• Computers and Concrete
• /
• v.22 no.3
• /
• pp.327-336
• /
• 2018

Increase in population and its daily increasing in our today society results in an increase in housing demand while traditional methods are not applicable. The project preparation and realization processes, based on theoretical and empirical studies, a creation of goods, services, and technologies, are the most important human activities. Selection of effective technological systems in construction is a complex multi-criteria decision-making task. Many decision-makers refuse innovations once faced with similar difficulties. Therefore, using modern materials and methods in this industry is necessary. Modern methods increase quality and construction speed in addition to decrease energy consumption and costs. One of the problems in the way of any project is selecting construction system compatible with the project needs and characteristics. In the present research, different concrete structures such as common reinforced concrete (RC) structure, prefabricated, Insulating Concrete Formwork (ICF), 3D Panel and Tunnel Concrete Formwork (TCF) for buildings with limited floors in Iran are studied and compared from the viewpoint of different criteria like cost, time, applicability and technical characteristics with industrialization approach. Therefore, some questionnaires filled out by construction industry experts in order to compare criteria and sub-criteria in addition to evaluation of optimized structural systems. Then, results of the questionnaires ranked by Analytic Hierarchy Process (AHP) and the most effective alternative selected. The AHP results show that 3D Panel system 36.5%, ICF 21.7%, TCF 19.03%, prefabricated system 13.3% and common RC system 9.3% are the most and the least efficient systems respectively.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2017

Innovations from current researches on cloud computing such as applying bio-inspired computing techniques have brought new level solutions in offloading mechanisms. With the growing trend of mobile devices, mobile cloud computing can also benefit from applying bio-inspired techniques. Energy-efficient offloading mechanisms on mobile cloud systems are needed to reduce the total energy consumption but previous works did not consider energy consumption in the decision-making of task distribution. This paper proposes the Particle Swarm Optimization (PSO) as an offloading strategy of cloudlet to data centers where each task is represented as a particle during the process. The collected tasks are classified using K-means clustering on the cloudlet before applying PSO in order to minimize the number of particles and to locate the best data center for a specific task, instead of considering all tasks during the PSO process. Simulation results show that the proposed PSO excels in choosing data centers with respect to energy consumption, while it has accumulated a little more processing time compared to the other approaches.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.130-143
• /
• 2020

The development of three-dimensional (3D) printing technology is bringing new innovations to various fields such as health care, architecture, and fashion. 3D printing can be manufactured to suit the size of the consumer's body, modify the design to meet their tastes, and produce small quantities of various products. Therefore, 3D printing in the field of fashion has great potential. The purpose of this study was to investigate various application models of 3D printing for fashion design and analyze their characteristics after developing the fashion garment samples. First, the background of 3D printing was reviewed then, fashion designed by a 3D printing application was analyzed. As a result, four types of 3D printing applications were developed: object-attached, linkage, kinematics, and assembly. The object-attached type was the method of printing 3D material as an object in the intended shape and form and was attached to the garment by sewing. The linkage type referred to printing 3D material in small pieces of certain shapes that could be linked. The kinematics type was structures with hinges that could flex to fit the human body. The assembly type referred to developing 3D materials in female and male pieces such as nuts and bolts. By providing the advantages, disadvantages, trial-and-errors, and challenges of the 3D printing fashion design process, this study contributes to the effective applications and possibilities of future design.

• Journal of the Korea Furniture Society
• /
• v.20 no.5
• /
• pp.467-479
• /
• 2009

The high-tech computer technology developments have greatly affected the area of design education. Starting from the mid 80s, innovations in visual presentation methods have heightened with 2D computer graphic programs, CAD & 3D modeling, and Rapid Prototype that allows dimensional generation. The specialty and quality in design studio education have advanced due to the development in presentation methods such as Power Point and Keynote. But there are many problems with the current method of presenting the visual outcome in a data format using beam projectors, which is a vertical presenting method compared to the old studio study method of conducting discussions and reviews based on the substantial outcome. The essence of studio study that allows for comparisons and analysis by horizontally opening up the various work outcomes is being offset. Also the requirement for manual idea sketching work that plays an important role in the initial design phase continuing to decrease due to the digital working process dependence and cumbersome procedures in the presentation. In order to resolve this problem, the CALM system (Class Applied LCD Modular System) has been developed that replaces the method of attaching the sketches or renderings on the wall with a digital multi-display system. In a nutshell, individuals will upload the outcomes online and display them on the CALM system studio that is composed of 32 LCD (Columns: 4 $\times$ Rows: 8) monitors that are 19 inches in size so that various personnel can openly study the design outcomes. Also the central 42 inch PDP monitor that offers touch pad capability allows each design outcome to be described and examined by expanding. The concept phase of this development process has elevated to the production of an operating prototype that is being reviewed of its practicality. It is considered that the development of this system will decrease the extreme tendency of depending on digital operation but achieve revitalization of a more realistic and opened studio study environment compared to the individual consulting method of the old study approach.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.29-36
• /
• 2019

In modern society in which the fourth industrial revolution has come to the fore and rapid technology innovations are taking place, a phenomenon of making and selling small quantities of various products that consumers want instead of mass producing one item has emerged. As the market is moving toward the multi-item small-sized production system, there is a need for a system in which a machine independently judges and carries out machining and post-processing. In order for a machine to judge processing on its own, it is necessary to measure the force applied to a product. This study aimed to develop a large-scale dynamometer that enables three-axis measurement using octagonal ring load cells. As for the device's configuration, four octagonal ring load cells, which were previously researched, were used to enable three-axis measurement. It was reconfigured by modifying the attachment position of the octagonal ring load cells' strain gauge and the Wheatstone bridge of each axis, and a system was set up to allow the monitoring of data measured through the monitor. The configured device calculated a strain rate by an experiment, and this rate was compared with the theoretical strain rate to find a correction value. The correction value was entered into a formula, deriving a modified formula. The modified formula was entered into the device, which completed the large-scale dynamometer.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.51-58
• /
• 2022

The article emphasizes the features of the modern education system in Poland, reveals the peculiarities of improving the professional competence of a specialist in Poland through the implementation of multimedia technologies. Various forms of innovations implemented in improving the professional competence of a specialist are listed: improvement (rationalization), modernization, innovation. The forms of professional improvement through the introduction of computer technologies in general and multimedia technologies, in particular, primarily include various professional courses, qualification, preparatory, methodological conferences, seminars, postgraduate studies, foreign and state internships. At the same time, the main direction is self-education. The subject of professional improvement in the application of computer technologies by specialists is the updating of existing knowledge, exchange of professional experience, planning, as well as discussion of innovative works in which specialists participate. Professional growth of specialists can occur both during work and in higher education institutions during their studies. Modernization of computer technologies, especially multimedia ones, is a necessary condition for the functioning of specialists in modern society, since specialists are at the center of the educational process, during the improvement of professional competence. The main functions of the educational process necessary for improving the professional competence of specialists through the implementation of multimedia technologies are revealed. These functions not only contribute to the professional improvement of specialists, but also affect their solutions and optimize the maintenance of contacts between specialists. The importance of creating conditions that are consistent with the modern needs of innovative education is emphasized.

• Journal of Technology Innovation
• /
• v.31 no.2
• /
• pp.29-58
• /
• 2023

The knowledge and technological competitiveness produced by universities determines a country's scientific technology and industrial competitiveness. The aim of this study is to find the evolution of Triple Helix Model (THM) by analyzing cases of technological catching-up and nurturing the human capital policies during Korea industrialization era, from 1960 to 2020. To fulfill the aims, this study utilized qualitative methodologies. In this study not only the process of acquiring technologies and core technologies but also the system for nurturing the human capital focused on scientific and engineers was analyzed. In addition characteristics of each ear of Triple Helix Model (THM) were examined. From the results, this study suggests Triple Helix Syncro-Scenario (THSS) which is the compelling innovation model, based on scenario, combined the personal experiences various critical thoughts and problems with enterprises and government for creating the incessment innovations.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.95-106
• /
• 2024

The article is devoted to the design and development of an information system for preserving the results of testing to verify the residual knowledge of students of the resource for training specialists in information and communication technologies. The purpose of the study is to provide a scientific justification for the problem of developing professional training of specialists in information and communication technologies in the process of using an information system to save test results to verify students' residual knowledge and to verify the effectiveness of its implementation in universities. According to the results of the experiment, it can be argued that the introduction of an information system to preserve the results of testing to test students' residual knowledge in the educational process contributes to the professional training of specialists in information and communication technologies at the universities of Ukraine. The practice of development and use of modern information technologies focused on the implementation of psychological and pedagogical goals of teaching and education is fundamentally new mediated by modern technical and technological innovations.

• Information Systems Review
• /
• v.19 no.1
• /
• pp.169-183
• /
• 2017

As global competition is heating up and product life cycle has been rapidly shortened, each company pursues a variety of competitive technology innovations through different means of innovation. In this study, we assume that open innovation can be a shift motive of the technology innovation paradigm of small and medium enterprises (SMEs) being beyond the limitations of R&D within a company. We analyze the process and content of open innovation and performance. In addition, we identify the problems generated in the open innovation process and analyze the ways to strengthen open innovation. This study is based on the investigations into the technological competitiveness of local SMEs. The innovation ecosystem is analyzed from the perspective of product/service innovation, organizational innovation, and marketing innovation. Situational analysis is presented on the relationship between the innovation capabilities of information and communication technology SMEs and innovation performance.

• Asia-Pacific Journal of Business
• /
• v.14 no.4
• /
• pp.87-113
• /
• 2023

Purpose - Focusing on Haier, a successful corporate venture in China, we analyse the operating mechanism and success factors of corporate venture, and reveal the necessary factors for the successful implementation of corporate venture. Design/methodology/approach - This study is a single case study centred on Haier, a successful corporate venture in China. Findings - The operational process of Haier's corporate venture includes six key aspects: project selection, team building, resource allocation and support, project implementation, risk control measures, performance evaluation and rewards. In terms of success factors, the support of top management with leadership capability of value creation and sharing is very important for the success of corporate venture. Secondly, a multi reward mechanism can be introduced to motivate employees and improve performance. Thirdly, it is important to integrate corporate culture into the operating mechanism of an corporate venture. Fourthly, flexible operations that break down rigid organisational boundaries and transform the organisation into a more open platform for entrepreneurship can increase the likelihood of success. Finally, empowering employees with operational discretion can also have a positive impact on the success of an Corporate Venture. Research implications or Originality - This study contributes to theory and practice by analysing the success conditions of corporate venture, providing new understanding and drawing new perspectives, especially from the experience of Haier. The results suggest strategies and flexibility for successfully pursuing corporate venture, and provide important experience for international companies to help them gain competitive advantage in global competition. It also helps corporate leaders to promote new directions and innovations and improve their strategies to respond to dynamic environments.