• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.494-513
• /
• 2019

A multi-channel access problem based on hypergraph model in ultra-dense small cell networks is studied in this paper. Due to the hyper-dense deployment of samll cells and the low-powered equipment, cumulative interference becomes an important problem besides the direct interference. The traditional binary interference model cannot capture the complicated interference relationship. In order to overcome this shortcoming, we use the hypergraph model to describe the cumulative interference relation among small cells. We formulate the multi-channel access problem based on hypergraph as two local altruistic games. The first game aims at minimizing the protocol MAC layer interference, which requires less information exchange and can converge faster. The second game aims at minimizing the physical layer interference. It needs more information interaction and converges slower, obtaining better performance. The two modeled games are both proved to be exact potential games, which admit at least one pure Nash Equilibrium (NE). To provide information exchange and reduce convergecne time, a cloud-based centralized-distributed algorithm is designed. Simulation results show that the proposed hypergraph models are both superior to the existing binary models and show the pros and cons of the two methods in different aspects.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.547-552
• /
• 2019

Electrochemical properties of $LiMn_{0.8}Fe_{0.2}PO_4$ cathode were investigated with gel polymer electrolyte (GPE). To access fast and efficient transport of ions and electrons during the charge/discharge process, a pure and well-crystallized $LiMn_{0.8}Fe_{0.2}PO_4$ cathode material was directly synthesized via spray-pyrolysis method. For high operation voltage, polyacrylonitrile (PAN)-based gel polymer electrolyte was then prepared by electrospinning process. The gel polymer electrolyte showed high ionic conductivity of $2.9{\times}10^{-3}S\;cm^{-1}$ at $25^{\circ}C$ and good electrochemical stability. $Li/GEP/LiMn_{0.8}Fe_{0.2}PO_4$ cell delivered a discharge capacity of $159mAh\;g^{-1}$ at 0.1 C rate that was close to the theoretical value ($170mAh\;g^{-1}$). The cell allows stable cycle performance (99.3% capacity retention) with discharge capacity of $133.5mAh\;g^{-1}$ for over 300 cycles at 1 C rate and exhibits high rate-capability. PAN-based gel polymer is a suitable electrolyte for application in $LiMn_{0.8}Fe_{0.2}PO_4/Li$ batteries with perspective in high energy density and safety.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.101-111
• /
• 2021

To improve the potential of single chamber microbial fuel cells (SCMFCs) as an applicable technology, the main challenge is a practical application for larger scales bioenergy production from potent exoelectrogenic microorganism with real dairy wastewater. To increase power generation, three individual MFCs were together operated in series best under the fed batch condition for 15 days. The volume of MFC 1 and MFC 2 is "300 mL" and MFC 3 is "500 mL" respectively. The individual MFCs 1, MFC 2 and MFC 3 gives an open circuit voltage of 0.60 V, 0.66 V and 0.55 V and result in total working voltage when connected in series of 1.745V, which lead an LED to glow. The maximum power densities obtained from MFC 1, MFC 2 and MFC 3 are 62 mW/㎡, 50 mW/㎡ and 45 mW/㎡ (normalized to the surface area of the anodic electrode, which was 50 ㎠ for all three MFCs), and corresponding to current densities of 141 mA/㎡, 155 mA/㎡ and 123 mA/㎡, respectively. Therefore this work suggests the cheapest way to connect microbial fuel cells in series to gain power with the lowest operating cost and chemical oxygen demand (COD) removal.

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.24-37
• /
• 2021

China's "One Belt and One Road" initiative has brought multiple opportunities to the development of tourism in Guangdong, Guangxi and Hainan provinces and the implementation of the Beibu Gulf Urban Agglomeration Development Plan hasset clear goalsforfurther accelerating the coordinated development, in-depth cooperation of the three. This study takes the Beibu Gulf Urban Agglomeration as the research object and utilized the data envelopment analysis (DEA) procedure to estimate the technical efficiency, pure technical efficiency, and scale efficiency scores for each city and Malmquist index was subsequently used to analyze dynamically, then tries to offer an adequate inclusion of sustainable factors in overall tourism development efficiency results through the detection and estimation of potential sources of efficiency. In order to complete the task, data collection was focused on Guangdong, Guangxi and Hainan provinces of China over the period from 2016 to 2018. The results in the first phase show relatively high efficiency scores, particularly in the case of the Beibu Gulf Urban Agglomeration and with room for improvement in the case of other cities of Guangdong, Guangxi and Hainan provinces. The second stage results present several aspects that should be carefully considered in order to analysis tourism efficiency of the Beibu Gulf Urban Agglomerations vertically according to the changes of the frontier.

• Journal of Plant Biotechnology
• /
• 제49권3호
• /
• pp.257-270
• /
• 2022

The aim of this work was to prepare a new biodegradable polyhydroxybutyrate (PHB) submicron fiber mat loaded with hypericin-rich Hypericum perforatum raw extract by centrifugal spinning technology, an alternative approach to the traditional method of electrospinning to fabricate nanofibers or microfibers from solutions at high speed and low cost. Hypericins in methanol/acetone extract of H. perforatum were determined by UHPLC-MS/MS and HPLC/PDA. Submicron fiber mats composed of pure PHB or PHB enriched with H. perforatum extract were prepared using a pilot plant demonstrator for the centrifugal spinning technology and characterized by SEM. Singlet oxygen production was quantified by the 1,3-diphenylisobenzofuran (DPIBF) method in hexane. The results proved a significant production of singlet oxygen by the prepared submicron fiber mat. We also found a significant antibacterial activity against the bacterial strain Escherichia coli CCM 5417 by a method in accordance with JIS Z 2801/ISO 22196 standards. The H. perforatum extract-enriched PHB submicron fiber mats showed potential for the development of self-cleaning and antimicrobial air filters.

• Steel and Composite Structures
• /
• 제43권4호
• /
• pp.483-500
• /
• 2022

Cold-formed steel wall panels sheathed with gypsum plasterboard have shown superior thermal and structural performance in fire. Recent damage caused by fire events in Australia has increased the need for accurate fire resistance ratings of wall systems used in low- and mid-rise construction. Past fire research has mostly focused on light gauge steel framed (LSF) walls under uniform axial compression and LSF floors under pure bending. However, in reality, LSF wall studs may be subject to both compression and bending actions due to eccentric loading at the wall to-roof or wall-to-floor connections. In order to investigate the fire resistance of LSF walls under the effects of these loading eccentricities, four full-scale standard fire tests were conducted on 3 m × 3 m LSF wall specimens lined with two 16 mm gypsum plasterboards under different combinations of axial compression and lateral load ratios. The findings show that the loading eccentricity can adversely affect the fire resistance level of the LSF wall depending on the magnitude of the eccentricity, the resultant compressive stresses in the hot and cold flanges of the wall studs caused by combined loading and the temperatures of the hot and cold flanges of the studs. Structural fire designers should consider the effects of loading eccentricity in the design of LSF walls to eliminate their potential failures in fire.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1674-1688
• /
• 2023

The remarkable advancement of quantum steganography offers enhanced security for quantum communications. However, there is a significant concern regarding the potential misuse of this technology. Moreover, the current research on identifying malicious quantum steganography is insufficient. To address this gap in steganalysis research, this paper proposes a specialized quantum steganalysis algorithm. This algorithm utilizes quantum machine learning techniques to detect steganography in general quantum secure communication schemes that are based on pure states. The algorithm presented in this paper consists of two main steps: data preprocessing and automatic discrimination. The data preprocessing step involves extracting and amplifying abnormal signals, followed by the automatic detection of suspicious quantum carriers through training on steganographic and non-steganographic data. The numerical results demonstrate that a larger disparity between the probability distributions of steganographic and non-steganographic data leads to a higher steganographic detection indicator, making the presence of steganography easier to detect. By selecting an appropriate threshold value, the steganography detection rate can exceed 90%.

• International Journal of Advanced Culture Technology
• /
• 제11권4호
• /
• pp.346-351
• /
• 2023

With the rapid development of Artificial Intelligence (AI) technology, there is an increasing variety of methods for creating 3D models. These include innovations such as text-only generation, 2D images to 3D models, and combining images with cue words. Each of these methods has unique advantages, opening up new possibilities in the field of 3D modeling. The purpose of this study is to explore and summarize these methods in-depth, providing researchers and practitioners with a comprehensive perspective to understand the potential value of these methods in practical applications. Through a comprehensive analysis of pure text generation, 2D images to 3D models, and images with cue words, we will reveal the advantages and disadvantages of the various methods, as well as their applicability in different scenarios. Ultimately, this study aims to provide a useful reference for the future direction of AI modeling and to promote the innovation and progress of 3D model generation technology.

• Journal of Microbiology and Biotechnology
• /
• 제27권1호
• /
• pp.92-100
• /
• 2017

Acetoin (AC) is a volatile platform compound with various potential industrial applications. AC contains two stereoisomeric forms: (3S)-AC and (3R)-AC. Optically pure AC is an important potential intermediate and widely used as a precursor to synthesize novel optically active materials. In this study, chiral (3R)-AC production from meso-2,3-butanediol (meso-2,3-BD) was obtained using recombinant Escherichia coli cells co-expressing meso-2,3-butanediol dehydrogenase (meso-2,3-BDH), NADH oxidase (NOX), and hemoglobin protein (VHB) from Serratia sp. T241, Lactobacillus brevis, and Vitreoscilla, respectively. The new biocatalyst of E. coli/pET-mbdh-nox-vgb was developed and the bioconversion conditions were optimized. Under the optimal conditions, 86.74 g/l of (3R)-AC with the productivity of 3.61 g/l/h and the stereoisomeric purity of 97.89% was achieved from 93.73 g/l meso-2,3-BD using the whole-cell biocatalyst. The yield and productivity were new records for (3R)-AC production. The results exhibit the industrial potential for (3R)-AC production via whole-cell biocatalysis.

• 한국유기농업학회지
• /
• 제23권4호
• /
• pp.867-873
• /
• 2015

유기자재의 토양 중 질소 무기화 특성을 구명하기 위해 유박(CF-I, CF-II), 아미노산(AAF-I, AAF-II)을 각각 처리하여 28주간 항온시험을 실시하였다. 항온기간 동안 누적 질소 무기화량을 1차 반응 속도식(first-order kinetics)에 적용하여 잠재적 질소무기화량($N_0$)를 평가 한 결과 AAF-II에서 27.71 N mg/100g로 가장 높았으며, CF-I에서 21.69 N mg/100g로 가장 낮았다. 그리고 잠재적 순질소무기화량($N_0$ treatment - $N_0$ control)은 CF-I, CF-II, AAF-I, AAF-II 처리에서 각각 2.55, 5.83, 3.66, 8.57 N mg/100g으로 나타났으며, 28주 동안 실제 질소무기 화량의 97.3-112.9%에 해당되었다. 특히 유박, 아미노산을 처리한 토양의 유기태 질소의 무기화 반감기($t_{1/2}$)는 17-21일로 유박과 아미노산 비료에 포함된 질소는 3주 이내에 무기화되는 것을 확인하였다. 따라서 유기농업에 이용되는 유박과 아미노산에 함유된 질소의 1/2는 3주 이내에 모두 무기화되는 것으로 나타났다.