• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.46-51
• /
• 2010

We propose the novel Hybrid bus arbitration policy that prevents a priority monopolization presented in fixed priority and effectively assigns a priority to each master by mixing fixed priority and round-robin arbitrations. The proposed arbitration policy and the others were implemented through Verilog and mapped the design into Hynix 0.18um technology and compared about gate count and area overhead. In the results of performance analysis, we confirm that our proposed policy outperforms the others and effectively controls the bus utilization.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.132-147
• /
• 2008

So far ubiquitous service (u-service) priority has seldom been empirically examined based on the customer's view. It is usual to prioritize the relative importance of u-service variables by the supplier's intuition and a few specialist's experienced knowledge. Such approaches have the disadvantage that they provide only limited empirical information on the field practices in relation to u-service since customer demand of u-service is poorly defined despite abundant interest in this problem. Therefore, the aim of this research was to develop u-service priority model in the context of multi-criteria framework integrating customer and supplier's view, using high technology acceptance theory as major controlling factors. An important question was how to measure or represent criteria that is important to u-service and should be included in a priority model. The selection criteria for the model variables were derived from high technology acceptance theory and AHP approach through the analysis of frequency count, elimination of overlapping factors and brainstorming with specialists. Daegu showed top-rankings in transportation-aid service, guidance service for the eyesight disabled and u-telematics service. In contrast, disaster prevention service and industrial specialized town service ranked highly in the typical supplier's approach were not a dominant determining factor in the u-service priority. The model identified the fact that typical high priority service in terms of supplier's view did not necessarily accompany the important predictor for the u-service priority.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.207-214
• /
• 2015

The purpose of this paper is an application of AHP(Analytic Hierarchy Process) in the priority setting of promising technology in division of senior friendly product based on the previous studies. In this paper, the decision criteria for evaluating promising technologies in division of senior friendly product are identified and the hierarchical structure of decision making process is developed systematically. Subsequently the values of weights for relative importance among decision criteria are derived using AHP methodology, and the score of importance of promising technology in division of senior friendly product with respect to each criterion is evaluated. Finally the score of each promising technology in division of senior friendly product is quantified in order to prioritize them. We discuss implications of our results with a viewpoint of technology policy in division of senior friendly product.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.105-113
• /
• 2020

The development and application of cultural technologies(CT) are expected to lead to create various service scenarios and business models. Considering the wide range of application and extensibility of CT, it is necessary to design multidimensional evaluation methods for priority of the support of R&D budgets. The method should include the various evaluation criteria such as economic feasibility and user benefit of service made by a cultural technology. Our research addresses priority decision for fosterage of cultural technologies using fuzzy TOPSIS. Seven evaluation attributes are used to compare five specific technologies. Based on the results, service usefulness is the most important factor among the evaluation attributes. Also, technologies of computer graphics and UI/UX have higher priority than the others. We expect our research to help to provide guidelines for selection of promising cultural technologies which foster the culture and contents industry.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.261-274
• /
• 2019

This paper aims to develop an appropriate methodology for establishing an investment strategy for 'demonstration of artificial rainfall technology using UAV' and that include establishment of a technology classification, set of indicators for technology evaluation, suggestion of final key technology as a whole study area. It is designed to complement the latest research trend analysis results and expert committee opinions using quantitative analysis. The key indicators for technology evaluation consisted of three major items (activity, technology, marketability) and 10 detailed indicators. The AHP questionnaire was conducted to analyze the importance of indicators. As a result, it was analyzed that the attribute of the technology itself is most important, and the order of closeness to the implementation of the core function (centrality), feasibility (feasibility). Among the 16 technology groups, top investment priority groups were analyzed as ground seeding, artificial rainfall verification, spreading and diffusion of seeding material, artificial rainfall numerical modeling, and UAV sensor technology.

• Journal of Communications and Networks
• /
• v.4 no.2
• /
• pp.128-135
• /
• 2002

We propose a new space priority mechanism, and analyze its performance in a single Constant Bit Rate (CBR) server. The arrival process is derived from the superposition of two types of traffics, each in turn results from the superposition of homogeneous ON-OFF sources that can be approximated by means of a two-state Markov Modulated Poisson Process (MMPP). The buffer mechanism enables the Asynchronous Transfer Mode (ATM) layer to adapt the quality of the cell transfer to the Quality of Service (QoS) requirements and to improve the utilization of network resources. This is achieved by "Selective-Delaying and Pushing-ln"(SDPI) cells according to the class they belong to. The scheme is applicable to schedule delay-tolerant non-real time traffic and delay-sensitive real time traffic. Analytical expressions for various performance parameters and numerical results are obtained. Simulation results in term of cell loss probability conform with our numerical analysis.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1248-1257
• /
• 2014

Overhead transmission lines are crucial components in power transmission systems. Well-designed maintenance strategy for overhead lines is required for power utilities to minimize operating costs, while improving the reliability of the power system. This paper presents a maintenance priority index (MPI) of overhead lines for a reliability centered approach. Proposed maintenance strategy is composed of a state index and importance indices, taking into account a transmission condition and importance in system reliability, respectively. The state index is used to determine the condition of overhead lines. On the other hand, the proposed importance indices indicate their criticality analysis in transmission system, by using a load effect index (LEI) and failure effect index (FEI). The proposed maintenance method using the MPI has been tested on an IEEE 9-bus system, and a numerical result demonstrates that our strategy is more cost effective than traditional maintenance strategies.

• Journal of Information Technology Applications and Management
• /
• v.31 no.3
• /
• pp.39-52
• /
• 2024

The development of autonomous driving technology is expected to bring about a major change in the mobility rights of the transportation vulnerable. It is very important to identify user requirements in developing autonomous vehicles and service technologies for the transportation vulnerable. User requirements were derived for the wheelchair disabled and the walking disabled. Through focus interviews, a total of 58 requirements were derived for wheelchair-using disabled people and 53 requirements for walking disabled people. A Kano survey was conducted on 33 wheelchair disabled and 34 walking disabled. After that, the quality types of functional requirements in terms of autonomous vehicles and service environment development were analyzed using the Kano model. Priority analysis was conducted on the functions required by the wheelchair disabled and the walking disabled. The results of this study can be used as basic data to determine the priorities of user function requirements in the early stages of autonomous vehicle and service technology development.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.5-10
• /
• 2003

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.2
• /
• pp.87-94
• /
• 2017

The utilization of the achievements derived from the national R & D project is a key task of the science and technology industry policy that should lead the national economic growth by enhancing the investment efficiency of the national R&D. Although Korea has implemented various programs supporting technology transfer, commercialization, Performance is not sufficient. One of several causes may include inflexibility of a small or medium-sized company Priority System. This study is exploratory research on the directions for improving the current a small or medium-sized company Priority System. Results: First, Because the current SMEs Priority System contributes positively to enhancing SMEs R&D capability, We have to keep the system in principle. However, it is necessary to improve the direction of giving the strategic flexibility of the system so that the system is not operated formally. First, it is appropriate to make an exceptional contract with a person other than a small or medium-sized company, if a small and medium-sized company is not suitable for a technology execution contract due to the nature of technology. Second, it is desirable to consider the fulfillment of the obligations of this system when "sufficient efforts" are made to find a technical user.