• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.99-104
• /
• 2010

The purpose of this study is to develop Sewage Treatment Plant that treat sewage which occurred in ship using fixed media method and to consider applicable to the Pilot Scale device of the STP regulations in MLTM(Ministry of Land, Transport and Maritime Affairs) and MEPC(Marine Environment Protection Committee). In test results, pH geometric mean was 7.68, $BOD_5$(Biochemical Oxygen Demand) geometric mean was 7.28 mg/l, $COD_{cr}$(Chemical Oxygen Demand) geometric mean was 48.39 mg/l, TSS(Total Suspended Solid) geometric mean was 18.00/l, Residual chlorine geometric mean was 0.19 mg/l, and E. coli geometric mean was 1CFU/100 ml. In addition, about 97.4% of $BOD_5$ was reduced, the $COD_{cr}$ reduction averaged 96.4%and the TSS reduction averaged 97.6%. STP have been determined by the MLTM and MEPC regulation of the marine pollution prevention equipment for performance testing product.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.305-314
• /
• 2023

With the development of medical technology and radiation treatment equipment, the frequency of high-precision radiation therapy such as intensity modulation radiation therapy has increased. Image-guided radiation therapy has become essential for radiation therapy in precise and complex treatment plans. In particular, with the introduction of imaging equipment for diagnosis in a linear accelerator, CBCT scanning became possible, which made it possible to calibrate and correct the patient's posture through 3D images. Although more precise reproduction of the patient's posture has become possible, the exposure dose delivered to the patient during the image acquisition process cannot be ignored. Radiation optimization is necessary in the field of radiation therapy, and efforts to reduce exposure are necessary. However, when acquiring 3D CBCT images by changing the imaging conditions to reduce exposure, there should be no image quality or artefacts that would make it impossible to align the patient's position. In this study, Rando phantom was used to scan and evaluate images for each shooting condition. The highest SNR was obtained at 100 kV 80 mA 25 ms F1 filter 180°. As the tube voltage and tube current increased, the noise decreased, and the bowtie filter showed the optimal effect at high tube current. Based on the actual scanned images, it was confirmed that patient alignment was possible under all imaging conditions, and that image-guided radiation therapy for patient alignment was possible under the condition of 70 kV 10 mA 20 ms F0 filter 180°, which showed the lowest SNR. In this study, image evaluation was conducted according to the imaging conditions, and low tube voltage, tube current, and small rotation angle scan are expected to be effective in reducing radiation exposure. Based on this, the patient's exposure dose should be kept as low as possible during CBCT imaging.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.95-102
• /
• 2017

The fires in the traditional markets often occur recently with the most of them expanded into great fires so that the damage is very serious. The status of traditional markets handling the distribution for ordinary people is greatly shrunk with the aggressive marketing of the local large companies and the foreign large distribution companies after the overall opening of the local distribution market. Most of the traditional markets have the history and tradition from decades to centuries and have grown steadily with the joys and sorrows of ordinary people and the development of the local economy. The fire developing to the large fire has the characteristics of the problem that the fire possibility is high since all products can be flammable due to the deterioration of facilities, the arbitrary modification of equipment, and the crowding of the goods for sale. Furthermore, most of the stores are petty with their small sizes so that the passage is narrow affecting the passage of pedestrians. Accordingly, the traditional markets are vulnerable to fire due to the initial unplanned structural problem so that the large scale fire damage occurs. The study is concerned with systematically classifying and analyzing the result by applying the TRIZ tool to the fire risk factors to extract the fundamental problem with the fire of the traditional market and make the active response. The study was done for preventing the fire on the basis of it and the expansion to the large fire in case of fire to prepare the specific measure to minimize the fire damage. On the basis of the fire expansion risk factor of the derived traditional market, the study presented the passive measures such as the improvement of the fire resisting capacity, the fire safety island, etc. and the active and institutional measures such as the obligation of the fire breaking news facilities, the application of the extra-high pressure pump system, the divided use of the electric line, etc.

• Journal of Radiation Protection and Research
• /
• v.25 no.4
• /
• pp.207-216
• /
• 2000

Continuous measurements of radon progeny concentrations in the open atmosphere and measurements of meteorological parameters were performed in Tajeon, using a continuous gross alpha/beta aerosol monitor and a weather measuring equipment between July 1999 and July 2000. These data were analyzed for half-hourly, daily, and seasonal variations. The distribution of daily averaged equilibrium equivalent radon concentration$(EEC_{Rn})$ had an arithmetic mean value of $11.3{\pm}5.86Bqm^{-3}$ with the coefficient of variation of about 50% and the geometric mean was $10.3Bqm^{-3}$. The $EEC_{Rn}$ varies between 0.83 and $43.3Bqm^{-3}$, depending on time of day and weather conditions. Half-hourly averaged data indicated a diurnal pattern with the outdoor $EEC_{Rn}$ reaching a maximum at sunrise and a minimum at sunset. The pattern of the seasonal variation of the $EEC_{Rn}$ in Taejon had a tendency of minimum concentration occurring in the summer(July) and maximum concentration occurring in the late autumn(November). But the seasonal variation of the $EEC_{Rn}$ is expect to vary greatly from place to place. The outdoor $EEC_{Rn}$ was highly dependent on the local climate features. Particularly the $EEC_{Rn}$an rapidly drops less than $5Bqm^{-3}$ in case of blowing heavily higher than wind speed of $6msec^{-1}$, reversely the days with more than $30Bqm^{-3}$ were at a calm weather condition with the wind speed of lower than $1msec^{-1}$.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.109-134
• /
• 2014

Regulation (EC) No 261/2004 of the European Parliament and of the Council of 11 February 2004 establishing common rules on compensation of assistance to passengers in the event of denied boarding and of cancellation or long delay of flights (Regulation No 261/2004) provides extra protection to air passengers in circumstances of denied boarding, cancellation and long-delay. The Regulation intends to provide a high level of protection to air passengers by imposing obligations on air carriers and, at the same time, offering extensive rights to air passengers. If denied boarding, cancellation and long-delay are caused by reasons other than extraordinary circumstances, passengers are entitled for compensation under Article 7 of Regulation No 261/2004. In Wallentin-Hermann v Alitalia-Linee Aeree Italiane SpA(Case C-549/07, [2008] ECR I-11061), the Court did, however, emphasize that this does not mean that it is never possible for technical problems to constitute extraordinary circumstances. It cited specific examples of where: an aircraft manufacturer or competent authority revealed that there was a hidden manufacturing defect on an aircraft which impacts on safety; or damage was caused to an aircraft as a result of an act of sabotage or terrorism. Such events are not inherent in the normal exercise of the activity of the air carrier concerned and is beyond the actual control of that carrier on account of its nature or origin. One further point arising out of the court's decision is worth mentioning. It is not just necessary to satisfy the extraordinary circumstances test for the airline to be excused from paying compensation. It must also show that the circumstances could not have been avoided even if all reasonable measures had been taken. It is clear from the language of the Court's decision that this is a tough test to meet: the airline will have to establish that, even if it had deployed all its resources in terms of staff or equipment and the financial means at its disposal, it would clearly not have been able - unless it had made intolerable sacrifices in the light of the capacities of its undertaking at the relevant time - to prevent the extraordinary circumstances with which it was confronted from leading to the cancellation of the flight.

• Korean Journal of Occupational Health Nursing
• /
• v.6 no.2
• /
• pp.144-155
• /
• 1997

In December 1990, Occupational Safety and Health Law was amended to reinforce employer's responsibilities on employees' health and safety. Among the amended law it was important to expand the role of an occupational health nurse to the role of an occupational health manager. An occupational health manager should take charge of coordinating periodic health examination and environmental hazard evaluation, providing primary care, monitoring employees' health status, giving the workplace walk-through, selecting safe protection equipment, providing health information, counseling and health education, independently. This position of occupational health nurse is equivalent to the role of doctors or occupational hygienists. In 1991, government made a master plan to prevent occupational disease and injury. Under the plan, Korea Industrial Nursing Association (KINA) was established in 1994 with the purpose of improving health services and upgrading career opportunities for members. Therefore, this study was designed to analyze the transition of occupational health nursing education with the changes of law and policy in Korea between 1991 and 1996. In details, it was to analyze the rate of school providing occupational health nursing practice based lecture, lecture hours, lecture contents in undergraduate curriculum, program contents of graduate school, kinds of continuing education, etc. For this purpose, we conducted survey two times. In February 1991, baseline study was conducted with all nursing programs in Korea (19 BSN programs and 43 nursing departments of junior college). From April to May in 1996, the second survey was conducted with all nursing programs (38 BSN programs and 69 junior colleges). The first response rate was 66.1% and the second was 40.6%. Structured questionnaires were mailed to the deans or the community health nursing faculties. In the case of graduate school, telephone survey was conducted with 10 school of public health or environmental health area. Data from the yearbook of Industrial Safety Training Institute (ISTI), the history of Korea Industrial Health Association, and the journals of KINA were also included in the analysis. As the results, we found that there were remarkable improvement in undergraduate and graduate programs, obligatory as well as voluntary continuing education in terms of occupational health nursing expertise between 1991 and 1996. 1) The number of school providing occupational health nursing practice-based lecture was increased with the rate from 7.3% to 25.6%. The rate of school giving over 15 class-hours was increased from 33.3% to 46.6%. 2) Content areas were composed of introduction of occupational health, occupational epidemiology, industrial hygiene, occupational disease and injury, law and policy, health education, concept of occupational health nursing, role of occupational health nurse, occupational health nursing process, etc. Of content areas, occupational health nursing process was more emphasized with the increased rate from 43.9% to 88.4%. 3) In the case of graduate school, occupational health programs were increased from 4 to 10. One of them has developed occupational health nursing program as an independent course since 1991. 4) The law increased educational hours from 28 hours to 36 hours for introductory course at the time of appointment, and from 14 hours to 24 hours every 2 years for continuing education. Course contents were Occupational safety and health law, introduction of occupational health, health education methodology, planning and evaluation, periodic health exam, occupational disease care, primary care, emergency care, management, industrial environment evaluation, etc. In 1996, Korea Industrial Nursing Association has begun to provide continuing education after Industrial Safety Training Institute. 5) Various educational programs in voluntary base were developed such as monthly seminar, CE articles, annual academic symposium, etc. It was shown that changes of law and policy led rapid growth of occupational health nursing education in various levels. From this trend, it is expected that occupational health nurse expertise be continuously to be enhanced in Korea. Legal and political supports should proceed for the development of occupational health nursing in early stage.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.49-56
• /
• 2005

Purpose: Dedicated animal PET is useful equipment for the study of new PET tracer. recently, microPET R4 was installed in the Korea institute of radiology and medical science. In this study, we measured the characteristics of scanner. Materials and methods: Resolution was measured using a line source (F-18:65 ${\mu}Ci$, inner diameter: 0.5 mm). The line source was put in the axial direction and was moved from the center of field of view to outside with 1 mm interval. PET images were reconstructed using a filtered back-protection and ordered subset expectation maximization. line source (16.5 ${\mu}Ci$, 78 mm) was put on the tenter of axial direction to measure the sensitivity when the deadtime was under 1%. Images were acquired during 4 minutes respectively from center to 39 mm outward. Delayed count was subtracted from total count and then decay was corrected for the calculation of sensitivity. Noise equivalent count ratio and scatter fraction were calculated using cylindrical phantom. Results: Spatial resolution of reconstructed image using filtered back-projection was 1.86 mm(radial), 1.95 mm(tangential), 1.95 mm(axial) in the tenter of field of view, and 2.54 mm, 2.8 mm, 1.61 mm in 2 cm away from the center respectively. Sensitivity was 2.36% at the center of transaxial field of view. Scatter fraction was 20%. Maximal noise equivalent count ratio was 66.4 kcps at 242 kBq/mL. Small animal images were acquired for confirmation of performance. Conclusion: Performance characteristics of microPET R4 were similar with reported value. So this will be a useful tool for small animal imaging.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.195-205
• /
• 2016

Sugar beet cyst nematode, Heterodera schachtii, causes serious economic losses worldwide in Brassicaceae crops. In 2011, this nematode was first found in highland vegetable cultivation areas in Korea, and thereafter spread to the surrounding healthy Chinese cabbage fields. However, little has been documented on the biological and ecological characteristics of the sugar beet nematode in highland vegetable cultivation areas. In this study the dispersal of the sugar beet cyst nematode was examined, focusing on spreading through soil and/or water infested with the nematode. When farmers with work boots trampled on Chinese cabbage fields for 10 minutes, the number of cysts recovered from the soil attached to the working differed depending on the research sites. Under irrigation conditions of 2, 4, and 8 liters of water per $m^2$, the amounts of soils attached on the bottom of the work boots and the number of healthy cysts in the soils increased significantly with the increase in soil moisture, although the total number of cysts, eggs, and juveniles did not increase significantly. After driving on the farm road adjacent to cabbage fields infested with the sugar beet cyst nematode, cysts were also recovered from the soil attached to the vehicle's tires, suggesting that the sugar beet cyst nematode can spread to new fields through soil carried by vehicles and by farmers. An excavator and a motor truck could deliver 41 kg and 224 g, respectively, of soil on the shovel shoes and the wheels to other locations during the Chinese cabbage harvest, suggesting that farming equipment and transportation vehicles may be vital means by which the cyst nematode spreads to non-infested fields in the highland area of Korea. Runoff water also contained cysts, whose amounts increased after water irrigation onto the ridges to simulate rainy conditions, with no significant difference in the number of cysts with increasing amounts of irrigation water. All of these results confirmed that the sugar beet cyst nematode spreads through soil attached to work boots, harvesting tools, and transportation vehicles, especially during the harvest time, and through runoff water on rainy days. These observations suggest that personal sanitization and cleaning of working tools and vehicles are one of the most important means to prevent the dispersal of the sugar beet cyst nematode in fields.

• Journal of dental hygiene science
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2007

This study aimed to provide basic information on dental hygienists' practicing the prevention of infections by figuring out their actual conditions in dental clinics. The subjects of the study were the dental hygienists who participated in the continuing medical education of Incheon & Gyeonggi-do association and Seoul city association in October and November 2005 and the self-administered surveys were used for the prevention of infections. The results were as below. 1. In terms of education experiences of infection prevention, those who answered "there were" were 72 persons (42.9%) and those who followed the educational route for infection prevention were "through the in-house education from the hospital" and they were 42 persons (58%), which were highest. 2. In terms of the injury experiences, those who answered "there were" were 147 persons (87.5%) and the number of annual injury out of 147 persons with injury experiences was 7.7 time. For the tools that were damaged, 125 persons (75%) damaged the "explorer," which was highest. 3. For the experiences of being infected with contagious diseases, those who answered "there were" were 6 persons (3.6%) and there were four persons for "hepatitis B", one person for "rubella" and one person for "TB." 4. The questions with high practice scores were as in the following: "2. I wash my hands after conducting medical examinations (1.86 points)," "7. I always close the lid of a shot of Novocain after doing local anesthesia (1.86 points)" and "20. I separate and collect the wastes and give them to those who treat accumulated materials (1.85 points)". Meanwhile, the questions with low practice scores were as below: "16. I change my medical gowns (doctor wears) once a day (0.24 point)" and "I wash my medical gowns every time after examining patients with contagious diseases (0.52 points)." 5. The question with high knowledge was as below: "1. The contagion during the dental treatment is determined by source of infection, infection methods, infection routes and the host that is prone to infection (0.95 point)" and the question with the lowest knowledge was "5. HBV(hepatitis B) is destroyed after adding 95oC of heat for more than 5 minutes (0.27 points)." 6. The question with the highest organization-related factors was "I am always ready to use a mask, gloves, etc. if necessary" (0.89 points)" and the question with the lowest score was "There is a guideline that I can refer when I am exposed to dangerous situations related to the contagion in my workplace (0.33 point)." 7. In terms of the equipment conditions of protectors in medical environments, 168 persons for (disposable) mask (100%), 167 persons for disposable gloves (Latex) (99.4%), which meant that most of them were equipped with them. On the contrary, 108 persons (64.3%) are equipped with the protectors for frontal faces, which is the lowest and 165 persons (98.2%) said that they had autoclave in their disinfecting and sterilizing devices.