• 한국환경과학회지
• /
• 제22권7호
• /
• pp.905-913
• /
• 2013

We compared the applicability and economical efficiency of peroxone process with those of ozone process in the existing water treatment plant on downstream of Nakdong River. After comparing the peroxone process for removing geosmin with the ozone process in lab scale test, peroxone process showed much higher removal efficiency than the ozone process at the same ozone dosage. Proper range of $H_2O_2/O_3$ ratio were 0.5~1.0 and the half-life of geosmin was about 5.5~6.8 min when the $H_2O_2/O_3$ ratio was set to 0.5 during 1~2 mg/L of ozone dosage. Peroxone process could reduce the ozone dosage about 50 to maximum 30% for the same geosmin removal efficiency compared to the ozone process in the pilot scale test. In case of 1,4-dioxane treatment, peroxone process could have 3~4 times higher efficiency than ozone process at the same ozone dosage. The results of estimating the economical efficiency of ozone and peroxone process for treating geosmin and 1,4-dioxane by using pilot scale test, in case of the removal target was set to 85% for these two materials, the cost of peroxane process could be reduced about 1.5 times compared to ozone process, and in the same production cost peroxone process could have 2~3 times higher removal efficiency than ozone process. The removal efficiency by peroxone process showed a large difference depending on the physicochemical characteristics of target materials and raw water, therefore detailed examination should be carried out before appling peroxone process.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.199-213
• /
• 1993

The function-cost matrix table is not constant, but can be changed by many factors including equipment capacity, level of production technique, fluctuation of production volume, and the continuous development of products. Such changes would give the VE analysists additional work burden. By using computer. in this study, much of the time and effort of the function evaluation could be saved, and the efficiency of the analysis could also be enhanced. The application of the function evaluation data of R Company, as a case analysis, to the function evaluation computer program developed in this study resulted in the faster management of function-cost matrix table and function evaluation.

• 품질경영학회지
• /
• 제15권1호
• /
• pp.82-89
• /
• 1987

The purpose of this study is to analize the common bottle-neck of industrial products for improving competitivences in the international export market. The labor, technology, equipments, raw material and governmental support policies can be used as the quality factors. It is the main purpose of this study to evaluate the efficiency of those factors.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.714-721
• /
• 2018

This study proposes a risk evaluation method based on RAM and AHP data in order to prevent subjectivity of risk assessment. The risk assessment consist of Risk Likelihood(RL) and Risk Consequence(RC) in five levels. However, risk analysis of warships is hard to make a judgment because of small quantity production(Ship), long building period, equipment changes, complexity, various kinds of equipments, etc. The proposed RAM data and AHP analysis method are used to quantify each level quantitatively. RAM(MTBF) date is used to classify the RL, and AHP analysis is used to classify the RC. These scientific and data-based method will increase objectivity as well as efficiency of risk evaluation.

• 한국정보통신학회논문지
• /
• 제23권1호
• /
• pp.7-12
• /
• 2019

정부지원 R&D 사업을 수행하는 기업들은 사업계획서 상에 정량적 평가지표를 제안하고 있다. 그러나 많은 기업들은 정량적 평가지표를 선정하는데 어려움을 겪고 있고 잘못된 평가지표의 선정으로 정량적 결과 도출이 어려운 경우도 있다. 본 논문에서는 기업들이 선정한 정량적 평가지표를 소프트웨어 품질을 정량적으로 측정할 수 있는 ISO/IEC 25023표준에 접목하여 그 경향을 분석한다. 먼저 분석 대상 데이터에 대한 수집방법과 공인시험기관에서 시험한 제품에 대해 산업분야별로 분류하고 기업에서 선정한 정량적 평가지표를 ISO/IEC 25023 표준의 8가지 품질특성별로 분석한다. 다음으로 ISO/IEC 25023 표준의 8가지 품질특성으로 분류한 정량적 평가지표에 대한 분석 결과를 바탕으로 기업들의 주로 선정하는 정량적 평가지표의 품질특성의 경향을 파악하고자 한다. 이를 통해 소프트웨어 제품의 품질을 평가할 수 있는 정량적 평가지표 선정에 도움이 될 것으로 기대된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.791-796
• /
• 2001

Welding using lasers can be mass-produced in high speed. In the laser welding, performing real-time evaluation of the welding quality is very important in enhancing the efficiency of welding. In this study, the plasma and molten metal which are generated during laser welding were measured using the UV sensor and IR sensor. The results of laser welding were classified into five categories such as optimal heat input, little low heat input, low heat input, focus off, and nozzle change. Also, a system was formulated which uses the measured signals with a fuzzy pattern recognition method which is used to perform real-time evaluation of the welding quality and the defects which can occur in laser welding. Weld quality prediction program was developed using previous weld results and statistical program which could show the trend of weld quality and signal was developed.

• 한국IT서비스학회지
• /
• 제7권3호
• /
• pp.31-45
• /
• 2008

The number of national research and development(R&D) projects have been continually increased, and it is necessary that the efficiency of investment of R&D projects have been improved during the last two decades. also the government has improved national R&D process and supporting tools for the projects. However, it is not enough to develop a quality model to evaluate the projects systematically. Therefore, a quality model for national R&D projects need to be revised. The quality model for the projects should be based on the global standard(ISO/IEC 9126). In this paper, the authors proposed a quality model for national R&D projects and took a case study for verification of the quality model. The quality model is defined in terms of functionality, reliability, usability, efficiency, portability and maintainability. Also, the authors suggest metrics for measuring the quality of products or services. finally, The productivity and quality of national R&D projects will be improved by the quality model.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• 한국조사연구학회지:조사연구
• /
• 제11권2호
• /
• pp.161-176
• /
• 2010

본 논문은 학위논문에 사용된 여론조사 자료의 품질을 평가하였으며, 또한 학위논문에 사용되는 데이터의 품질평가 모형을 제시하였다. 데이터의 품질평가와 평가모형에 사용한 평가지표는 한국조사연구학회에서 제시한 조사윤리강령 제3조의 16가지 항목을 사용하였다. 연구결과 학위논문에 사용된 여론조사 데이터의 품질은 낮은 수준임을 확인할 수 있었다. 16개 항목별로 석 박사학위에 따른 유의적인 차이가 있는지를 확인하기 위하여 두 집단 간 비율 차이 검정을 실시한 결과 표집오차와 분석방법의 수에서만 차이가 있을 뿐 다른 지표에서는 차이가 나타나지 않았다. 끝으로 학위논문에 사용된 여론조사 자료의 질을 평가하기 위한 품질평가를 위해 9가지 주요 평가지표에 가중치를 부여하는 모형을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2113-2116
• /
• 2010

Management of indoor air quality of underground subway station is an important issue. The air handling unit (AHU) installed in the underground subway station is the main facility determining the air quality of station. Especially for removing particulate matters, it is important to operate the appropriate air filter. However, there is no quantitative test method for existing air filter in site. It is rarely known that the collection efficiency of air filter can satisfy the designed criteria or not. In this study, we set the reference method using the mini-volume air sampler inside the AHU to evaluate the collection efficiency of different types of air filters. In addition, we applied the portable instrument based on the light-scattering method to the efficiency test. The method we applied in this study can be used in the evaluation of air filter in site.