• Journal of Korean Society of Steel Construction
• /
• 제21권4호
• /
• pp.421-432
• /
• 2009

In this study, push-out and static loading tests were conducted to evaluate the behavioral characteristics of composite beams with a perfobond rib shear connector. The shear capacity of the perfobond rib was found to be proportional to its concrete strength, which is in turn affected by the increase in the concrete end-bearing strength and concrete dowel action to resist the shear force. The relative slips of the push-out specimen, however, which was used to assess the ductility of the shear connector, increased to some extent, but it no longer increased when it reached the critical concrete strength because of the flexibility of the transverse rebar in the rib hole. The static-loading-test results revealed a crack on the concrete slab in the composite beam with a perfobond rib on the side of the rib hole and transverse rebar for the applied moment and shear force to the rib hole, depending on the static loading. The shear resistance characteristics of the perfobond rib shear connector were found to resist the shear force from the relative slip on the interface of the composite beam. Thus, the sectional effect of the shear connector to the composite beam with a perfobond rib should be considered when designing the composite beam because the behavior of the composite beam can change owing to the shear connector.

• The Journal of the Convergence on Culture Technology
• /
• 제6권4호
• /
• pp.179-186
• /
• 2020

Wongyo Lee KwangSa (1705~1777) is a scholar and artist who represented an era in the period of change and revival of Korean culture and art in the 18th century. In 1755 (31st Yeongjo), he was transferred to Sinjido due to the Naju Byeokseo Incident, and died in exile for a total of 23 years. He tried to correct the problems of the flow of calligraphy in common writing and the flow of calligraphy in the Joseon Dynasty, and wrote 『Wonkyo Seogyeol』. By realizing an original artistic state that is evaluated as having completed the 'Dongguk Jinche', which is a unique and subjective and self-conscious calligraphic flow of the Korean people who wants to reestablish the essence of calligraphy, it has had an absolute influence on the Honam area. Wonkyo's calligraphy aesthetics are developed into the beauty of ChanggyeongBalsog based on Shimjin of Yangminghak, Yanggangmi of Power of controlling all the stands of brush hair, and Vitality of Push out the brush with all your might. He recognized free sculpting and energetic, muscular strokes as the key to calligraphy, and suggested honing the old tombstones written in JeonYe. Vibrant stroke means that Cheongi naturally permeates in the midst of Samgwa and Gilgok, and the brush is operated with Push out the brush with all your might of Power of controlling all the stands of brush hair. These calligraphy aesthetics radiated sinchae with geungol and singi, and were expressed in Wongyo font, full of vitality as a living creature, pursuing the unique pilgrimage and pilgrimage unique to our nation, revealing the true nature of nature.

• Journal of Biomedical Engineering Research
• /
• 제23권5호
• /
• pp.385-390
• /
• 2002

Nowadays, there are many attempts to develop domestic medical-equipments. In this study, it is performed to developed a new vertebral fusion device. The basic models are a rectangular-frame type and a screw type which are generally used for the patients. The main purpose of the development of a new device is to reduce the amount of bone taken out for the insertion of a device to vertebral disc and this paper is focused on th concept of a new device shape. In the results, two types are devised. One is a folding type and the other is a separate-push-in type device both are in primitive stage. However, in a folding type there are mechanical pins and the analysis of pins and the lock system is still in study and needs some time. Therefore a separate-push-in type is introduced in this study mainly and a prototype and 3-D finite element model are made and experimented and stress analyzed. From the results it is considered that it is stable for the basic loading condition of vertebra, however, it is required to develop a supporting operational equipment for the convenience of the operation in practice.

• Korean Journal of Applied Biomechanics
• /
• 제18권3호
• /
• pp.51-59
• /
• 2008

The objective of this study is to kinematically analyze forehand & backhand strokes of abscission handicap wheelchair table tennis athletes. The participant of this study were picked out of national athletes who have abscission handicap. Forehand stroke movement was expected to show a throw like motion. However, external rotation and internal rotation of the right arm created a backswing and an impact. Backhand stroke was expected to show a push like motion, and as expected, proximal part of the body didn't participate in the stroke motion, but the distal part, the right arm, rotated internally to backswing and external rotated to impact to form a push like motion. Forehand swing was expected to show throw like motion according to the Link Segmental System principle. However, abscission handicap athlete didn't show clear linking structure connecting proximal and distal parts. Successful strokes were dependant only on the angle of arm rotation.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.235-237
• /
• 2003

멀티미디어 데이터 전송이 가능한 초고속 통신망의 발달로 음성을 위주로 서비스하던 과거와는 다른 self-similar 특성을 갖는 데이터 트래픽이 발생된다는 것이 알려지고 있다. 이러한 트래픽은 전통적인 네트워크 해석 방법인 포와송 트래픽 모델과는 상당히 차이가 난다는 것이 여러 트래픽의 측정 결과 나타나고 있다. 본 논문에서는 공유 메모리를 갖는 CS(Complete Sharing), DT(Dynamic Threshold), PO(Push-Out) 그리고, SMXQ(Sharing with Maximum Queue)와 같은 다양한 ATM(Asynchronous Transfer Mode) 스위치의 버퍼 관리 기법을 이용하여 입력포트에 self-similar 성질을 갖는 트래픽이 들어올 때 출력포트에서의 self-similarity와 셀 손실률 그리고, 이용률 등을 분석한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제21권12호
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• Nuclear Engineering and Technology
• /
• 제34권5호
• /
• pp.468-481
• /
• 2002

There are 4 CANDU6 type reactors operating at Wolsong site. For fuelling operation of certain fuel channels (with flow less than 21.5 kg/s) a FARE flow Assist Ram Extension) device is used. During the refuelling operation, two remote controlled F/Ms (Fuelling Machines) are attached to a designated fuel channel and carry out refuelling job. The upstream F/M inserts new fuel bundles into the fuel channel while the downstream F/M discharges spent fuel bundles. In order to assist fuelling operation of channels that has lower coolant How rate, the FARE device is used instead of F/M C-ram to push the fuel bundle string. The FARE device is essentially a How restricting element that produces enough drag force to push the fuel bundle string toward downstream F/M. Channels that require the use of FARE device for refuelling are located along the outside perimeter of reactor. This paper presents the FARE device design feature, steady state hydraulic and operational characteristics and behavior of the device when coupled with fuel bundle string during fuelling operation. The study showed that the steady state performance of FARE device meets the design objective that was confirmed by downstream F/M C-ram force to be positive.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2008

High-speed train of push-pull type called as G7 train has been developed and chosen as the model of KTX-II which will be operated on Honam Line nexr year. However, the EMU-type high-speed train appeared to be the recent trend that foreign markets have shown. Also, in the near future, a great number of new train sets are needed to accommodate the increased passengers in our country. Thus, development of the high-speed EMU was decided, planned, and started. In the development, included were almost all fundamental key technologies such as noise and vibration reduction in a passenger cabin, running characteristics, aerodynamic analysis, crashworthiness evaluation, EMI/EMC analysis, design of the cooling system for the propulsion control system, enhanced performance of transformer and switching converters, synchronous traction motor with permanent magnets, new design of front nose and ergonomic interiors, application of advanced information technology(IT) and smart sensors and the cost reduction of construction of railway bridges, etc. Each key technologies are carried out as sub-project independently but under the supervision of a project. The project will develop the high advanced level of technologies and provide necessary know-why's and support the team in charge of the development of the high-speed EMU, Hyundai Rotem Co. Ltd. The high-speed EMU will be successfully developed with the support of the project.

• Asia pacific journal of information systems
• /
• 제8권3호
• /
• pp.181-194
• /
• 1998

The inability of the management information systems (MIS) field to progress as a scientific discipline has been attributed to the lack of systematic research and a cumulative tradition, an identity crisis, and the poverty of scientism. While research on the status of MIS is very important in order to enhance the field as a scientific discipline, few have investigated this issue. Following Thomas Kuhn's idea of paradigm, this paper studies other fields to investigate when they progressed, when they did not, and why. After research paradigm was broken down into technology-push and demand-pull types, a model on the science life cycle was developed in an effort to explain the path how a science has progressed. A test of this model in the fields of physics and chemistry with an old historial background reveals that the scientific progress in the area of demand-pull is more desirable if this progress turns out to be in the right direction. An application of the model to the MIS field shows that the research paradigm in this field is mainly of technology-push. In order to shift this paradigm toward the demand-pull area, this paper suggests the research on the relationship among MIS subfields and the adoption of appropriate reference disciplines.

• The Journal of the Korea Contents Association
• /
• 제18권1호
• /
• pp.441-451
• /
• 2018

The main point of this study is to use the principle of Coriolis force and the sense of fingertips to scratch the surface of the wall by high-speed rotation (RPM) to push the texture of the stripe from the inside to the outer wall, and to express the beautiful, dynamic and distinctive outer wall texture that is diversified by Coriolis force (centrifugal force). This is designated as Coriolis force technique. In addition, instead of the traditional flat bottom foot onggi molding technique, a new type of flat bottom foot that uses the electric wheel to push the cylinder from inside to out to expand the outer wall and to spread the bottom of foot flatly. The purpose of this study is to create a modernized, distinctive, new interior work by fusing these techniques.