• Journal of Photoscience
• /
• v.10 no.1
• /
• pp.175-180
• /
• 2003

Zeolite, Nafion membranes and vesicles were used as microreactors to control the pathway of photosensitized oxidation of alkenes and remarkable selectivity was achieved.

• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.43-53
• /
• 2003

The selectivity of a gas in the carbon molecular sieve membrane (CMSM) can be expressed as the ratio of the product of the diffusivity and the solubility of two different gases. The diffusivity is also expressed as the product of the entropy and the total energy (kinetic and potential energy) in the nano-sized pore of the membrane. The present study calculates the entropic-energy and selectivity of penetrant gases such as H$_2$, O$_2$, N$_2$, and CO$_2$ from the gas-in-a box theory to physically analyze the diffusivity of penetrant gas in slit-shaped pore of CMSM focusing on the restriction of gas motion based on the size difference between penetrant gas pairs. The contribution of each energy term is converted to entropic term separately. By the conjugated calculation for each entropic-energy, the entropic effects on diffusivity-selectivity for gas pairs such as H$_2$/N$_2$, CO$_2$/N$_2$, and O$_2$/N$_2$ were analyzed within active pore of CMSM. In the activated diffusion domain, the calculated value of entropic-selectivity lies between 9.25 and 111.6 for H$_2$/N$_2$, between 3.36 and 6.0 for CO$_2$/N$_2$, and between 1.25 and 16.94 for O$_2$/N$_2$, respectively. The size decrement of active pore in CMSM had the direct effect on the reduction of translational entropic-energy and the contribution of vibrational entropic-energy for N$_2$, O$_2$, and H$_2$ was almost negligible. However, the vibrational entropic term of CO$_2$ might extravagantly affect on the entropic-selectivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2535-2542
• /
• 2011

This study was researched by practical method in a subjectivity study accessible in-depth, in sloughing off old habit of functional quantity analysis about product-selectivity on role of Home-shopping TV MD. The perception pattern come out in this study were divided into four types in Q-methodology. The result is as follows ; it is that divided '1[(N=9) : No-relationship Type], 2[(N=3) : Experience-oriented Type], 3[(N=5) : Ability-focus Type], 4[(N=1) : Drive-importance Type]'. Like this, it found that is very different type all over. In conclusion, this study is to ascertain acceptance behavior about Reception Type on product-selectivity on role of Home-shopping TV MD ; to offer a developmental suggestion about it.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.199-199
• /
• 2010

Polymeric membranes have been widely used to separate gas mixtures, such as $O_2/N_2,\;CO_2/CH_4,\;CO_2/N_2$, and olefin/paraffin. The permeation selectivity is the ratio between composition ratio at the permeate side and composition ratio at the feed side. In addition, the permeation selectivity is a product of solubility selectivity and diffusivity selectivity. We present a novel idea and describe its experimental result, which was achieved by preparing polymer gel films that included a room temperature ionic liquid (RTIL) in a polymer matrix. It is known that $CO_2$ can dissolve easily in imidazolium-based RTILs. We prepared polymer-ionic liquid gel films using an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim] acetate, C-tri) and a host polymer, poly (vinyl acetate) (PVAc, Aldrich).

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.573-576
• /
• 2016

In this study, hydrogenation of 1,2,3,3,3-pentafluoropropene was performed to produce R-1234yf as an environmentally friendly refrigerant. Palladium based carbon was prepared as a catalyst in the hydrogenation reaction. The effect of reaction conditions including the weight hourly space velocity (WHSV), reaction temperature and ratio of hydrogen and reactants on the catalytic performance was investigated. Under the identical reaction conditions, the effect of WHSV on the main product selectivity was insignificant, but a high reaction temperature was essential for the good product selectivity. A high product selectivity was also obtained when the ratio of hydrogen and reactants kept less than 1.5. Moreover, a correlation model involving the statistical approach to predict product yields was developed.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.12-16
• /
• 1995

The diastereoselectivity of addition reaction of crotylmetal reagents to cobalt-complexed acetylenic aldehydes and metal-free aldehydes was examined. The anti-diastereomer was the predominant product when the crotyl metallics were Cr, Sn, and Zr. In THF, the uncomplexed aldehydes normally gave higher anti-diastereoselectivity. However, the cobalt-complex of silicon-substituted propynals with three bulky substituents produced increased proportions of syn-diastereomer. In DMF, the selectivity shifted towards syn-isomer except in the case of dimethylphenylsilyl substituent. When tributylstannane was used in the presence of BF3 etherate, moderate syn- selectivity was observed with uncomplexed aldehydes, but only decomposed products from complexed aldehydes.

• Rapid Communication in Photoscience
• /
• v.4 no.1
• /
• pp.9-11
• /
• 2015

The debromination of phenethyl bromide by the $B_{12}-TiO_2$ hybrid catalyst under UV light irradiation was investigated. The catalytic efficiency was dependent on the type of $TiO_2$. The anatase form of $TiO_2$ was superior to the rutile form of $TiO_2$. The selectivity of the product was also dependent on the crystal structure of $TiO_2$, and the rutile form of $TiO_2$ showed a high selectivity for the formation of the coupling product, 2,3-diphenylbutane, when compared to that of the anatase form of $TiO_2$.

• Journal of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.360-369
• /
• 1990

Borosilicate, HZSM-5 zeolite and iron-substituted borosilicate and HZSM-5 zeolite were prepared and their catalytic properties in methanol conversion were studied. The effects of strength and amount of acid site determined from TPD spectra of ammonia on the product distribution was examined. Selectivity to propylene was high over borosilicate with small amount of strong acid site, but selectivity to aromatic compound was high over HZSM-5 zeolite with large amount of the strong acid site. The participation of weak acid site on the conversion did not confirmed, and the product distribution could be explained in terms of the amount of the strong acid site. Although the amount of the weak acid site was increased by substitution of iron, there was no meaningful change in the product distribution.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4117-4121
• /
• 2012

The solvolysis rate constants of allyl chloroformate ($CH_2=CHCH_2OCOCl$, 3) in 30 different solvents are well correlated with the extended Grunwald-Winstein equation, using the $N_T$ solvent nucleophilicity scale and $Y_{Cl}$ solvent ionizing scale, with the sensitivity values of $0.93{\pm}0.05$ and $0.41{\pm}0.02$ for l and m, respectively. These l and m values can be considered to support a $S_N2$ reaction pathway. The activation enthalpies (${\Delta}H^{\neq}$) were 12.5 to 13.4 $kcal{\cdot}mol^{-1}$ and the activation entropies (${\Delta}S^{\neq}$) were -34.4 to -37.3 $cal{\cdot}mol^{-1}{\cdot}K^{-1}$, which is also consistent with the proposed bimolecular reaction mechanism. The solvent kinetic isotope effect (SKIE, $k_{MeOH}/k_{MeOD}$) of 2.16 was also in accord with the $S_N2$ mechanism. The values of product selectivity (S) for the solvolyses of 3 in alcohol/water mixtures was 1.3 to 3.9, which is also consistent with the proposed bimolecular reaction mechanism.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.658-664
• /
• 2020

Zeolite HY is wet impregnated with Ni (0.1, 0.3, 0.4, 0.5 wt%), Pt (0.1 wt%) and reduced in presence of hydrogen to form nanosized particles of Ni and Pt. All the catalysts were characterized by XRD, TEM, ESCA, NH₃-TPD, Pyridine adsorbed FT-IR and BET. Characterization results confirm that the Ni and Pt fractions effectively rehabilitated the physio-chemical properties of the zeolite HY catalysts. Further, all the reduced catalyst were screened with hydroisomerization of m-xylene at LHSV = 2.0 h^-1 in the temperature range 250-400 ℃ in steps of 50 ℃ in hydrogen atmosphere (20 ml/g). The addition of Ni to Pt catalyst increases hydroisomerization conversion, as well as maximizes p-xylene selectivity by restricting the pore size. The increasing trend in activity continues up to 0.3 wt% of Ni and 0.1 wt% Pt addition over zeolite HY. The increasing addition of Ni increases the total number of active metallic sites to exposed, which increases the metallic sites/acid sites ratio towards the optimum value for these reactions by better balance of synergic effect for stable activity. The rate of deactivation is pronounced on monometallic catalysts. The results confirm the threshold Ni addition is highly suitable for hydroisomerization reaction for product selectivity over Ni-Pt bimetallic/support catalysts.