• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.481-482
• /
• 2011

New discrete time domain models for the peak current controlled (PCC) power LED drivers in continuous conduction mode include for the first time the effects of time delay in the pulse-width-modulator. Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between two conduction modes. Especially, the time delay can provide an accurate LED current for the PCC buck converter with a wide input voltage. The models can also predict the critical inductor values at the mode boundary as functions of the input voltage and the time delay.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1807-1809
• /
• 2002

In this study, asolid-state laser system adopting a firing time control(FTC) method in which three flashlamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC one-chip microprocessor With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and the real-time control is possible with an external keyboard enabling various pulse shapes. In addition longer pulses can be more widely used for industrial processing and lots of medical purposes.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.127-132
• /
• 2001

We describe the pulse forming of pulsed $CO_2$laser using multi-pulse superposition technique. A various pulse length, high duty cycle pulse forming network(PFN) is constructed by time sequence. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on SCRs of three PFN modules consecutively at a desirable delay time with the aid of PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a High voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage and drive the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence. We investigated laser pulse shape and duration as various trigger time intervals of SCRs among three PFN modules. As a result, we can obtain laser beam with various pulse shapes and durations from about 250 $mutextrm{s}$ to 600 $mutextrm{s}$.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.112-115
• /
• 2007

A CMOS TDC(time-to-digital converter) is proposed which has a simple cyclic structure. The proposed TDC consists of pulse-shrinking elements, D latches and D flip-flops. The operation is based on pulse-shrinking of the input pulse. The resolution of digital output can be easily improved by increasing the number of the pulse-shrinking elements, D latches and D flip flops. The TDC performance is improved in viewpoints of power consumption and chip area. Simulation results are shown to illustrate the performance of the proposed TDC circuit.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.61-68
• /
• 1999

For the last two decades, waveform control techniques have been successively developed and applied for the inverter welding machines resulting in the substantial reduction of spatter generated in CO₂ welding. One of the constituents commonly involved in those techniques is to delay the instant of current increase to some extent after the initiation of short-circuiting. Although this technique has been known to be quite effective in reducing the spatter generation through the suppression of is instantaneous short circuiting, the delay time necessary for minimum spatter has not been clearly understood. In this study, the control system for varying the delay time was constructed so that the spatter generation rates could be measured over a wide range of delay time, 0.29-2.0 msec. As a result of this study, it was demonstrated that spatter generation rate(SGR) sharply decreased at delay time of 0.6 msec and longer accompanied with the change in characteristics of short circuit mode from the instantaneous short-circuiting(ISC) dominant to normal short-circuiting(NSC) dominant. Another feature that have been found in current waveform of over 0.6msec was the creation of current pulse right after the arc reignition stage. Because of this current pulses weld pool oscillated in wave-like fashion and it looks like to play an important role in developing short circuiting between electrode and weld pool.

• 한국결정성장학회지
• /
• 제2권1호
• /
• pp.30-36
• /
• 1992

$LiNbO_3$단결정의 조성비 변화에 따른 탄성표면파 특성을 축정하기 위해 47-50 $Li_2O$ mol% 조성의 $LiNbO_3$단결정을 성장시켜 $128^{\circ}$Y cut wafer를 제조하였다. 제작된 wafer 위에 사진식각법을 이용하여 지연선(Delay line)을 형성시켰다. Pulse-echo overlap mehtod로 지연시간을 측정하여, 탄성표면파 속도$(V_s)$, 전기기계결합계수$(K_s^2)$ 및 $-50^{\circ}C~100^{\circ}C$ 온도 범위에서 지연시간 온도계수(TCD)의 조성비에 대한 의존성을 조사하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권4호
• /
• pp.155-160
• /
• 2003

In this study, an Alexandrite laser system for hair removal adopting a multi-discharge method in which three flash lamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. Specifically, this study demonstrates a technology that makes it possible to formulate various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC (program integrated circuit) one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and real-time control is possible with an external keyboard, enabling an assortment of pulse shapes. In addition, longer pulses can be more widely used for industrial processing as well as for numerous medical purposes.

• 전자공학회논문지
• /
• 제51권8호
• /
• pp.156-164
• /
• 2014

Field programmable gate array 기반 시간-디지털 변환기(Time to Digital Converter)로 가장 널리 사용되는 딜레이 라인(tapped delay line) 방식은 딜레이 라인의 길이가 길어지면 정확도가 떨어지는 단점이 있다. 이에 본 논문에서는 동일한 시간 해상도를 가지면서 딜레이 라인의 길이를 줄일 수 있도록 4 위상 클럭을 사용하고 이중 상태 판별 제어부를 가지는 시간-디지털 변환기 구조를 제안한다. 4 위상 클럭 별로 딜레이 라인 구성 시 발생하는 라인 간 딜레이 오차를 줄이기 위해 입력신호와 가장 가까운 클럭과의 시간 차이만 하나의 딜레이 라인으로 측정하고 어떤 위상 클럭이 사용되었는지를 판별하는 구조를 가졌다. 또한 싱크로나이저 대신 이중 상태 측정 state machine을 이용하여 메타스태이블을 판별함으로써, 싱크로나이저로 인한 딜레이 라인의 증가를 억제하였다. 제안한 시간-디지털 변환기(TDC)의 성능 측정 결과 1 ms의 측정 시간 범위에 대해 평균 분해능 22 ps, 최대 표준편차 90 ps을 가지며 비선형성은 25 ps였다.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.342-348
• /
• 2015

본 논문에서는 펄스 모드 발진기와 지연선로를 이용하여 새로운 감지 형태를 갖는 버블형 동작감지기를 제안하고, 설계 및 제작하였다. 제안된 동작감지기는 송신 신호의 펄스폭으로 버블 형태의 감지 영역을 형성하며, 지연선로에 의해 시간 지연되는 거리에 해당하는 물체에서 반사된 신호만을 감지하여 IF 신호를 만들어낸다. 제작된 동작감지기는 중심주파수 8 GHz, 펄스 폭 2 nsec, 펄스 주기 30 nsec를 갖는 펄스 모드 발진기를 신호원으로 사용하였으며, 7 nsec와 12 nsec의 지연 시간을 갖는 선로 2개를 사용하여 1 m, 3 m, 5 m의 위치에 버블막 형태의 감지 영역을 성공적으로 형성하여 물체를 감지하였다.