• 전자공학회논문지
• /
• 제51권2호
• /
• pp.156-160
• /
• 2014

Thresholding in frequency domain is a simple and effective noise reduction technique. Determination of the threshold is critical to the image quality. The optimal threshold minimizing the Mean Square Error (MSE) is chosen adaptively in the wavelet domain; we utilize an equation of the MSE for the soft-thresholded signal and the histogram of wavelet coefficients of the original image and noisy image. The histogram of the original signal is estimated through the deconvolution assuming that the probability density functions (pdfs) of the original signal and the noise are statistically independent. The proposed method is quite general in that it does not assume any prior for the source pdf.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.672-677
• /
• 2004

This paper is on determination method of preconsolidation pressure and consolidation coefficient using Kores University Calibration Chamber System(KUCCS). High-quality, large-size cohesive soil specimen was prepared by using two-stage slurry consolidation technique, which has many advantage for research and calibration purpose. The result from consolidation stage in KUCCS was compared with results of oedometer test. The results by Casagrcnde method gave very good agreement with preconsolidation pressure in slurry consolidometer. And, the predicted consolidation coefficient by log t method showed agreement with the experimental results in KUCCS.

• Journal of Ginseng Research
• /
• 제15권1호
• /
• pp.1-5
• /
• 1991

For the quality control of crude drug drink preparations, methods for identification of cinnamon components and quantitative determination of cinnamic acid were established. Cinnamon components were identified by TLC with benzene/ethyl acetate (1:1, v/v) on silica gel plate by spraying p-anisaldehyde-sulfuric acid. Cinnamic acid contents were determined at UV 280 nm by HPLC on $\mu$-Bondapak Cls column with acetonitrile/water/acetic acid (40:60:2, v/v). Recoveries of cinnamic acid in three crude drug drink preparations were between 84.1-90.2% compared to the content of the cinnamon extract.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1309-1316
• /
• 2003

The general dicing process cuts a semiconductor wafer to lengthwise and crosswise direction by using a rotating circular diamond blade. But products with inferior quality are produced under the influence of several parameters in dicing process such as blade, wafer, cutting water and cutting conditions. Moreover we can not apply this dicing method to GaN wafer, because the GaN wafer is harder than the other wafer such as SiO2, GaAs, GaAsP, and AlGaAs. In order to overcome this problem, development of a new dicing process and determination of dicing parameters are necessary. This paper describes a new wafer dicing method using fixed diamond scriber and precision servo mechanism and determination of several parameters - scribing depth, scribing force, scriber inclined angle, scribing speed, and factor for scriber replacement - for a new dicing machine using scriber.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.293-304
• /
• 1996

Historical interest in dielectric properties of agricultural products and definitions of dielectric terms and basic principles governing their influence on elelctromagnetic energy are presented briefly . The nature of dielectric properties variation with frequency, temperature , and product density is discussed, Graphical data on the dielectric properties of products are presented that illustrate the dependence of these properties on moisture content, frequency, temperature, and density. Applications microwave dielectric properties of agricultural products are cited that include radio-frequency (RF) and microwave heating for seed treatment, improvement of nutritional and keeping qualities of some products, and controlling insects in grain. Uses of dielectric properties for product quality measurement and the rapid determination of moisture content are described. Principle of moisture determination in bulk grain by RF and microwave measurements are briefly presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.133-137
• /
• 2002

This paper summarizes the results of a numerical study conducted to analyze the determination of optimum blank diameter on material flow and thread profile for Spindle Screw in external thread rolling. Initial blank diameter affect a quality of Spindle Screw in thread rolling process. Therefore, it is very important to determine the optimum blank diameter in thread rolling process. In order to determine the optimum blank diameter, this paper suggest the calculating method of initial blank diameter considering real shape of tooth. The finite element code DEFORM is applied to analyze the metal flow of tooth. then the analytical results are verified by experiment of thread rolling for Spindle Screw.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.14-21
• /
• 1997

In delay-optimized designs, timing failures due to manufacturing delay defects are more likely to occur because the average timing slacks of paths decrease and the system becomes more sensitive to smaller delay defect sizes. In this paper, the impact of delay optimized logic circuits on delay fault testing will be discussed and compared to the case for non-optimized designs. First, we provide a timing optimization procedure and show that the resultant density function of path delays is a delta function. Next we also discuss the impact of timing optimization on the yield of a manufacturing process and the defect level for delay faults. Finally, we will give some recommendations on the determination of the system clock time so that the delay-optimized design will have the same manufacturing yield as the non-optimized design and on the determination of delay fault coverage in the delay-optimized design in order to have the same defect-level for delay faults as the non-optimized design, while the system clock time is the same for both designs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.283-289
• /
• 2004

Rail defects(Corrugation, shelling, etc) are occurred by the Rail with wheel contact stress. Rail grinding is maintaining of optimal rail profile to use special rail grinding machine to remove rail defect. The benefits of rail grinding enforcement, improve track safety, improve track steering and rail life, improve ride comfort and reduce noise, etc. Actually when rail grinding plan apply to field track, we should consider a lot of function before determination, such as grinding method, grinding pass number, removing metal volume, etc. because each track has various characteristics. Therefore it is important that the determination of rail grinding strategy for optimum and economic before enforcement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.997-1000
• /
• 2007

Achieving white balance is one of the key issues for LCD image quality enhancement. A well-known color correction algorithm is Accurate Color Capture (ACC). Determination of ACC correction values has been time consuming as past methods have required trial-and-error analysis of differences between predicted and measured values. We propose a new ACC value determination method that uses spatially emulated patterns and measured values on patterns.

• 분석과학
• /
• 제7권4호
• /
• pp.461-469
• /
• 1994

매달린 수은전극에서 N-Benzoylphenylhydroxylamine을 리간드로 사용하여 흡착벗김 전압전류법으로 PIPES 완충용액에서 극미량의 바나듐을 정량하였다. 이 때 흡착전위 +0.15V, 흡착시간 10초에서 바나듐의 검정곡선은 $10{\sim}70{\mu}g/L$ 범위에서 직선성을 나타내었다. 그리고 다른 금속 이온의 영향은 없었다.