 0.02), and there was statistically significant difference with the numbers. Sixth, those subjects who brushed their teeth in their own manner had 11.8 teeth lost(p = 0.05), which was more than the number of those who brushed their teeth in other methods. And there was statistically significant difference among them. The remaining teeth were found most at 17.3(p = 0.00) among those who brushed their upper and lower teeth separately. In addition, those who visited the public health center often had significantly more teeth treated(4.3) than others(p = 0.00).

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.57-78
• /
• 2023

COVID-19, which started in Wuhan, China in November 2019, spread beyond China in 2020 and spread worldwide in March 2020. It is important to prevent a highly contagious virus like COVID-19 in advance and to actively treat it when confirmed, but it is more important to identify the confirmed fact quickly and prevent its spread since it is a virus that spreads quickly. However, PCR test to check for infection is costly and time consuming, and self-kit test is also easy to access, but the cost of the kit is not easy to receive every time. Therefore, if it is possible to determine whether or not a person is positive for COVID-19 based on the sound of a cough so that anyone can use it easily, anyone can easily check whether or not they are confirmed at anytime, anywhere, and it can have great economic advantages. In this study, an experiment was conducted on a method to identify whether or not COVID-19 was confirmed based on a cough sound. Cough sound features were extracted through MFCC, Mel-Spectrogram, and spectral contrast. For the quality of cough sound, noisy data was deleted through SNR, and only the cough sound was extracted from the voice file through chunk. Since the objective is COVID-19 positive and negative classification, learning was performed through XGBoost, LightGBM, and FCNN algorithms, which are often used for classification, and the results were compared. Additionally, we conducted a comparative experiment on the performance of the model using multidimensional vectors obtained by converting cough sounds into both images and vectors. The experimental results showed that the LightGBM model utilizing features obtained by converting basic information about health status and cough sounds into multidimensional vectors through MFCC, Mel-Spectogram, Spectral contrast, and Spectrogram achieved the highest accuracy of 0.74.

• Journal of Nutrition and Health
• /
• v.57 no.1
• /
• pp.136-152
• /
• 2024

Purpose: A comprehensive evaluation item was developed to assess adolescent dietary habits and nutritional practices, considering food intake, eating behaviors, and food culture, such as social support and food environment. Methods: The 59 candidate items of the evaluation checklist were obtained based on the results of the eighth Korea National Health and Nutrition Examination Survey data, Korea Dietary Reference Intakes, dietary guidelines for adolescents, Youth Risk Behavior Survey data, national nutrition policies and dietary guidelines, and literature reviews. Four hundred and three middle and high school students residing in metropolitan areas participated in a survey using the 58-item checklist, which was selected through expert evaluation and content validity ratio analysis. The construct validity of the assessment tool for the quality of adolescent diets was assessed by exploratory factor analyses to determine if the checklist items were organized properly and whether the responses to each item were distributed adequately. Results: The Bartlett sphericity test was significant for each area (p <0.001), and the eigen values were greater than one. The Kaiser-Meyer-Olkin and cumulative proportions by areas were food intake (0.765 and 56.8%, respectively), eating behaviors (0.544 and 64.8%, respectively), and food environment (0.699 and 62.4%, respectively). Twenty-two checklists were determined for the final evaluation items for the adolescents' dietary habits and nutritional practices and were categorized into three distinct factors: food intake (10 items), eating behaviors (4 items), and food environment (8 items). Conclusion: The evaluation items for adolescent dietary habits and nutritional practices is a useful checklist for easily and quickly assessing the dietary qualities and reflecting Korean adolescents and their food environmental factors related to a sustainable diet.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.241-250
• /
• 1997

The study was conducted to make a map for selecting righteous tree species for each site by digital terrain analysis. We set an algorithmic value for each tree species' characteristics with distribution pattern analysis, and the soil types were digitized from data indicated on soil map. Mean altitude, slope, aspect and micro-topography were estimated from the digital map for each block which had been calculated by regression equations with altitude. The results obtained from the study could be summarized as follows 1. We could develope a method to select righteous tree species for a given site with concern of soil, forest condition and topographic factors on Muju-Gun in Chonbuk province(2,500ha) by the terrain analysis and multi-variate digital map with a personal computer. 2. The brown forest soils were major soil types for the study area, and 29 tree species were occurred with Pinus densiflora as a dominant species. The differences in site condition and soil properties resulted in site quality differences for each tree species. 3. We tried to figure out the accuracy of a basic program(DTM.BAS) enterprised for this study with comparing the mean altitude and aspect calculated from the topographic terrain analysis map and those from surveyed data. The differences between the values were less than 5% which could be accepted as a statistically allowable value for altitude, as well as the values for aspect showed no differences between both the mean altitude and aspect. The result may indicate that the program can be used further in efficiency. 4. From the righteous-site selection map, the 2nd group(R, $B_1$) took the largest area with 46% followed by non-forest area (L) with 23%, the 5th group with 7% and the 4th group with 5%, respectively. The other groups occupied less than 6%. 5. We suggested four types of management tools by silvicultural tree species with considering soil type and topographic conditions.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2001

Synchrotron radiation (SR) has several advantages over convetional x-rays, including its phase, collimation, and high flux. A synchrotron radiation beamline 5C1 at Pohang Light Source (PLS) was recently built for imaging applications. We have shown that a SR imaging system is useful in imaging microscopic structures. SR with broad-band energy spectrum were adjusted to an object by Si wafers and their energy were approximately ranging from 6 keV to 30 keV. SR were passed through an object and finally transformed into visible lights by CdWO$_4$ scintillator screen. The visible lights which were reflected at an angle of 90 degrees by gold plated mirror were detected by a CCD camera and the image data were acquired using image acquisition system. A high-resolution phantom, capacitor, adult tooth, child tooth, cancerous breast tissue, and mouse lumbar vertebra were imaged with SR imaging system. The Objects were rotated within the field of view of the CCD detector, and their projection image data were obtained at 250 steps over 180 degrees rotation. Image reconstructions were carried out in a PC by using IDLTM(Research systems, Inc., US) program. The spatial resolution of the images acquired by the SR imaging system was measured with a high-resolution chart manufactured for several micrometer resolution. The specimens were also imaged with conventional x-ray radiography system to compare the image quality of radiography obtained with the SR imaging system. The results showed more structural details and high contrast images with SR imaging system than conventional x-ray radiography system. The SR imaging system may have a potential for imaging in biological researches, material applications, and clinical radiography.