DOI QR코드

DOI QR Code

Assessment of concrete properties with iron slag as a fine aggregate replacement

  • Noufal, E. Rahmathulla (Department of Civil Engineering, Government Engineering College) ;
  • Kasthurba, A.K. (Department of Architecture and Planning, National Institute of Technology) ;
  • Sudhakumar, J. (Department of Civil Engineering, National Institute of Technology) ;
  • Manju, Unnikrishnan (CSIR-Institute of Minerals and Materials Technology)
  • Received : 2019.03.15
  • Accepted : 2020.05.29
  • Published : 2020.06.25

Abstract

In an effort to find alternate, environment friendly and sustainable building materials, the scope of possible utilization of iron slag (I-sand), generated as a by-product in iron and steel industries, as fine aggregates in reinforced cement concrete (RCC) made with manufactured sand (M-sand) is examined in this manuscript. Systematic investigations of the physical, mechanical, microstructural and durability properties of I-sand in comparison with RCC made with M-sand have been carried out on various mix designs prepared by the partial/full replacement of I-sand in M-sand. The experimental results clearly indicate the possibility of utilizing iron slag for preparing RCC in constructions without compromising on the property of concrete, durability and performance. This provides an alternate possibility for the effective utilization of industrial waste, which is normally disposed by delivering to landfills, in building materials which can reduce the adverse environmental effects caused by indiscriminate sand mining being carried out to meet the growing demands from construction industry and also provide an economically viable alternative by reducing the cost of concrete production.

Keywords

References

  1. Anil, M.K. and Pankaj, P.K. (2017), "Effect of steel slag as partial replacement of fine aggregate in M35 grade of concrete", Imperial J. Interdiscip. Res. (IJIR), 3(9), 2454-1362.
  2. ASTM C 1202-94, Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration.
  3. Chunlin, L., Kunpeng, Z. and Depeng, C. (2011), "Possibility of concrete prepared with steel slag as fine and coarse aggregates: A preliminary study", Procedia Eng., 24, 412-416. https://doi.org/10.1016/j.proeng.2011.11.2667.
  4. Diaz, M.M., Pabon, J.V., Martinez, S.R. and Orduz, L.Z. (2019), "Iron slag as fine aggregate replacement and nanosilica particles in self-compacting concrete mixtures", J. Phys.: Conf. Ser., 1386, 01203. https://doi.org/10.1088/1742-6596/1386/1/012032.
  5. IS: 10262-2009, Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standard, New Delhi, India.
  6. IS: 1199-1959, Methods of Sampling and Analysis of Concrete, Bureau of Indian Standard, New Delhi, India.
  7. IS: 12269-1987, Specification for 53 Grade Ordinary Portland Cement, Bureau of Indian Standard, New Delhi, India.
  8. IS: 2386 (part III)-1963, Methods of Test for Aggregates for Concrete, Part III-Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standard, New Delhi, India.
  9. IS: 383-1970, Specification for Coarse and Fine Aggregate from Natural Sources for Concrete, Bureau of Indian Standard, New Delhi, India.
  10. IS: 456-2000, Plain and Reinforced Concrete Code of Practice (Fourth Revision), Bureau of Indian Standard, New Delhi, India.
  11. IS: 516-1959, Methods of Sampling and Analysis of cConcrete, Bureau of Indian Standard, New Delhi, India.
  12. IS: 5816-1999, Splitting Tensile Strength of Concrete-Method of Test, Bureau of Indian Standard, New Delhi, India.
  13. Kim, K.H., Jeon, S.E., Kim, J.K. and Yang, S. (2003), "An experimental study on thermal conductivity of concrete", Cement Concrete Res., 33, 363-371. https://doi.org/10.1016/S0008-8846(02)00965-1.
  14. Li, B., Ke, G. and Zhou, M. (2011), "Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete", Constr. Build. Mater., 25, 3849-3853. https://doi.org/10.1016/j.conbuildmat.2011.04.004.
  15. Manju, U. (2016), "I-sand: An environment friendly alternative to river sand in reinforced cement concrete constructions", Constr. Build. Mater., 125, 1152-1157. https://doi.org/10.1016/j.conbuildmat.2016.08.130.
  16. Oner, A. and Akyuz, S. (2007), "An experimental study on optimum usage of GGBS for the compressive strength of concrete", Cement Concrete Compos., 29, 507-514. https://doi.org/10.1016/j.cemconcomp.2007.01.001.
  17. Ouda, A.S. and Abdel-Gawwad, H.A. (2017), "The effect of replacing sand by iron slag on physical, mechanical and radiological properties of cement mortar", HBRC J., 13, 255-261. https://doi.org/10.1016/j.hbrcj.2015.06.005.
  18. Patra, R.K. and Mukharjee, B.B. (2016), "Fresh and hardened properties of concrete incorporating ground granulated blast furnace slag-A review", Adv. Concrete Constr., 4(4), 283-303. https://doi.org/10.12989/acc.2017.4.4.283.
  19. Patra, R.K. and Mukharjee, B.B. (2017), "Properties of concrete incorporating granulated blast furnace slag as fine aggregate", Adv. Concrete Constr., 5(5), 437-450. https://doi.org/10.12989/acc.2017.5.5.437.
  20. Prusty, R., Mukharjee, B.B. and Barai, V.S. (2015), "Nano-engineered concrete using recycled aggregates and nano-silica: Taguchi approach", Adv. Concrete Constr., 3(4), 253-268. https://doi.org/10.12989/acc.2015.3.4.253.
  21. Raharjo, D. and Subakti, A. (2013), "Mixed concrete optimization using fly ash, silica fume and iron slag on the SCC's compressive strength", Procedia Eng., 54, 827-839. https://doi.org/10.1016/j.proeng.2013.03.076.
  22. Singh, G. and Siddique, R. (2016), "Effect of iron slag as partial replacement of fine aggregates on the durability characteristics of self-compacting concrete", Constr. Build. Mater., 128, 88-95. https://doi.org/10.1016/j.conbuildmat.2016.10.074.
  23. Yi, H., Xu, G., Cheng, H., Wang, J., Wan, Y. and Chen, H. (2012), "An overview of utilization of steel slag", Procedia Environ. Sci., 16, 791-801. https://doi.org/10.1016/j.proenv.2012.10.108.