• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.449-456
• /
• 2003

Multi-step induction heating process was applied to the powder compact melting technique as a new heating process to achieve pinpoint accuracy, faster cycle time, repeatability, non-contact and energy-efficient heat in a minimal amount of time. The objective of this study is the establishment of the input data diagram of multi step induction heating process for automation of the fabrication process of 6061 Al foams with desired density. At first, proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of specimen. By using this coil, foaming experiments were performed to investigate the multi-step induction heating conditions such as capacity, temperature and time conditions of each heating and holding step. On the basis of the obtained multi-step induction heating conditions, relationship between final heating temperature and fraction of porosity was investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.547-553
• /
• 2008

Multi Progress Planning System problem in a multi-stage manufacturing system have a complexity and peculiarity different from other kinds of production system. World leading company has invested much cost and effort into a Real-Time Planning System and intelligent manufacturing field to obtain their own competitiveness. Especially Real-Time Planning System for ship production process as a part of intelligence for a shipyard. Real-Time Planning System, simulation based system, or virtual manufacturing system is an approach to achieve a such goal. It is expected that the Real-Time Planning System will contribute to the improvement of the productivity in working process at a shipyard. Also, This Real-Time Planning System will optimize the entire shipbuilding process in a multi progress planning environment for the delivery.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.93-97
• /
• 2009

We analyzed voltage characteristics of toner particle type display according to particle layers and cell gap between two electrodes and ascertained the aging effects by measuring the response time of particles with and without aging process. The threshold/driving/breakdown voltage is proportional to layers of toner particles and cell gap and the response time at driving voltage is faster than that of threshold and breakdown voltage because of different q/m of color and black particles. The analysis of response time is a method of estimation of optical characteristics, driving voltage and particle lumping and these results are promoted by aging process. We use the laser and photodiode to measure response time and optical properties. It has not been studied and reported to analyze the relationship of response time, threshold/driving/breakdown voltage, lumping phenomena, cell gap, and aging process for toner particle type display.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.436-441
• /
• 2004

Knowing the time of the process change could lead to quicker identification of the responsible special cause and less process down time, and it could help to reduce the probability of incorrectly identifying the special cause. In this paper, we propose a generalized maximum likelihood estimate. (MLE) of the process change point when a control chart with variable sample size (VSS) scheme signals a change in the process mean, and evaluate the performance of this estimator when it mi used with a VSS EWMA chart.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.05a
• /
• pp.191-196
• /
• 2005

Knowing the time of the process change could lead to quicker identification of the responsible special cause and less process down time, and it could help to reduce the probability of incorrectly identifying the special cause. In this paper, we propose a MLE of the process change point when control charts with the fixed sampling rate (FSR) scheme or the variable sampling rate (VSR) scheme monitor a process to detect changes in the process mean and/or variance of a normal quality variable.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2164-2168
• /
• 2003

Real time control system such as in factory automation fields, defense field, aerospace, railway industries, financial trading and so forth, includes multiple computers on multiple nodes, and share data to process various actions and functions. This is similar to multitasking in a multiprocessor computer system. The task processing efficiency of such system is proportionally increased by process speed of each process computer. And also it is greatly influenced by communication latencies of each node. To provide proper operation of such real time system, a network that can guarantee deterministic exchange of certain amount of data within a limited time is required. Such network is called as a real time network. As for modern distributed control system, the timeliness of data exchange gives important factor for the dynamics of entire control system. In a real time network system, exchanged data are determined by off-line design process to provide the timeliness of data. In other word, designer of network makes up a network data table that describes the specification of data exchanged between control equipments. And by this off-line design result, the network data are exchanged by predetermined schedule. First, this paper explains international standard real time network TCN (Train Communication Network) applied to the KHST (Korean High Speed Train) project. And then it explains the computer program developed for design tool of network data table of TCN.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.1-12
• /
• 2017

Many stochastic processes satisfy the Markov property exactly or at least approximately. An interested property in the Markov process is the first passage time. Since the sequential analysis by Wald, the approximation of the first passage time has been studied extensively. The Statistical computing technique due to the development of high-speed computers made it possible to calculate the values of the properties close to the true ones. This article introduces an exponentially weighted moving average (EWMA) control chart as an example of the Markov process, and studied how to calculate the average run length with problematic issues that should be cautioned for correct calculation. The results derived for approximation of the first passage time in this research can be applied to any of the Markov processes. Especially the approximation of the continuous time Markov process to the discrete time Markov chain is useful for the studies of the properties of the stochastic process and makes computational approaches easy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.859-870
• /
• 2011

The purpose of this paper is to develop reliability analysis procedures for repairable systems with interval failure time data and apply the procedures for assessing the storage reliability of a subsystem of a certain type of guided missile. In the procedures, the interval failure time data are converted to pseudo failure times using the uniform random generation method, mid-point method or equispaced intervals method. Then, such analytic trend tests as Laplace, Lewis-Robinson, Pair-wise Comparison Nonparametric tests are used to determine whether the failure process follows a renewal or non-renewal process. Monte Carlo simulation experiments are conducted to compare the three conversion methods in terms of the statistical performance for each trend test when the underlying process is homogeneous Poisson, renewal, or non-homogeneous Poisson. The simulation results show that the uniform random generation method is best among the three. These results are applied to actual field data collected for a subsystem of a certain type of guided missile to identify its failure process and to estimate its mean time to failure and annual mean repair cost.

• The Journal of Society for e-Business Studies
• /
• v.17 no.2
• /
• pp.149-163
• /
• 2012

Logistics systems provide their service to customers by coordinating the resources with limited capacity throughout the underlying processes involved to each other. To maintain the high level of service under such complicated condition, it is essential to carry out the real-time monitoring and continuous management of logistics processes. In this study, we propose a method of estimating the service completion time of key processes based on process-state information collected in real time. We first identify the factors that influence the process completion time by modeling and analyzing an influence diagram, and then suggest algorithms for quantifying the factors. We suppose the container terminal logistics and the process of discharging and loading containers to a vessel. The remaining service time of a vessel is estimated using a decision tree which is the result of machine-learning using historical data. We validated the estimation model using container terminal simulation. The proposed model is expected to improve competitiveness of logistics systems by forecasting service completion in real time, as well as to prevent the waste of resources.

• The Journal of Bigdata
• /
• v.3 no.1
• /
• pp.47-54
• /
• 2018

Previous studies of business process analysis have analyzed various factors such as task, customer service, operator convenience, and execution time prediction. To accurately analyze these factors, it is effective to utilize actual historical data recorded in information systems. Process mining is a technique for analyzing various elements of a business process from event log data. In this case study, process mining was applied to the transaction data of a purchase agency to analyze the business process of their procurement process, the execution time, and the operators.