• 한국해안·해양공학회논문집
• /
• 제25권6호
• /
• pp.394-404
• /
• 2013

본 연구에서는 너울성파랑을 정의하기 위한 첫 단계로 확률모의실험을 통해 파랑스펙트럼 첨두모수 $Q_p$, 주파수폭대역 모수 ${\varepsilon}$, 파랑스펙트럼 폭 모수 ${\nu}$의 특성들을 분석하였다. 이를 위해 유의파고 및 첨두주기의 결합확률 밀도함수를 새롭게 유도한 후, MCMC(Markov Chain Monte Carlo)기법을 이 함수에 적용하여 가상의 유의파고 및 첨두주기를 생성하였다. 그리고, 이 때 생성된 파랑자료들을 파랑스펙트럼모형에 적용하여 각각에 대한 파랑스펙트럼 형상모수들을 산정한 다음, 각각의 파랑자료들과 파랑스펙트럼 형상모수들의 상관관계 계수를 산정하는 방법으로 각 파랑스펙트럼 형상모수의 특성들을 조사하였다. 본 연구의 결과에 의하면, 파랑스펙트럼 형상모수 중 파랑스펙트럼 첨두모수가 유의파고 및 첨두주기에 관계없이 파랑스펙트럼의 뾰족한 정도를 잘 나타내고 있었는데, 이러한 특성은 후포 및 울릉도 파랑관측자료에서도 동일하게 나타나고 있는 것으로 확인되었다. 너울성파랑 정의를 위한 대표적인 파랑스펙트럼 형상모수로 파랑스펙트럼 첨두모수를 사용하는 것이 가장 적절한 것으로 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.285-291
• /
• 2003

An experimental method to measure Q-parameter in-situ is described. The basic idea comes from the fact that the side necking near a crack tip indicates the loss of stress triaxiality, which can be scaled by Q. From the out-of-plane displacement and the in-plane strain near the surface of side necking, stress field averaged through the thickness is calculated and then Q is determined from the difference between the stress field and the HRR field corresponding to the identical J-integral. To prove the validity, three-dimensional finite element analysis has been performed for a CT configuration with side-groove. Q-value which was calculated directly from the near-tip stress field is compared with that determined by simulating the experimental procedure according to the proposed method, that is, the Q-value determined from the lateral displacement and the inplane strain. Also, the effect of location where the displacement and strain are measured is explored.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.1021-1028
• /
• 2004

Kim et al. suggested an experimental method to determine the Q parameter in situ from the out-of-plane displacement and the in-plane strains on the surface of side necking near the crack tip. In this paper, the procedure to evaluate the stress triaxiality near a crack tip such as the Q parameter is to be polished in the details for simplicity and accuracy. That is, Q and hydrostatic stress are determined only from the out-of-plane displacement, but not using in-plane strain, which is hard to measure. And also, the plastic modulus is determined by an alternative way. Through three-dimensional finite element analyses for a standard CT specimen with 20% side-grooves, the validities of the new procedures are examined in comparison to the old ones. The effect of location where the displacements are measured to determine the stress triaxiality is explored.

• 대한수학회보
• /
• 제46권6호
• /
• pp.1159-1173
• /
• 2009

This paper deals with the critical blow-up and extinction exponents for the non-Newton polytropic filtration equation. We reveals a fact that the equation admits two critical exponents $q_1,\;q_2\;{\in}\;(0,+{\infty})$) with $q_1\;{<}\;q_2$. In other words, when q belongs to different intervals (0, $q_1),\;(q_1,\;q_2),\;(q_2,+{\infty}$), the solution possesses complete different properties. More precisely speaking, as far as the blow-up exponent is concerned, the global existence case consists of the interval (0, $q_2$]. However, when q ${\in}\;(q_2,+{\infty}$), there exist both global solutions and blow-up solutions. As for the extinction exponent, the extinction case happens to the interval ($q_1,+{\infty}$), while for q ${\in}\;(0,\;q_1$), there exists a non-extinction bounded solution for any nonnegative initial datum. Moreover, when the critical case q = $q_1$ is concerned, the other parameter ${\lambda}$ will play an important role. In other words, when $\lambda$ belongs to different interval (0, ${\lambda}_1$) or (${\lambda}_1$,+${\infty}$), where ${\lambda}_1$ is the first eigenvalue of p-Laplacian equation with zero boundary value condition, the solution has completely different properties.

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.153-174
• /
• 2012

Micromechanical facture models can be used to predict ductile fracture in steel structures. In order to calibrate the parameters in the micromechanical models for the largely used Q345 steel in China, uniaxial tensile tests, smooth notched tensile tests, cyclic notched bar tests, scanning electron microscope tests and finite element analyses were conducted in this paper. The test specimens were made from base metal, deposit metal and heat affected zone of Q345 steel to investigate crack initiation in welded steel connections. The calibrated parameters for the three different locations of Q345 steel were compared with that of the other seven varieties of structural steels. It indicates that the toughness index parameters in the stress modified critical strain (SMCS) model and the void growth model (VGM) are connected with ductility of the material but have no correlation with the yield strength, ultimate strength or the ratio of ultimate strength to yield strength. While the damage degraded parameters in the degraded significant plastic strain (DSPS) model and the cyclic void growth model (CVGM) and the characteristic length parameter are irrelevant with any properties of the material. The results of this paper can be applied to predict ductile fracture in welded steel connections.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.289-295
• /
• 2013

It is important to know exact values of Interior Permanent Magnet Synchronous Motors(IPMSM)' parameters such as stator resistance and inductance in order to have their high performance. This paper proposes a novel motor parameter(stator resistance, d&q axis inductance) estimation algorithm for IPMSM. The proposed estimation method utilizes back-EMF equations and model reference adaptive system(MRAS). The algorithm using back-EMF estimates d and q axis inductances in the constant torque region, and the stator resistance is estimated by using MRAS with the estimated inductance regardless of speed regions. The validity of the proposed algorithm is verified by simulations and experiments.

• 대한수학회논문집
• /
• 제34권2호
• /
• pp.465-475
• /
• 2019

Let X be a Banach space and $X^*$ be its dual. In this paper, we give relationships among some parameters in $X^*$: ${\varepsilon}$-nonsquareness parameter, $J({\varepsilon},X^*)$; ${\varepsilon}$-boundary parameter, $Q({\varepsilon},X^*)$; the modulus of smoothness, ${\rho}_{X^*}({\varepsilon})$; and ${\varepsilon}$-Pythagorean parameter, $E({\varepsilon},X^*)$, and weak orthogonality parameter, ${\omega}(X)$ in X that imply uniform norm structure in X. Some existing results are extended or approved.

• 대한수학회지
• /
• 제34권3호
• /
• pp.707-717
• /
• 1997

The square of Brownian density process $Q^\lambda$ is defined where $\lambda$ is a parameter. Applying limit theorems of stochastic integrals w.r.t. martingale measure, we prove a weak limit theorem for $Q^\lambda$ in $D_{S'(R^d)}[0,1]$.

• 대한수학회지
• /
• 제33권4호
• /
• pp.763-775
• /
• 1996

For $Q = [0,S] \times [0,T]$ let C(Q) denote Yeh-Wiener space, i.e., the space of all real-valued continuous functions x(s,t) on Q such that x(0,t) = x(s,0) = 0 for every (s,t) in Q. Yeh [10] defined a Gaussian measure $m_y$ on C(Q) (later modified in [13]) such that as a stochastic process ${x(s,t), (s,t) \epsilon Q}$ has mean $E[x(s,t)] = \smallint_{C(Q)} x(s,t)m_y(dx) = 0$ and covariance $E[x(s,t)x(u,\upsilon)] = min{s,u} min{t,\upsilon}$. Let $C_\omega \equiv C[0,T]$ denote the standard Wiener space on [0,T] with Wiener measure $m_\omega$. Yeh [12] introduced the concept of the conditional Wiener integral of F given X, E(F$\mid$X), and for case X(x) = x(T) obtained some very useful results including a Kac-Feynman integral equation.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.45-50
• /
• 2010

EPCglobal Class-1 Gen-2 standard proposed Q-algorithm to select a frame size for the next query round. Q-algorithm calculates the frame size without estimating the number of tags. Therefore, the Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it is impossible to allocate the optimized frame size. Also. the conventional Q-algorithm does not define an optimized parameter value C for adjusting the frame size. In this paper, we propose a modified Q-algorithm with the tag number estimation scheme, and evaluate the performance with computer simulations.