• 천문학회지
• /
• 제29권spc1호
• /
• pp.137-138
• /
• 1996

The first large-format CCD color-magnitude diagram (CMD) in the B and V passbands is presented for the Galactic globular cluster M53 (NGC 5024). We have discovered 117 new blue straggler (BS) candidates in the field of M53. The analysis of bright BS stars (V <19.0) clearly shows a bimodal radial distribution, with a high frequency in the inner and outer regions. The distribution is similar to that found in M3, a globular cluster with similar central density and concentration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.965-968
• /
• 1997

The objective of this study is to develop a rigid-thermoviscoplastic finite element program for the analysis of orthogonal cutting process. Deformation of the workpiece material is considered as rigid-viscoplastic and the numerical solution is obtained from the coupled analysis bctween plastic deformation and temperature field, including treament of temperature dependent material properties. The chip and the burr formation are simulated for the non-steady state orthogonal cutting using the developed program. To validate the program the predicted results at chip and burr format~on stage are compared with the published ones. The case of isothermal cutting process is also considered to study the thermal effect on the machining process.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.91-94
• /
• 2007

A GUI based pre/post processor program, which is based on the MFC and OpenGL library in the Windows O/S, hee been developed for NUFLEX Using this program, users are able to generate and modify structured or unstructured grid geometries, set all the parameters for the solver, and observe the results of the simulation in graphic view by vector or scalar plots. The mesh geometry data can be imported from or exported to other programs by supporting functions for reading from and writing to CGNS data format files.

• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1263-1271
• /
• 1999

This paper designs the performance analysis layer for the various performance analysis of parallel programs using event expressions are similar to the normal program language to analyze the events which display a dynamic state exchange of a program. The event expressions suggest operations for overloading and functions which are needed in performance analysis, such as a filtering operation, data format translation functions, performance analysis, static functions, and etc. By using the event expressions, the programmer can modify the event trace data to analyze the performance and analyze more easily and variously than the pre-developed tools.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1331-1342
• /
• 2000

In power generation systems a variety of structural components typically operate at high temperature and pressure. Therefore a life assessment methodology accounting for gradual creep fracture is increasingly needed for these components. The most critical defects in such structure are generally found in the form of semi-elliptical surface cracks in the welded tubular joints. Therefore the analysis of a semi-elliptical surface crack in a plate or a shell is an important problem in engineering fracture mechanics. On this background, via shell/line-spring finite element analyses of such surface cracks in the welded T and L joints under various loadings, we investigate J-integral along the crack front We first develop T and L joints auto mesh generation program providing ABAQUS input file composed of shell/line-spring finite elements. We then further develop a T and L joints life assessment program based on the experimental creep crack growth law and auto mesh generation program in a graphical user interface format Finally the remaining life of T and L joints for various analytical parameters are assessed using the developed life assessment program.

• Journal of Information Processing Systems
• /
• 제4권4호
• /
• pp.121-132
• /
• 2008

VLSI chips have been tested using various automatic test equipment (ATE). Although each ATE has a similar structure, the language for ATE is proprietary and it is not easy to convert a test program for use among different ATE vendors. To address this difficulty we propose a tester structure expression language, a tester language with a novel format. The developed language is called the general tester language (GTL). Developing an interpreter for each tester, the GTL program can be directly applied to the ATE without conversion. It is also possible to select a cost-effective ATE from the test program, because the program expresses the required ATE resources, such as pin counts, measurement accuracy, and memory capacity. We describe the prototype environment for the GTL and the tester selection tool. The software size of the prototype is approximately 27,800 steps and 15 manmonths were required. Using the tester selection tool, the number of man-hours required in order to select an ATE could be reduced to 1/10. A GTL program was successfully executed on actual ATE.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.206-209
• /
• 1997

The stereostatic surgery becomes a important part of neurosurgery. The conventional style of stereostatic system uses a input method of film digitizing. It is time consuming and laborious. In this paper, we presented a system that can manage digital images from medical imaging machine to surgery assisting program. CT images were transferred in DICOM format to a surgery assisting computer in a operation room through PACS. The streotatic surgery assisting program processed the digital images and calculated the parameters that were required in steostatic surgery. The assisting program were developed that can detect the reference points automatically, transform CT coordinate to frame coordinate and calculate the RM (Riechert-Mundinger) frame. This system were applied to clinical cases in Seoul National Univ. Hospital. The two advantages of this system were revealed. The processing time from imaging to surgery parameters were much aster than conventional system. The surgery accuracy were more mininute as the digitizing error were reduced. This system were a good application of connecting imaging machines to clinical treatment system through PACS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.57.3-57
• /
• 2002

1. Introduction 2. General flux balance model 3. MetaFluxNet 3.1 Overview of MetaFluxNet 3.2 Project file format 3.3 Construction of metabolite reaction model 3.4 Metabolic flux analysis using linear programming 3.5 Visualization of MFA results 4. Conclusion and plan 5. Acknowledgement. References.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.133-137
• /
• 2000

In this paper, We study on converting data transfer using Image processing method. In the program's code consist of outline trace, noise filtering methode, pont data smoothing, algorithm. We use those Algorithm to create Vectorized data file format from image data. This result can be utilized as a base part for development of Automatic recognition for mechanical drawings.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.1-10
• /
• 1987

용접과정에 필요한 데이타를 신속하게 얻을 수 잇는 용접데이타 시스템(1)을 개발하였다. 용접데이타 시스템은 철강재료의 용접에 적용할 수 있고 관계형 데이타베이스 시스템을 채택하고 있으며 용접 데이타베이스, dBASE 3 PLUS 및 응용 프로그램으로 구성되어 있다. 용접데이타는 용접법, 모재, 용접재료, 이음부 형상, 용접시공 데이타를 수록하고 있으며, 응용프로그램은 데이타의 신규입력, 수정, 삭제, 검색의 4부분으로 구성되어 있고 사용자의 편의를 위해 I/O format program과 graphic 처리를 위한 BASIC 프로그램이 포함되어 있다. 프린터로의 출력은 현장에서 이용 가능한 PQR의 형태를 취하고 있다.