• 방사선산업학회지
• /
• 제6권3호
• /
• pp.231-237
• /
• 2012

This paper introduces a gamma-ray measurement system for a transportable tomography which is applicable for an industrial process diagnosis. The gamma-ray measurement system consists of pulse mode operating 72 channel CsI detectors, main AMP-pulse shaper, single channel analyzer, counter and control PC. The CsI crystal is coupled with a PIN diode which is connected to an amplifier and pulse shaper. For a compact design, the amplifier and pulse shaping circuit are included in a single package. 36 sets of CsI detectors are connected to a multi-channel counter through single channel analyzers. A computer controls and collects data from two multi-channel counters. This configuration results in 72 channel counting system in total. The CT rotator and radiation measurement system are controlled by a PC with LabVIEW program. Tomographic data were measured for a phantom by the measurement system and transportable gamma-ray CT. From the experimental data image reconstructions were performed by ML-EM algorithm. The result showed that the CsI detector system can be a suitable component for transportable gamma-ray CT system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2529-2543
• /
• 2019

Scanning electron microscopy (SEM) image can link with the microscopic world through reflecting interaction between electrons and materials. The SEM images are easily subject to blurring distortions during the imaging process. Inspired by the fact that dark channel prior captures the changes to blurred SEM images caused by the blur process, we propose a method to evaluate the SEM images sharpness based on the dark channel prior. A SEM image database is first established with mean opinion score collected as ground truth. For the quality assessment of the SEM image, the dark channel map is generated. Since blurring is typically characterized by the spread of edge, edge of dark channel map is extracted. Then noise is removed by an edge-preserving filter. Finally, the maximum gradient and the average gradient of image are combined to generate the final sharpness score. The experimental results on the SEM blurred image database show that the proposed algorithm outperforms both the existing state-of-the-art image sharpness metrics and the general-purpose no-reference quality metrics.

• 한국콘텐츠학회논문지
• /
• 제19권7호
• /
• pp.348-359
• /
• 2019

최근에는 극장 뿐 아니라 온라인 채널을 통한 영화 콘텐츠 소비가 증가하고 있다. 영화 채널이 다양해짐에 따라 영화 채널 선택 과정에 대한 관심이 증가하고 있으며, 영화 채널 선택은 소비자의 특성에 따라 다르게 나타날 수 있다. 따라서 본 연구에서는 소비자의 성격(민감성, 성실성, 개방성, 친화성)이 영화 채널을 선택하는 요인(극장의 본원적 요인과 부가적 요인, 온라인 채널의 본원적 요인과 부가적 요인)과 채널에 대한 태도(극장, IPTV, 케이블TV, OTT에 대한 태도)에 어떤 영향을 미치는지 살펴보았다. 본 연구의 결과는 소비자의 성격 특성을 영화 채널 선택 과정과 연결시켜 연구했다는 점에서 학문적 의의를 가지며, 극장과 온라인 영화 채널을 운영하는 기업이 소비자를 대상으로 어떤 마케팅 전략을 실행해야 하는지에 대한 방향을 제시했다는 점에서 실무적 의의를 가진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.236-239
• /
• 1995

In short channel MOSFET, it is very important to establish optimal process conditions because of variation of devise characteristics due to the process parameters. In this paper, we used process simulator and device simulator in order to optimize process parameter which changes of the device characteristics caused by process parameter variation. From this simulation, it has been derived to the dependence relations between process parameter and device characteristics. The experimental results of fabricated short channel device according to the optimal process parameters demonstrate good device characteristics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.531-536
• /
• 2003

Equal channel angular pressing (ECAP) has been employed to produce materials with ultra-fine grains that have high strength and high corrosion resistance properties. In order to obtain super plastic deformation during ECAP, multipass angular pressing is frequently employed. In this paper, three-dimensional finite element analyses have been performed to investigate the deformation behavior of pure-Zr specimen and the effects of process parameters for equal channel multi-angular pressing (ECMAP) process. The results have been compared with some experimental results

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.92-98
• /
• 2020

In this study, an injection mold with conformal cooling channels was designed and manufactured for use in the production of a thick plastic cosmetic container that required high gloss surfaces. A cooling analysis verified the design of the conformal cooling channel for the cosmetic container, and also showed that the cooling efficiency was superior to that of the straight cooling channel. Slide cores designed with the conformal cooling channel were manufactured using the Layers Parting method and vacuum diffusion bonding. Subsequent test injection and quality inspection showed no problem in the appearance and dimensional accuracy of the produced product. The cycle time for product production was about 110 seconds, sufficient for mass production.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.84-90
• /
• 2018

When producing a plastic horn cover for an automobile, since the interval between the ribs on the inner surface is narrow, conventional cooling channels cannot be applied and cooling of the mold is difficult. For this reason, the molding operation cannot be completed within a set cycle time. In this study, a conformal cooling channel was applied on the mold to solve the cooling problem. Injection molding simulation was carried out to confirm the effectiveness of the conformal cooling channel. In the analysis results, the mold temperature at the rib section decreased by 33%, and the mold temperature also decreased by 31%. This reduction in temperature allowed for molding within a set cycle time and demonstrated the effectiveness of the conformal cooling channel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.367-370
• /
• 2009

Recently, ultra high strength products can be manufactured by the hot press forming process of Boron steel in automotive and electronics industries. In order to get high strength, the hot press forming should be accompanied by quenching process inducing phase transformation. In the study, the heat conductive die and the cooling channel were designed by the numerical simulation and the effect of three different parameters were determined to improve cooling characteristics.

• 인터넷정보학회논문지
• /
• 제10권3호
• /
• pp.85-94
• /
• 2009

본 논문에서는 무선 센서 네트워크에서의 에너지 효율적인 전송방안을 제안하고 이에 대한 이론적 분석을 제시하고자 한다. 본 논문에서 제안하는 전송기법은 채널 상태가 상대적으로 좋을 때만 전송을 시도하는 opportunistic transmission에 기반한 이진 결정 (binary-decision) 기반 전송이다. 이진 결정 기반 전송에서는 Markov decision process (MDP)를 이용하여 성공적인 전송을 위한 최적의 채널 임계값을 도출하였다. 다양한 시뮬레이션을 통해 제안하는 전송기법의 성능을 에너지 효율성과 전송율 측면에서 분석하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권1호
• /
• pp.16-21
• /
• 2006

A simple doping method to fabricate a very thin channel body of the p-type FinFETs with a 20 nm gate length by solid-phase-diffusion (SPD) process was developed. Using the poly-boron-films (PBF) as a novel diffusion source of boron and the rapid thermal annealing (RTA), the p-type sourcedrain extensions of the FinFET devices with a threedimensional structure were doped. The junction properties of boron doped regions were investigated by using the $p^+-n$ junction diodes which showed excellent electrical characteristics. Single channel and multi-channel p-type FinFET devices with a gate length of 20-100 nm was fabricated by boron diffusion process using PBF and revealed superior device scalability.