• Computers and Concrete
• /
• v.14 no.2
• /
• pp.145-161
• /
• 2014

The article presents the statistical method of grouping the results of the compressive strength of concrete in continuous production. It describes the method of dividing the series of compressive strength results into batches of statistically stable strength parameters at specific time intervals, based on the standardized concept of "concrete family". The article presents the examples of calculations made for two series of concrete strength results, from which sets of decreased strength parameters were separated. When assessing the quality of concrete elements and concrete road surfaces, the principal issue is the control of the compressive strength parameters of concrete. Large quantities of concrete mix manufactured in a continuous way should be subject to continuous control. Standardized approach to assessing the concrete strength proves to be insufficient because it does not allow for the detection of subsets of the decreased strength results, which in turn makes it impossible to make adjustments to the concrete manufacturing process and to identify particular product or area on site with decreased concrete strength. In this article two independent methods of grouping the test results of concrete with statistically stable strength parameters were proposed, involving verification of statistical hypothesis based on statistical tests: Student's t-test and Mann - Whitney - U test.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.117-133
• /
• 2014

The purpose of this study was to compare with shopping behavior and satisfaction of who have visited Dongdaemun and Myeongdong and to provide the fundamental data for differentiation strategy of two fashion trading area. The survey was carried out targeting shoppers who were in Dongdaemun and Myeoongdong and then a total of 778 questionnaires were used for the data analysis; frequency, t-test, chi-squre independence test using SPSS. 20. The results of this study were as follows. Main shoppers in Dongdaemun were the teenagers and twenties, and in Myeongdong were twenties and thirtys. The shoppers who have visited Dongdaemun significantly considered 'store factor' such as store size and comfortability, store interior, store location and accessibility, and 'product factor' including material and quality, design, formfitting, and various sizes, while Myeongdong visitors thought 'promotion factor'such as business hours, one stop shopping, sale and event etc. as important factor. The degree of satisfaction for marketing mix of Myeongdong trade area was higher than Dongdaemun's one. The case of impulse buying in two trade area was not high, while intention to revisit Dongdaemun and Myenongdong was all higher than average. Consumers were more intended to recommend Myeongdong over Dongdaemun to others.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.33-38
• /
• 2004

This study was performed to know watertightness and reduction effect and crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based inorganic compound made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.5-2.0\%$ of adding ratio of fluosilicate salt based inorganic compound. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. Effect of crack reduction was evaluated by length, drying shrinkage as well as stress change of hardened concrete at unrestraint/restraint state and also elucidated crack pattern on the concrete surface. It is ascertained that characteristics of crack resistance and watertightness for concrete was improved by an adequate addition of fluosilicate salt based inorganic compound.

• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.589-596
• /
• 2020

In an effort to find alternate, environment friendly and sustainable building materials, the scope of possible utilization of iron slag (I-sand), generated as a by-product in iron and steel industries, as fine aggregates in reinforced cement concrete (RCC) made with manufactured sand (M-sand) is examined in this manuscript. Systematic investigations of the physical, mechanical, microstructural and durability properties of I-sand in comparison with RCC made with M-sand have been carried out on various mix designs prepared by the partial/full replacement of I-sand in M-sand. The experimental results clearly indicate the possibility of utilizing iron slag for preparing RCC in constructions without compromising on the property of concrete, durability and performance. This provides an alternate possibility for the effective utilization of industrial waste, which is normally disposed by delivering to landfills, in building materials which can reduce the adverse environmental effects caused by indiscriminate sand mining being carried out to meet the growing demands from construction industry and also provide an economically viable alternative by reducing the cost of concrete production.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.17-28
• /
• 2001

The purposes of this study were to arrange and analyze the Oriental Mode in 20th century fashion and to clarify that Oriental dress and its ornaments appearing as the main subject of Occident fashion gradually The results were as follows : First, Oriental Mode in 1900-1950s was prescribed as the 'Orientalism' to be expressed Occidental imperialistic viewpoint. Therefore, the Orient was used as the simple recording mark of the imperialism product or commercial motive and it was reflected in fashion. Second, it was explained in 1960-1970s as the 'Folklore Orientalism' that focus was moved into the folklore costume of Orient. Third, in 1980s, 'Ethnic' was conspicuous that reflected the traditional costume in the area of non-christianity. Especially, it was the decade that the Middle East attracted attention. Fourth, Oriental Mode in 1990s appeared as the 'Fusion' that Oriental and Occidental elements were mixed and compromised on equal terms. Fifth, it was expressed as a word 'Zen' that had natural fiber, moderate color and silhouette to be most basic and concise about human body at the end of 1990s. This study could confirm that the center of fashion was being converted into the Orient gradually. This may be understood as the pluralistic culture phenomenon. Namely, eclectic principle to recognize mutual style and individualistic nature and to utilize and mix was made, and this brought the conversion into Oriental sense of value.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.215-216
• /
• 2012

Emissions of CO₂ occur during the production of cement manufacturing process. During the production of clinker, limestone is mainly calcium carbonate, is heated to produce lime and CO₂ as a by-product. It has a major problem, CO₂ uptake is not considered in concrete carbonation, just focus in CO₂ emission. This study is to develop a simulation model for CO₂ uptakes in concrete structures based on carbonation reduction coefficient considering finishing materials. CO₂ uptakes unit of concrete cubic meter is calculated by CO₂ emissions unit of concrete materials and usage of concrete materials in mix proportion. From the simulation result, CO₂ uptake ratios is 2.04 percent in carbonation models of concrete structure during 40 years.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.31-60
• /
• 1995

The distribution of economic activity over a mutually exclusive and exhaustive categorical industry-region matrix is modeled as a composition of two random components: the probability-like share distribution of jobs and the dynamic evolution of absolute aggregates. The former describes the individual activity location choice by comparing the predicted profitability of the current industry-region pair against that of all other alternatives based on the available information on industry-specific, region specific, or activity specific attributes. The latter describes the time evolution of macro-level aggregates using a dynamic reduced from model. With the seperation of micro choice behavior and macro dynamic aggregate constraint, the usual independence and identicality assumptions become consistent with the activity share distribution, hence multi-regional industrial migration can be represented by a set of probability evolution equations in a conservative Markovian from. We call this a Micro-Macro Composition Approach since the product of the aggregate prediction and the predicted activity share distribution gives the predicted activity distribution gives the predicted activity distribution which explicitly considers the underlying individual choice behavior. The model can be applied to interesting practical problems such as the plant location choice of multinational enterprise, the government industrial ploicy to attract international firms, and the optimal tax-transfer mix to influence activity location choice. We consider the latter as an example.

• Journal of Surface Science and Engineering
• /
• v.32 no.2
• /
• pp.165-171
• /
• 1999

The etching reaction of $UO_2$ in $CF_4/O_2$ gas plasma is examined as functions of $CF_4/O_2$ ratio, plasma power, and substrate temperature at up to $370^{\circ}C$ under the total pressure of 0.30 Torr. It is found that the highest etching rate is obtained at 20% $O_2$ mole fraction, regardless of r. f. power and substrate temperature. The existence of the optimum $CF_4/O_2$ ratio is confirmed by SEM, XPS and XRD analysis. The highest etching reaction rate at $370^{\circ}C$ under 150W exceeds 1000 monolayers/min., which is equivalent to 0.4$\mu\textrm{m}$/min. The mass spectrometry analysis results reveal that the major reaction product is uranium hexa-fluoride $UF_6$. Based on the experimental findings, dominant overall reaction of uranium dioxide in $CF_4/O_2$ plasma is determined : $8UO_2+12CF_4+3O_2=8UF_6+12CO_{2-x}$ where $CO_{2-x}$ represents the undetermined mix of $CO_2$ and CO.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.270-276
• /
• 2009

This paper outlines opportunities and challenges in the Implementation of BPEL based WFMS(Work Flow Management System) for the MES(Manufacturing Execution Systems) level in semiconductor manufacturing. At present, the most MES that are composed of several hundreds of applications in semiconductor wafer fabrication shop have the same problems as others about flexibility and adaptability. When a plant has to produce new product mix, remodel the manufacturing execution process, or replace obsolete equipments, the principal road blocks for responding to new manufacturing environment are inflexible communication infrastructure among the manufacturing process components and the difficulty in porting existing application software to new configurations. In this paper, the issues about BPEL standard, used for the flexibility of Workflow Management System, are presented. We introduce the integrated development framework named nanoFlow which is optimized for developing the BPEL based WFMS application for automated manufacturing system. We describe a WFMS implemented with using nanoFlow framework, review and evaluate the system in terms of flexibility and adaptability.

• IE interfaces
• /
• v.25 no.2
• /
• pp.264-275
• /
• 2012

The process of semiconductor(IC Package) manufacturing usually includes lots of complex and sequential processes. Many kinds of equipments are installed with the mixed concept of serial and parallel manufacturing system. The business environments of the semiconductor industry have been changed frequently, because new technologies are developed continuously. It is the main reason of new investment plan and layout consideration. However, it is difficult to change the layout after installation, because the major equipments are expensive and difficult to move. Furthermore, it is usually a multiple-objective problem. Thus, new investment or layout change should be carefully considered when the production environments likewise product mix and production quantity are changed. This paper introduces a simulation case study of a Korean company that produces packaging substrates(especially lead frames) and requires multi-objective decision support. $QUEST^{(R)}$ is used for simulation modelling and AHP(Analytic Hierarchy Process) and DEA(Data Envelopment Analysis) are used for weighting of qualitative performance measures and solving multiple-objective layout problem, respectively.