• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.32-39
• /
• 2014

In general, non-directional LED lamps including high transmittance cover are more advantageous than directional LED lamps, which are efficient enough to improve luminous efficacy and obtain certification, allowing wide manufacture, sale, and distribution. Although KS C 7651(Self-ballasted LED lamps-Safety and performance requirements) was revised in July 2013, however, many companies are having a lot of difficulties in keeping the certification and product development for the lack of the photometric analysis for non-directional LED lamps. In this paper, through the measurement of the angular distribution of luminous flux of incandescent lamp and non-directional LED lamps, we examined the reasonability of non-directional LED lamps' standards as suggested in KS C 7651. According to the results, even if non-directional LED lamps satisfy KS C 7651, when compared to an incandescent lamp, they showed less diffusive than the incandescent lamp and the distribution of the luminous flux depending on the angle fluctuated greatly even among LED lamps. Judging by the result, the current standard of the non-directional LED lamps, KS C 7651, has been comprehended that the angular distribution of the luminous flux needs to be presented after being much more thoroughly standardized.

• Korean Management Science Review
• /
• v.32 no.3
• /
• pp.1-12
• /
• 2015

This study aims to analyze the efficiency of the government policy of Nanotechnology which is expected to minimize nanotechnology's potential risk, using the methodology of conjoint analysis and market share analysis. The attributes of conjoint analysis were divided into potential risk factor and the policy factor. It was found that the policy factor could alleviate the potential risk, subsequently increasing consumers' utility. Additionally, the government certification was more powerful than the mandatory labelling. The market share also increased in result of the nanotechnology-applied product with the certification or labeling either. The result of this study can be used as a reference to related policy makers in the fields of Nanotechnology.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.3
• /
• pp.9-14
• /
• 2013

Continuous airworthiness system is comprised of regulations and procedures to assure the safety and reliability through the total stage of development, certification and operation of aircraft. The purpose of this system is not only to provide the guidelines that should be kept by manufacturers and operators, but also to evaluate the maintenance capability in every activity of safety related procedures. During the development process of the mid and large size aircraft, operational experience should be reflected systematically for a safer and more reliable product by using the meaningful data base from operation. The relationship of safety roles between manufacturer and operator is mutually complementary, and the roles of each function have an influence to the next step. Overall structure of the procedure contains the concept of continuous analysis and feedback to achieve highest degree of safety and reliability during the entire life of aircraft. Finally, this paper describes how the feedback is made and used for aircraft design from operational experience under the continuous analysis and surveillance system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.203-211
• /
• 2009

In the area of the telecommunication industry, a few products have been developed before related technical regulation has been made. Government agency is forced to make a final decision on whether a requested product is sellable in the market only after the structure and function of requested product is tested. The introduction of a 'SDoC', and 'privatization of technical regulation' to our legal system could be a solution for minimizing the situation mentioned above. Both 'SDoC' and 'privatization of technical regulation' are systems which are capable of minimizing the appearance of products without technical regulations. Furthermore, 'Temporary approval system' would provide a government agency with administrative procedure for new product without technical regulation.

• The Korean Journal of Food & Health Convergence
• /
• v.9 no.2
• /
• pp.7-18
• /
• 2023

Through these research results, I would like to present some implications for promoting and revitalizing local food sales in Daejeon and establishing a local food system. First, in terms of local food direct stores, when establishing a local food store, location conditions should be considered. If the location cannot be changed, the quality of agricultural products should be improved to improve consumer satisfaction and purchase intention so that consumers can directly feel the value of the product. Second, efforts at the local government level are needed to improve the stability of local food. There are still many consumers who are not properly aware of local food. It is necessary to improve consumers' interest in the value of local food by providing education including social and environmental information on the production and distribution process of local food. Third, policy efforts on local food are needed. It is necessary to introduce and reorganize the local food certification system to emphasize the stability of local food to consumers and form trust. Finally, for the continuous development of local food, research on the satisfaction and purchase intention of local food consumers must be continuously conducted.

• The Research Journal of the Costume Culture
• /
• v.32 no.1
• /
• pp.86-107
• /
• 2024

Although interest in eco-friendly fashion products is increasing among scholars and industry leaders, the concept of eco-friendly products remains unclear, preventing consistent assessment of which fashion products are eco-friendly. This study conducted a content analysis of eco-friendly product information from 87 domestic and 102 foreign brands to reveal key standards for categorizing eco-friendly fashion products. Product characteristic information was coded according to the four material-based standards (i.e., organic material, regenerative material, alternative material, and sustainably produced/upcycled material). Consistency between coders was confirmed by Cohen's kappa. In results, eco-friendly fashion products are categorized by four material-based standards and two certification standards (i.e., certified, not certified). Among the four material-based categories, the greatest number of domestic and foreign companies produced eco-friendly products that were classified as the regenerative material group. In addition, companies acquired eco-friendly certifications related to the use of organic, regenerative, and alternative materials. The greatest number of eco-friendly material brands used for eco-friendly fashion products belonged to the regenerative material group. Based on the study results, a typology of eco-friendly products was suggested. This typology can benefit practitioners and academics by highlighting a need for classification system for the eco-friendly fashion products, as well as by providing insight into the categorization of eco-friendly fashion products.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.137-148
• /
• 2022

Recently, in the concrete industry, the development and commercialization of low-carbon products of ready-mixed concrete have emerged as part of the efforts to realize carbon neutrality. This study aims to investigate the current status of environmental product declaration(EPD) of ready-mixed concrete and to analyze the characteristics of carbon emissions by compressive strength, life cycle stage, and region. To this end, the related certification system requiring the calculation of carbon emissions in the concrete industry was analyzed. The target of analyzing the current status of carbon emissions was set as a product of ready-mixed concrete that acquired EPD certification based on the life cycle assessment method. In addition, the trend of carbon emissions according to each characteristic was reviewed by analyzing carbon emissions by the life cycle of ready-mixed concrete products, analyzing carbon emissions by standard, and analyzing carbon emissions by region. As a result, the carbon emissions in the pre-production stage were 99% compared to total carbon emissions., and as it increased from 18MPa to 40MPa, carbon emissions also increased. Even with the same specifications, the carbon emissions in the capital region were higher than in the southern region.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.172-182
• /
• 2013

In this study we consider a flow line CONWIP system in which two types of product are produced. The processing times of each product type at each station follow an independent exponential distribution and the demands for the finished products of each type arrive according to a Poisson process. The demands that are not satisfied instantaneously are either backordered or lost according to the number of unsatisfied demands that exist at their arrival instants. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts of each product type at each station, mean waiting times of backordered demands and the proportion of backordered demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a two class closed queueing network with a synchronization station and analyze the closed queueing network using a product-form approximation method for multiple classes developed by Baynat and Dallery. In the approximation method, each subsystem is analyzed using a matrix geometric method. Comparisons with simulation show that the approximation method provides fairly good results for all performance measures.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.369-381
• /
• 2011

Ginseng in Korea has not only the big production value but also till a good reputation from overseas in the name of 'Korea Ginseng'. Having spread rapidly nationwide from 2000 year, its production keeps on increasing but its consumption becomes lazy and its price is also falling down because of comsumer's concern about mainly overusing pesticide for ginseng. In order to cope with this problem, the government introduced the GAP certification system to ginseng in 2006 to reflect consumer's needs for food safety. This system will be a good opportunity to promote ginseng consumption dramatically. In this aspect it is very important to know how well this system is established and how ginseng farmers build marketing strategies to draw new wind in the market. This study was carried out to look over the GAP certified ginseng system and show its marketing strategies using 4P's(product, place, promotion and price). The main results are as follows. GAP ginseng system currently has some weaknesses such as lack of systematic certification management and after-service, nonrealistic certification fee and poor linkage from production to consumption. In the marketing mix strategies, product strategy suggests that the most desirable appearance be transplanted ginseng filled with branch roots and 4 to 5 year-ginseng, and it is necessary to choose multi-brand strategy divided for present into for self-sufficiency and family brand strategy by use if its brand enlarges to processed products in the future. In the place strategy, 3 stages like 'producer group' - 'GAP certified facility' - 'sales shop' are based as the physical marketing channel according to traceability, and connected with giant retail market and environment friendly stand, and if its sales volume enlarges, it should be considered the GAP ginseng specialized marketplace which is a type of chain store. In the promotion strategy, the promotion of government level is necessary at first and producer alliances require the promotion targeting at the group of women under 40 with differentiation from price, quality, and safety. In the price strategy, the early stage-high price strategy which sets 20~25% higher for self-sufficiency and 30~35% for present is desirable.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.408-422
• /
• 2021

In this study, the relationship between trust and purchase intention, which is an outcome variable, was empirically verified by discovering the trust-forming factors of anti-aging products and developing measurement variables. In addition to the existing trust-forming factors such as perceived quality, perceived reputation, brand recognition, and customization, a newly discovered factor is 'accredited certification'. Since the anti-aging industry in Korea is an industry that directly affects consumer health, it was determined that the existing trust-forming factors had limitations in building consumer trust, and a new measure was discovered. This study conducted a survey on anti-aging product consumers and analyzed the solidity and relationship of the questions. As a result of the analysis, it was found that perceived quality, brand recognition, customization, and accredited certification among the anti-aging product trust-forming factors had a positive (+) effect on trust, and perceived reputation had a negative (-) effect on trust. appeared to affect It was found that there was a positive (+) effect between trust and purchase intention, which are the trailing variables. This study proved the meaningful relationship between trust-forming factors and trust by strategically developing and empirically and practically examining meaningful and effective trust-forming factors and measurement items. At the same time, this study is expected to significantly contribute to the establishment of marketing strategies related to anti-aging products in the future by discovering key factors for forming trust that are important for marketing in the anti-aging industry.