• 수산경영론집
• /
• 제49권1호
• /
• pp.37-50
• /
• 2018

The purpoose of this paper is to analyze the relative effciency of dreid laver processing companies in Korea and provide the development direction and improvement plan for the dried laver industry. Data on 76 dried laver processing companies were selected as the subjects for Dea. As a result of Dea, the average efficiency rate is shown that the technical efficiency is 84.90%, the pure technical efficiency is 93.83%, and the scale efficiency is 86.65%. and based on BCC results 38 companies are relatively efficient. comparing pure technical efficiency and scale efficiency, it showed that inefficiencies caused by scale of the company was greater than inefficiencies caused by the scale of technical matter. It implies that expanding the size is essential for achieving high-efficiency of dried laver processing company. In the inefficiency factor analysis, the result reveals that unstable supply of raw materials, quality management, capital flexibility and distribution ability influence the efficiency of laver processing company.

• 생명과학회지
• /
• 제5권3호
• /
• pp.126-136
• /
• 1995

The studies had been conducted to evaluate the grain processing effects for ruminants on starch digestion, body weight gain and feed efficiency since 1970. This research deals with experimental results on chemical structure, gelatinization, microbial starch digestion in rumen, intestinal starch digestion in rumen, roles of protozoa, intestinal starch digestion of bypass starch, limits to starch digestion in small intestine. The grain processing has different effects on digestion, weight gain and feed efficiency when different grain sources and contents is used, and the quality and quantity of roughage is different. The economical and efficient method of grain processing should be selected considering weight gain and feed efficiency enhancement than digestibility.

• ETRI Journal
• /
• 제36권3호
• /
• pp.506-509
• /
• 2014

This paper studies the energy efficiency power allocation for cognitive radio networks based on uplink orthogonal frequency-division multiplexing. The power allocation problem is intended to minimize the maximum energy efficiency measured by "Joule per bit" metric, under total power constraint and robust aggregate mutual interference power constraint. However, the above problem is non-convex. To make it solvable, an equivalent convex optimization problem is derived that can be solved by general fractional programming. Then, a robust energy efficiency power allocation scheme is presented. Simulation results corroborate the effectiveness of the proposed methods.

• 소성∙가공
• /
• 제7권5호
• /
• pp.450-458
• /
• 1998

The high temperature deformation behavior of Al 5083 alloy has been studied in the temperature range of 350 to 520 ${\circ}C$ and strain rate range of 0.2 to 3.0/sec by torsion test. The strain rate sensitivity(m) of the material was evaluated and used for estabilishing power dissipation maps following the dynamic material model. These maps show the variation of efficiency of power dissipation(${\eta}$=2m/(2m+1)) with temperature and strain rate. Hot restoration of dynamic recrystallization (DRX) was analyzed from the flow curve, deformed microstructure, and processing maps during hot deformation. Also, the effect of deformation strain on the efficiency of power dissipation of the alloy was analysed using the processing maps. Moreover relationship between the hot-ductility and efficiency of power dissipation of the alloy depending on thmperature and strain rate was studied using the Zener-Hollomon parameter(Z=${\varepsilon}$exp(Q/RT) It is found that the maximum efficiency of power dissipation for DRX in Al 5083 alloy is about 74.6 pct at the strain of 0.2. The strain rate and temperature at which the efficiency peak occurred in the DRX domain is found to be ∼0.1/sec and ∼450${\circ}C$ respectively.

• ETRI Journal
• /
• 제36권4호
• /
• pp.686-689
• /
• 2014

This paper studies energy-efficiency (EE) power allocation for cognitive radio MIMO-OFDM systems. Our aim is to minimize energy efficiency, measured by "Joule per bit" metric, while maintaining the minimal rate requirement of a secondary user under a total power constraint and mutual interference power constraints. However, since the formulated EE problem in this paper is non-convex, it is difficult to solve directly in general. To make it solvable, firstly we transform the original problem into an equivalent convex optimization problem via fractional programming. Then, the equivalent convex optimization problem is solved by a sequential quadratic programming algorithm. Finally, a new iterative energy-efficiency power allocation algorithm is presented. Numerical results show that the proposed method can obtain better EE performance than the maximizing capacity algorithm.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.82-88
• /
• 2015

The magnetron, a vacuum tube, is currently the usual high-power microwave power source used for microwave heating. However, the oscillating frequency and output power are unstable and noisy due to the low quality of the high-voltage power supply and low Q of the oscillation circuit. A heating system with enhanced reliability and the capability for control of chemical reactions is desired, because microwave absorption efficiency differs greatly depending on the object being heated. Recent studies on microwave high-efficiency power amplifiers have used harmonic processing techniques, such as class-F and inverse class-F. The present study describes a high-efficiency 100 W GaN-HEMT amplifier that uses a harmonic processing technique that shapes the current and voltage waveforms to improve efficiency. The fabricated GaN power amplifier obtained an output power of 50.4 dBm, a drain efficiency of 72.9%, and a power added efficiency (PAE) of 64.0% at 2.45 GHz for continuous wave operation. A prototype microwave heating system was also developed using this GaN power amplifier. Microwaves totaling 400 W are fed from patch antennas mounted on the top and bottom of the microwave chamber. Preliminary heating experiments with this system have just been initiated.

• 수산경영론집
• /
• 제52권3호
• /
• pp.15-25
• /
• 2021

Base on the survey and financial statement on fish-paste processing company, this study aimed to estimate management efficiencies of fish-paste processing management using a data envelopment-analysis (DEA), In-depth interview and to find out their determinants. Model results show that the estimated mean management efficiencies obtained for the VRS and CRS DEA are 83.7% and 89.1%. In-depth interview results also show that efficiencies caused by scale of technical matter was greater than efficiencies caused by the scale of the company. Thus it implies that technical development is essential for achieving high-efficiency of fish-paste processing company more than expanding the size of company.

• 정보처리학회논문지A
• /
• 제19A권3호
• /
• pp.121-128
• /
• 2012

본 논문은 다양한 해상도에서의 초음파 영상 처리를 위한 최적의 프로세싱 엘리먼트 구조를 제안한다. 이를 위해 본 논문에서는 각 프로세싱 엘리먼트(processing element, PE)당 처리되는 영상 데이터(data-per-processing element, DPE) 수를 변화시키는 실험을 통해 시스템의 성능(system performance), 에너지 효율(energy efficiency), 면적 효율(area efficiency)을 각각 측정하고, 측정된 결과를 바탕으로 최적의 매니코어 프로세서 구조를 선택하였다. 모의실험 결과, 에너지 효율은 $256{\times}256$, $768{\times}1,024$, $1,024{\times}1,280$ 해상도를 갖는 영상에서 PE 개수가 각각 1,024개, 4,096개, 16,384개일 때 가장 높았다. 또한 면적 효율은 $256{\times}256$ 해상도의 영상에서는 PE 개수가 256개, $768{\times}1,024$와 $1,024{\times}1,280$ 해상도의 영상에서는 4,096개에서 가장 높은 효율을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1074-1086
• /
• 2015

We Relay-assisted cellular network architecture has been developed to cover cell-edge users and to improve capacity. However, the deployment of relay stations (RSs) in cellular networks may increase the total energy consumption. Though energy efficiency has become a major concern in cellular networks, little work has studied the energy efficiency of relay-assisted cellular networks by sleep scheduling. In this paper, a distributed base stations (BSs) sleep scheduling scheme in relay-assisted cellular networks is proposed. The goal is to maximize the energy efficiency under the spectral efficiency constraint. Firstly, whether the BSs should be sleeping or active is determined by the traffic profile. Then, the transmission powers of the active BSs are optimized within the game-theoretic framework, by using an interior-point method, so as to maximize the energy efficiency. Simulation results demonstrate that the effectiveness of the proposed scheme is superior to that turning on all the BSs without sleep scheduling.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.200-211
• /
• 2017

Conventional boost-full-bridge and boost-hybrid-bridge two-stage inverters are widely applied in order to adapt to the wide dc input voltage range of photovoltaic arrays. However, the efficiency of the conventional topology is not fully optimized because additional switching losses are generated in the voltage conversion so that the input voltage rises and then falls. Moreover, the electrolytic capacitors in a dc-link lead to a larger volume combined with increases in both weight and cost. This paper proposes a higher efficiency inverter with time-sharing synchronous modulation. The energy transmission paths, wheeling branches and switching losses for the high-frequency switches are optimized so that the overall efficiency is greatly improved. In this paper, a contrastive analysis of the component losses for the conventional and proposed inverter topologies is carried out in MATLAB. Finally, the high-efficiency under different switching frequencies and different input voltages is verified by a 3 kW prototype.