• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.619-629
• /
• 2015

열차 경합해소 문제는 열차의 경합이 발생되거나 예측될 때 지연 확산을 최소화하기 위해 열차 운행스케줄을 조정하는 것이다. 기존연구에서는 폭발적으로 증가하는 변수로 인해 풀 수 있는 문제의 크기가 제한적이다. 본 논문에서는 열차 운영단계에서 열차 경합을 해소하기 위해 시공간 네트워크를 이용한 열차 경합해소모형을 제안한다. 제안한 모형은 시공간 네트워크에서 경합발생 이후 운행 열차들에 대해 정차 역에서의 정차 허용치만을 부여함으로써 문제의 크기를 조절하였다. 또한, 경로흐름변수를 사용해 대형문제도 풀 수 있도록 하였다. 제안한 모형을 이용하여 열차경합의 지연파급분석과 경합해소 실험결과를 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.407-412
• /
• 1997

In this paper, we present a new method to diagnose the characteristics of the soft tissue, especially a liver. In order to diagnose the characteristics of a liver, it is necessary to evaluate the propagation delay time and propagation velocity of bending vibration In a liver. For this purpose, we measure the propagation velocity of bending vibration in a liver for low frequency forced vibration using a standard ultrasonic Doppler diagnosis equipment. We have carried out preliminary experiments by using an ultrasonic probe of 3.5MHz and obtained some results. This new measurement method developed here can be applied to new research and medical fields for acoustic non-invasive diagnosis of soft tissue.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.32-38
• /
• 1999

Fatigue crack propagation behavior for block load in high strength aluminum alloys was investigated in this study. The materials used in this study are aluminum alloy 5052-H32. Initial crack was made by applying cyclic load to a through crack with chevron notch. Crack length was measured from calibration curve, which was plotted by known crack length and resistance of standard specimens. Load was obtained from linear regression formula. Unloading elastic compliance method was applied to check the crack closure and cracked area. The present study results can be usefully applied to predicting the change of crack propagation rate, the crack closure, and the delay of crack propagation.

• 한국정보전자통신기술학회논문지
• /
• 제13권2호
• /
• pp.169-175
• /
• 2020

본 논문은 SET에 노출된 전자기기는 불규칙한 작동 및 출력 오류를 나타낼 수 있으므로 집적회로에서 SET 상황에 대해서 연구하였다. 폴디드 캐스코드 비교기에서 지수정류파(iexp)을 이용하여 SET 환경을 설정하였다. 비교기가 SET에 의해 어떤 영향이 있는지에 대해 실험하였다. SET현상을 발생시키지 않은 폴디드 비교기에서는 전파 지연은 0.26㎲, 이득은 0.649으로 측정되었다. SET현상을 발생시킨 폴디드 비교기에서 출력단과 가까운 MOSFET는 민감하게 측정되었으며 전파 지연은 0.36~0.37㎲,이득은 0.649로 계산되었다. 중간에 위치한 MOSFET는 0.28~0.30㎲, 이득은 0.649로 계산되었다. 폴디드 비교기에서 출력단과 가장 멀리 떨어져 있는 MOSFET는 전파지연이 0.25~0.26㎲, 이득은 0.649로 계산되었다. SET 환경에서, 폴디드 비교기에서 출력부분에 가까이 있는 MOSFET는 민감하였다. 그리고 출력부분과 멀리 떨어져 있는 MOSFET에서는 SET를 입력하지 않은 정상적인 폴디드 비교기와 같은 결과를 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.975-978
• /
• 1999

The transmission line effects of IC interconnects have a substantial effect on a hish-speed VLSI circuit performance. The effective transmission lime parameters are changed with the increase of the operation frequency because of the skin of the skin effect, proximity effect, and silicon substrate. A new signal delay estimation methodology based on the RLC-distributed circuit model is presented ［2］. The methodology is demonstrated by using SPICE simulation and a high-frequency experiment technique.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.195-199
• /
• 2002

This paper describes the effect of substrate back bias of CMOS Inverter. When the substrate back bias applied in body, the MOS transistor threshold voltage increased and drain saturation current decreased. The back gate reverse bias or substrate bias has been widely utilized and the following advantage has suppressing subthreshold leakage, lowering parasitic junction capacitance, preventing latch up or parasitic bipolar transistor, etc. When the reverse voltage applied substrate, this paper stimulated the propagation delay time CMOS inverter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.468-472
• /
• 2004

In this paper a VLSI design for the automatic magnetizing system has been presented. This is the design of a peripheral controller, which magnetizes CRTs and computers monitors and controls the automatic inspection system. We implemented a programmable peripheral interface(PPI) circuit of the control and protocol module for the magnetizer controller by using a O.8um CMOS SOG(Sea of Gate) technology of ETRI. Most of the PPI functions has been confirmed. In the conventional method, the propagation/ramp delay model was used to predict the delay of cells, but used to model on only a single cell. Later, a modified "apos;Linear delay predict model"apos; was suggested in the LODECAP(LOgic Design Capture) by adding some factors to the prior model. But this has not a full model on the delay chain. In this paper a new "apos;delay predict equationapos;" for the design of the timing control block in PPI system has been suggested. We have described the detail method on a design of delay chain block according to the extracted equation and applied this method to the timing control block design.

• 전자공학회논문지B
• /
• 제30B권1호
• /
• pp.38-44
• /
• 1993

A model for BICMOS buffer switching operation is presented, including the influence of bipolar base transit time and collector-base capacitances. A closed-form solution for the propagation delay-time is obtained assuming low level injection and channel velocity limitation. For the high level injection case, the delay-times are numerically obtained using effective current gain. These results are compared with those by HSPICE simulation, which shows good agreement. It is noted that the collector-base capacitance strongly affects the delay-time. The effects of voltage scaling are also investigated, which shows the model can be applied for the reduced supply voltages.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.78-87
• /
• 1996

in urban cross-roads with dense buildings, receiving power and delay spread were computed when doing these, we were able to develope codes to be executed in a very fast time by combining image method and algorithm for propagation paths compairing with ray launching technique. And receiving power and delay spread could be viewed in 3-dimensional picture by virtue of computing electric fields in arbitrary receiving point. For numerical computation, receiving power of wide and anrrow band and delay spread were computed, and extension method of ray numbers was facilitated for handling infinite number of rays.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3630-3638
• /
• 1996

An experimental study has been conducted to explore the behaviors of the radiative ignition of polymethylmetacrylate(PMMA) in a confined enclosure such as the ignition delay time, PMMA surface temperature, the ignition location and the ignition process. In addition, the effects of hot wall orientation on the ignition delay and PMMA surface temperature were studied. When the hot wall is located at the bottom, ignition delay time is the shortest. Ignition surface temperature becomes the lowest for the hot top wall case. These are due to buoyancy effect. Since the radiative heat flux of hot wall is rather lower than laser source, the ignition is considered to be controlled by the mixing process. Therefore, the ignition location, where appropriate mixture of fuel and oxygen exists, occurs near the hot wall. The flame propagates along the hot wall where there exists sufficient oxygen.