• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.862-869
• /
• 2015

The current study was designed to estimate the pork quality traits using metabolites from exsanguination blood and postmortem muscle simultaneously under the Korean standard pre- and post-slaughter conditions. A total of 111 Yorkshire (pure breed and castrated male) pigs were evaluated under the Korean standard conditions. Measurements were taken of the levels of blood glucose and lactate at exsanguination, and muscle glycogen and lactate content at 45 min and 24 h postmortem. Certain pork quality traits were also evaluated. Correlation analysis and multiple regression analysis including stepwise regression were performed. Exsanguination blood glucose and lactate levels were positively correlated with each other, negatively related to postmortem muscle glycogen content and positively associated with postmortem muscle lactate content. A rapid and extended postmortem glycolysis was associated with high levels of blood glucose and lactate, with high muscle lactate content, and with low muscle glycogen content during postmortem. In addition, these were also correlated with paler meat color and reduced water holding capacity. The results of multiple regression analyses also showed that metabolites in exsanguination blood and postmortem muscle explained variations in pork quality traits. Especially, levels of blood glucose and lactate and content of muscle glycogen at early postmortem were significantly associated with an elevated early glycolytic rate. Furthermore, muscle lactate content at 24 h postmortem alone accounted for a considerable portion of the variation in pork quality traits. Based on these results, the current study confirmed that the main factor influencing pork quality traits is the ultimate lactate content in muscle via postmortem glycolysis, and that levels of blood glucose and lactate at exsanguination and contents of muscle glycogen and lactate at postmortem can explain a large portion of the variation in pork quality even under the standard slaughter conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.605-614
• /
• 2020

Objective: This study was conducted to determine the effects of stale maize on growth performance, immunity, intestinal morphology, and antioxidant capacity in broilers. Methods: A total of 800 one-day-old male Arbor Acres broilers (45.4±0.5 g) were blocked based on body weight, and then allocated randomly to 2 treatments with 20 cages per treatment and 20 broilers per cage in this 6-week experiment. Dietary treatments included a basal diet and diets with 100% of control maize replaced by stale maize. Results: The content of fat acidity value was higher (p<0.05) while the starch, activities of catalase and peroxidase were lower (p<0.05) than the control maize. Feeding stale maize diets reduced (p<0.05) average daily feed intake (ADFI) throughout the experiment, feed conversion ratio (FCR) during d 0 to 21 and the whole experiment as well as relative weight of liver, spleen, bursa of Fabricius and thymus (p<0.05) on d 21. Feeding stale maize diets decreased jejunum villus height (VH) and VH/crypt depth (CD) (p<0.05) on d 21 and 42 as well as ileum VH/CD on d 42. The levels of immunoglobulin G, acid α-naphthylacetate esterase positive ratios and lymphocyte proliferation on d 21 and 42 as well as lysozyme activity and avian influenza antibody H₅N₁ titer on d 21 decreased (p<0.05) by the stale maize. Feeding stale maize diets reduced (p<0.05) serum interferon-γ, tumor necrosis factor-α, interleukin-2 on d 21 and interleukin-6 on d 21 and 42. Broilers fed stale maize diets had lower levels of (p<0.05) total antioxidative capacity on d 42, superoxide dismutase and glutathione peroxidase on d 21 and 42, but higher (p<0.05) levels of malondialdehyde on d 21 and 42. Conclusion: Feeding 100% stale maize decreased ADFI and FCR, caused adverse effects on immunity and antioxidant function and altered intestinal morphology in broilers.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.133-152
• /
• 2015

Some artists and scientists in physics and animation originating from research on its form of expression thanks to the rapid development of the example in the late 20th century image production technology integrating existing media feature, perform a re-creation and pop culture content has been recognized as a key factor. animation of the modern emphasis is also commercial and artistic activities as show whether the artist can not be excluded that also target audience. The audience does not want only to receive offers simply 'seeing' and 'hearing' in the animation requires a more indirect mental met. the other side, the director should lead the audience to immerse myself in work as intended mystification induce the world. where a conflict occurs between the audience and the director and The director needs to have its troubleshooting point to 'Technology of the communication'. Which is reduced to 'How will tell,' is technology communication technologies that are abbreviated representations of animation director is accessible to the audience and it is a close relationship between the psychological aspect of audience. Because, the audience is reproduced in a limited space, but he called on the board of directors and the same time the screen, the audience located at reception and the director located at provide. It is given. led force is given to the director. for this reason, The director needs to pay attention to the psychological aspect of audience this can be explained based on psychoanalytic theory. In this paper, "How can you lie to the audience and the director is the same line?" put down logic that is the animation audience under the logic that takes place visually capture phenomenon "selective attention" and sub-concept of "goal-directed selection' and 'stimulus-driven capturel' for theory of psychology. also, Induction device to elicit selective attention of the audience accordingly, let's consider whether and how they apply in animation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.194-199
• /
• 2017

When sea tide and wave velocity change, the behavior of silt protectors underwater changes, and a hydraulic force exceeding the anchor wave force is applied. In this study, the movement mechanism of a silt protector has been analyzed using the mass-spring method. The initial position of the silt protector was in the Jindo area near Gwangpo Port (742-1, Gyupori, Chongdo-myeon, Jindo-gun, Jeonnam, Korea). The tension required to exceed the holding power of the anchor was 0.05 m/s at 318 sec., 0.15 m/s at 77 sec., 0.25 m/s at 43 sec., and 0.3 m/s at 37 sec.. As the anchor started to move from the sea floor and the tide speed increased to 0.01 m/s, anchor movement start time shortened by an average of 11.2 sec.. Compared with when tide was the only affecting factor, the silt protector and anchor were found to have moved 19.7 % at 0.1 m/s, 7.6 % at 0.15 m/s, 5.8 % at 0.2 m/s, 4.3 % at 0.25 m/s and 2.8 % at 0.3 m/s, showing an increase. When wave effect was added to the tide, anchor movement started when the flow rate was slow 7.6 % of the time. With a high flow velocity, anchor movement started without any significant difference less than 4.3 % of the time. When tide speed exceeded 0.13 m/s and the direction of the waves matched, the silt protector was not able to perform due to collisions with surrounding sea structures. When installing a silt protector, the fluid flow situation and the silt protector situation must be carefully analyzed using the mass-spring method to apply the result found in this study.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.1
• /
• pp.89-105
• /
• 2020

This study aimed at analyzing the clothing management units of technology and home economics textbooks in terms of their contents related to Education for Sustainable Development(ESD). The inquisitive tendency of the textbooks was also examined adopting the modified Romey's method, because it is known as an important factor in increasing student's class participation in sustainable clothing management and inducing practical behavior. First, the learning contents of clothing management unit were analyzed according to the social/political/cultural, environmental, and economic perspectives of ESD. As a result, ESD contents from social/political/cultural perspectives (safety, and health and food), environmental perspectives (natural resources, energy, and environmental problem), and the economic perspectives (sustainable production and consumption) were identified, with a heavy focus on environmental perspective. Secondly, Romey's inquisitive content analysis method was modified to analyze texts, pictures/charts, and learning activities of the clothing management unit. In all textbooks, facts and definitions were the dominant types of contents, which means less opportunities for development of inquiry ability. In conclusion, the ESD contents of the clothing management unit are inclined to the environmental perspective, and it is necessary that textbook development would need to be balanced between three perspectives. Also, future textbook authors will need to improve the inquisitive tendency of the textbooks to encourage student participation in class and induce practical application in real life.

• Journal of Hydrogen and New Energy
• /
• v.30 no.1
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.777-789
• /
• 2020

Intense artificial selection has been imposed to Luzhong mutton sheep population in the past years. Improvements on growth and reproductive performance are two breeding goals in the present herd. Although some progresses were phenotypically observed possibly due to inbreeding induced by strong selection in terms of these traits, the genomic evaluation was poorly understood. Therefore, a high-density SNP array was used to characterize the pattern of runs of homozygosity (ROH), estimate inbreeding and inbreeding depressions on early growth performance and litter size based upon ROH, and scan positive selection signatures of recent population. Consequently, a low inbreeding level was observed which had negative effects on litter size, but not on early growth performance. And 160 genes were under selection, of which some were reported to be linked to several traits of sheep including body weight, litter size, carcass and meat quality, milk yield and composition, fiber quality and health, and the top genes were associated with growth (growth hormone [GH]- growth hormone receptor [GHR]- Insulin-like growth factor 1 [IGF1] axis) and litter size (bone morphogenic proteins [BMPs]-associated). The effectiveness of previous breeding measures was highlighted, but purging selection was proposed to alleviate the inbreeding depression on litter size, providing some genomic insights to breeding management of Luzhong mutton sheep.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.565-575
• /
• 2019

The ethanolic seed extracts of the common buckwheat (CB) and tartary buckwheat (TB) were examined for their anti-oxidant and anti-inflammatory effects on lipopolysaccharide (LPS)-induced RAW 264.7 cells. In this study, it was observed that the rutin content of TB extracts was 65-78 times higher than the CB extracts, while quercetin was only detected in the TB extracts. In addition, TB extracts were observed to have 1.8-2.0 times higher flavonoid and polyphenolic content than the CB extracts. Cytotoxicity was not observed when both the buckwheat extracts were evaluated at concentrations in the range of 6.25-400 ㎍/mL. The treatment with TB extracts significantly suppressed the LPS-induced nitric oxide (NO) production and inducible nitric oxide synthase (iNOS) expression at the protein and mRNA levels. The TB extracts more potently inhibited the LPS-induced production of tumor necrosis factor (TNF)-α, interleukin (IL)-1β, and IL-6 than the CB extracts. The mRNA levels of TNF-α, IL-1β, and IL-6 were also significantly inhibited both by the TB and CB extracts in a pattern similar to their production.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2008

This study attempted to provide reference materials for improving the behavior level in radiation safety managements by drawing a prediction model that affects the radiation safety management behavior because the radiation safety management of medical Cyclotrons, which can be used to produce radioisotopes, is an important factor that protects radiation caused diseases not only for radiological operators but average users. In addition, this study obtained follows results through the investigation applied from January 2 to January 30, 2008 for the radiation safety managers employed in 24 authorized organizations, which have already installed Cyclotrons, through applying a specific form of questionnaire in which the validity was guaranteed by reference study, site investigation, and focus discussion by related experts. The radiation safety management were configured as seven steps: Step 1 is a production preparation step, Step 2 is an RI production step, Step 3 is a synthesis step, Step 4 is a distribution step, Step 5 is a quality control step, Step 6 is a carriage container packing step, and Step 7 is a transportation step. it was recognized that the distribution step was the most exposed as 15 subjects (62.5%), the items of 'the sanction and permission related works' and 'the guarantee of installation facilities and production equipments' were the most difficult as 9 subjects (37.5%), and In the trouble steps in such exposure, the item of 'the synthesis and distribution' steps were 4 times, respectively (30.8%). In the score of the behavior level in radiation safety managements, the minimum and maximum scores were 2.42 and 4.00, respectively, and the average score was $3.46{\pm}0.47$ out of 4. Prosperity and well-being programs in the behavior and job in radiation safety managements (r=0.529) represented a significant correlation statistically. In the drawing of a prediction model based on the factors that affected the behavior in radiation safety managements, general characteristics, organization characteristics, and selfefficacy didn't show a significant path statistically in which the prosperity and well-being programs in job characteristics affected the behavior in radiation safety managements. Therefore, it is necessary to establish a strategy that improves the level of prosperity and well-being levels in job characteristics in order to increase the behavior in radiation safety managements. Thus, this study provides basic materials for the radiation safety management of Cyclotron through the full-scale investigation that is first applied in Korea.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.316-333
• /
• 2021

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain's age, the captain's career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were 'hauling net operation,' 'readjustment and storage of fishing gear,' and 'fish handling' and the hardest factor in fishing management were in the order of 'reduction of catch,' 'labor shortage' and 'rising labor costs.' The most institutional improvement that is most needed in coastal improved stow net fishery was an 'using fine mesh nets.' Most of the respondent to the questions on the experience in hiring foreign crews was 'either hiring or willing to hire foreign crews,' and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was 'high labor costs.' The degree of communication with foreign crews during fishing operation were 'moderate' or 'difficult to direct work.' The most important problem in hiring foreign crews (the first priority) was an 'illegal departure.' As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a 'fish warehouse.' The most preferred equipment for the construction of new fishing vessel were 'engine operation monitoring' and 'navigation safety devices.' The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.