• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.169-178
• /
• 1996

Target parameters such as water solubility index (WSI), intrinsic viscosity (IV), water holding capacity (WHC), oil holding capacity (OHC), soluble dietary fiber (SDF) and microstructure were investigated on three different screw configurations during twin-screw extrusion of wheat bran. WSI of raw wheat bran (RWB) was 13.7%, while that of extrudates ranged $16.3{\sim}23.2%$ when extruded using screw configurations with 5 reverse screw elements (RSE). It was found that the moisture content of RWB greatly affected WSI of extrudates. IV of wheat bran extrudates increased from 10.6 ml/g of RWB to $37.86{\sim}44.37\;ml/g$ of extrudates extruded using 3, 4 and 5 RSE, whose trend was highly related to the moisture content of RWB and the extrusion pressure. Multiplication of IV and soluble solid (SS) content exhibited good correlation $(R^2=0.85)$ with specific mechanical energy (SME). The results suggested that SS and molecular size are an important factor governed by the SME in solubilization of wheat bran. WHC increased with increasing feed rate and moisture content, while OHC decreased. SDF increased from 2.68% of RWB to $4.32{\sim}6.48%$ of extruded wheat bran, indicating the significant breakdown of cell wall components. Microstructure of the extrudates showed the distinct patterns of degradation and solubilization of cell wall structure, depending on the moisture content of RWB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.736-741
• /
• 2017

This paper examines the design for improving the wiper system of rotorcraft. During rotorcraft operation, the wiping performance and excessive clearance can decrease. The wiper system consists of a wiper arm assembly, motor, convertor and flex drive. If there is a problem with the wiper system, the operation ability decreases because the operation is restricted in a rainy environment. There are two main causes of the problem of the wiper system: the lifting forces acting on the wiper arm in aircraft flight and the excessive gap of the components. To remedy these two problems, the wiper arm was improved. The improvements included increased contact pressure on the wiper arm (spring tension), improved gear clearance, and material and shape changes. Durability test, aircraft ground test and flight test were carried out to verify the improved shape, and it was confirmed that the wiping performance and clearance problems were solved. Currently, the rotorcraft is operated without problem by applying the improved shape, and this design improvement process will be a useful reference for future rotorcraft development.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.256-262
• /
• 2012

This study investigated the hydrogen storage properties of Zr-Based $AB_{2-x}M_x$ metal hybride made by HCS (Hydriding Combustion Synthesis). The materials were prepared by HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm, HCS 80 wt% $AB_2$-20 wt% Mg and pure Zr-Based $AB_2$, These materials were activated at 298 K under 20 bar. Both HCS 80 wt% $AB_2$-20 wt% Mg and HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm were absorbed within 1 minute. In the case of the $AB_2$, it was perfectly absorbed within 6 minutes. Then, the materials were evaluated to obtain P-C-T (Pressure-Composition-Temperature) curves at 298K. As a result, the hydrogen storage capacity of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were determined to be 1.2, 1.6 and 1.74 wt%, respectively. The activation energy and rate controlling step were calculated by the Johnson-Mehl Avrami equation. The activation energies of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were 26.91, 20.45, and 60.41 kJ/mol, respectively. Also, the values of ${\eta}$ in the Johnson-Mehl Avrami equation for HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ are 0.60, 0.51, and 0.44. So, the rate controlling steps which indicate hydrogen storage mechanism are an one dimensional diffusion process.

• Korean Journal of Social Welfare Studies
• /
• no.36
• /
• pp.203-225
• /
• 2008

The purpose of this study is to examine how much the external locus of control, social support, self-esteem, and adoption decision making process influence to teen parents' grief and find out the differences depending on meeting the baby, breast-feeding, anticipating the meeting the baby, ceremony for separation, and exposing their grief by themself or to others. Data was analysed with multiple regression and t-test. With the result of multiple regression analysis, the higher external locus of control, pressure of birthfather, regrets for adoption decision are, the higher grief is, and the lower support of friends and self-esteem are, the higher grief is. And It is estimated high grief statically among the group of breast-feeding, anticipating the baby, no ceremony for separation. But the group exposing their grief by self or to others felt low grief. On the basis of the results, we will find out the meaningful contents for intervention. The staffs of birthmother shelter and social worker don't overlooking the relationship between birthmother and birthfather and enforce the internal locus of control, self-esteem. Above all we will intervene about exploring the adoption decision making and facilitate the exposure of feeling related to surrendered baby(guilt, anxiety, sadness, shame, fear).

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.365-373
• /
• 2017

This study proposes a newly developed dry washing method for removing pollutants such as total petroleum hydrocarbon (TPH) and oxidized iron from the surface of ballast gravel. A batch-type dry washing method showed a good performance in a previous study. In this study, a continuous-type dry washing system, instead of a batch-type system, was prepared to improve the efficiency of the system. A drier and a separator were also applied to this system as pre-treatment process, and the performance of this system was evaluated. In this experiment, blasting media was blasted on the polluted gravels through 12 nozzles by a pressure of $5-6kg/cm^2$ for 20-30 mins to remove TPH and oxidized iron. It was found to be possible to remove 80-90% of TPH and oxidized iron by using this system. Several ways to improve the performance were suggested in this study.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.417-428
• /
• 2021

The combustion characteristics of anthracite, which follow a complex process with low reactivity, must be considered through the dynamic behavior of circulating fluidized bed (CFB) boilers. In this study, computational fluid dynamics (CFD) simulation was performed to analyze the combustion characteristics of anthracite in a pilot scale 0.1 MW_th Oxy-fuel circulating fluidized bed (Oxy-CFB) boiler. The 0.1MW_th Oxy-CFB boiler is composed of combustor (0.15 m l.D., 10 m High), cyclone, return leg, and so on. To perform CFD analysis, a 3D simulation model reactor was designed and used. The anthracite used in the experiment has an average particle size of 1,070 ㎛ and a density of 2,326 kg/m³. The flow pattern of gas-solids inside the reactor according to the change of combustion environment from air combustion to oxygen combustion was investigated. At this time, it was found that the temperature distribution in air combustion and oxygen combustion showed a similar pattern, but the pressure distribution was lower in oxygen combustion. addition, since it has a higher CO₂ concentration in oxygen combustion than in air combustion, it can be expected that carbon dioxide capture will take place actively. As a result, it was confirmed that this study can contribute to the optimized design and operation of a circulating fluidized bed reactor using anthracite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.609-622
• /
• 2019

When the surfactant is dissolved in an aqueous solution, it forms aggregate called micelles (<20 nm) in the solution, and micelles can form the solubilized formulation by supporting the active ingredient therein. Swollen micelles are formulations capable of carrying larger amounts of active ingredient than conventional solubilized formulations at 50~100 nm. Unlike liposomes or nanoemulsions, which require a separate process such as high pressure emulsification, Swollen micelle is a more efficient method of solubilization and particle formation from a productive point of view. In this study, stabilization experiments on swollen micelle formulations were carried out using poloxamer 407, and then optimized formulation experiments for tocopheryl acetate components were performed using Response Surface Methodology (RSM). Tocopheryl acetate, a surfactant that affects solubilization and an active substance, were set as a factor and the correlation between them was confirmed. As the evaluation method, stability and particle size distribution and size were confirmed by temperature and time, and the structure and shape of the swollen micelle carrying the active ingredient were confirmed by FIB. These results show that poloxamer 407 0.500%, octyldodeceth-16 0.387% and tocopheryl acetate 0.945% are the most optimized prescriptions for swollen micelle stabilized with tocopheryl acetate.

• Journal of International Area Studies (JIAS)
• /
• v.22 no.2
• /
• pp.305-330
• /
• 2018

The purpose of this article is to examine whether Myanmar's experience in which dealing with the most exemplary change among rogue states or pariah state in the 21st century is feasible for North Korea's case. Recently, North Korea's willingness to dialogue, reform and open is similar to the precedent in which the Myanmar military junta dismantled its ruling system and turned over transition period through general elections in 2010 and 2015 each. The so-called 'Myanmar Model' refers to a country branded as a rogue state which has been under the international sanctions and pressure, and opening its political system and the market by choosing transformation. However, rapid changes in speed across the entire society after opening up are impossible because the political elite is only the leading role and implementation in the transition. In case of Myanmar, military culture has penetrated into society due to such a long-lasting military dictatorship, and even democratic bloc has become accustomed to authoritarian decision-making process. Furthermore, the "reserved area" of the old regime still exists in a deformed political structure that can not retrieve the interests of the military. Therefore there could not be achieved political development in term of qualification. North Korea also appears unlikely to achieve political and economic assessment in a short period of time, as civil society has not appeared due to its long dictatorship and very low economic development levels. Like Myanmar, North Korea is also likely to control the pace and direction of upcoming reforms and open, as the dictator or most powerful person chose to reform and open up. Therefore, if North Korea moves toward the 'Myanmar Model', there will be high expectations of new changes in the short term, but it could be delayed or stalled in the mid and long term.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.21-31
• /
• 2018

Bucket foundations are widely used in offshore areas due to their various benefits such as easy and fast installations. A bucket is installed using self-weight and the hydraulic pressure difference across the lid generated by pumping out water from inside the bucket. When buckets are installed in high permeable soil such as sands, upward seepage flow occurs around the bucket tip and interior, leading to a decrease in the effective stress in the soil inside the buckets. This process reduces the penetration resistance of buckets. However, the soil inside and outside the bucket can be disturbed due to the upward seepage flow and this can change the soil properties around the bucket. Moreover, upward seepage flow can create significant soil plug heave, thereby hindering the penetration of the bucket to the target depth. Despite of these problems, soil disturbance and soil plug heave created by suction installation are not well understood. This study aims to investigate the behavior of soil during suction installation. To comprehend the phenomena of soil plug heave during installation, a series of small-scale model tests were conducted with different testing conditions. From a series of tests, the effects of tip thickness of bucket, penetration rate, and self-weight were identified. Finally, soil properties inside the bucket after installation were approximated from the measured soil plug heave.