• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.409-425
• /
• 2013

This study presents a prediction of a time-series of the area inundated by effluent from Heavenly Lake caused by ground behavior prior to a volcanic eruption. A GIS-based hydrological algorithm that considers the multi-flow direction of effluent, the absorption and storage capacity of the ground soil, the storage volume of the basin or the depression terrain, was developed. To analyze the propagation pattern, four hypothetical collapse zones on the cheonji ground were set, considering the topographical characteristics and distributions of volcanic rocks at Mt. Baekdu. The results indicate that at 3 hours after collapse, for both scenarios 1 and 2 (collapses of the entire/southern boundary of cheonji), a flood hazard exists for villages in China, but not for those on the North Korean side of the mountain, due to the topographical characteristics of Mt. Baekdu. It is predicted that villages in both North Korea and China would be significantly damaged by flood inundation at 3 hours elapsed time for both scenarios 3 and 4 (collapses on the southern boundary of cheonji and on the southeastern-peak area).

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.535-544
• /
• 2016

This paper aims at examining the effects of sustained load and elevated temperature on the time-dependent deformation of a carbon fiber reinforced polymer (CFRP) sheets bonded to concrete as well as the pull-off strength of single-lap shear specimens after the sustained loading period using digital images. Elevated temperature during the sustained loading period resulted in increased slip of the CFRP composites, whereas increased curing time of the polymer resin prior to the sustained loading period resulted in reduced slip. Pull-off tests conducted after sustained loading period showed that the presence of sustained load resulted in increased pull-off strength and interfacial fracture energy. This beneficial effect decreased with increased creep duration. Based on analysis of digital images, results on strain distributions and fracture surfaces indicated that stress relaxation of the epoxy occurred in the 30 mm closest to the loaded end of the CFRP composites during sustained loading, which increased the pull-off strength provided the failure locus remained mostly in the concrete. For longer sustained loading duration, the failure mode of concrete-CFRP bond region can change from a cohesive failure in the concrete to an interfacial failure along the concrete/epoxy interface, which diminished part of the strength increase due to the stress relaxation of the adhesive.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.690-698
• /
• 2010

Contamination of groundwater resources by organic chemicals has become an issue of increasing environmental concern. Surfactant-enhanced aquifer remediation (SEAR) is widely recognized as one of the most promising techniques to remediate organic contaminations in-situ. Solutions of surfactant or surfactant with polymer are used to dramatically expedite the process, which in turn, may reduce the treatment time of a site compared to use of water alone. In the design of surfactant-based technologies for remediation of organic contaminated aquifers, it is very important to have a considerable analysis using extensive numerical simulations prior to full-scale implementation. This study investigated the formation and flow of microemulsions during SEAR of organic-contaminated aquifer using the finite difference model UTCHEM, a three-dimensional, multicomponent, multiphase, compositional model. The remediation process variables considered in this study were the sequence of injection fluids, the injection and extraction rate, the concentrations of polymer in surfactant slug and chase water, and the duration of surfactant injection. For each variable, temporal changes in injection and production wells and spatial distributions of relative saturations in the organic phase were compared. Cleanup time and cumulative organic recovery were also quantified. The study would provide useful information to design strategies for the remediation of nonaqueous phase liquid-contaminated aquifers.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2011

Recently, the visual grading rule of Korea Forest Research Institute (KFRI) was revised and it is necessary to investigate the distribution characteristics of visual graded lumber in accordance with the revised rule. Therefore, in this study, the distribution characteristics of bending strength was investigated with revised visual grading rule and changed prior rule, respectively. The size of specimens was $38{\times}140{\times}3,000$ (mm) and the species were $Larix$ $kaempferi$ and $Pinus$ $koraiensis$. The moisture content was under 18% and the specimens were tested in accordance with ASTM D-198. The number of No. 1 and 2 grades, suitable for structural lumber, was increased when the revised visual grading rule was applied. Moreover, the revised rule was more effective to distinguish sharply between No. 1 and 2 grades and below No. 3 grade. Meanwhile, the lower 5% exclusion limit and allowable stresses were generally decreased when revised visual grading rule had been applied. However, the announcement of Korea Forest Service, tested with small clear specimen, was much lower than the allowable stresses of this test, tested with structural lumber. Therefore, the revision of allowable design values should be considered for more exact use and effective structural design.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.119-142
• /
• 2005

The purpose of this study is to explore and describe of the reality of working poor in Korea. In spite of the increasing attention to the working poor, usual definitions of the working poor have some measurement questions. The definition of the working poor should focus on the key dimensions of work and poverty. This study defines working poor as all "persons who have devoted prior 6 months to working or looking for work and who lived in families with incomes below the poverty threshold". This study also defines poverty threshold based on the both concept of absolute and relative poverty. According to this definition, the working poor are almost equally divided between men and women and the majority of them are of prime working age. These characteristics of working poor are seems to be quite different from common sense. Also, serious deficiencies of human capital contribute to the employment problems of the working poor. Their education levels are much less than those of the working non-poor. The distributions of the employment status, occupation, and industry show also that the working poor are highly concentrated in a few low-wage jobs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.199-210
• /
• 2012

The effects of tunnelling in weak weathered rock on the behaviour of a pre-existing single pile and pile groups ($3{\times}3$ and $5{\times}5$ pile groups) above a tunnel have been studied by carrying out three-dimensional (3D) elasto-plastic numerical analyses. Numerical modelling of such effects considers the response of the single pile and pile groups in terms of tunnelling-induced ground and pile settlement as well as changes of the shear transfer mechanism at the pile-soil interface due to tunnelling. Due to changes in the relative shear displacement between the pile and the soil at the pile-soil interface with tunnel advancement, the shear stresses and axial pile force distributions along the pile change drastically. Based on the computed results, upward shear stresses are induced up to about Z/L=0.775 from the pile top, while downward shear stresses are mobilised below Z/L=0.775, resulting in a reduction in the axial pile force distribution with depth equivalent to a net increase in the tensile force on the pile. A maximum tensile force of about $0.36P_a$ developed on the single pile solely due to tunnelling, where $P_a$ is the service axial pile loading prior to tunnelling. The degree of interface shear strength mobilisation at the pile-soil interface was found to be a key factor governing pile-soil-tunnelling interaction. Overall it has been found that the larger the number of piles, the greater is the effect of tunnelling on the piles in terms of pile settlement, while changes of the axial pile forces for the piles in the groups are smaller than for a single pile due to the shielding effect. The reduction of apparent allowable pile capacity due to tunnelling-induced pile head settlement was significant, in particular for piles inside the groups.

• Progress in Medical Physics
• /
• v.29 no.2
• /
• pp.59-65
• /
• 2018

This paper describes the clinical use of the dose verification of multileaf collimator (MLC)-based CyberKnife plans by combining the Octavius 1000SRS detector and water-equivalent RW3 slab phantom. The slab phantom consists of 14 plates, each with a thickness of 10 mm. One plate was modified to support tracking by inserting 14 custom-made fiducials on surface holes positioned at the outer region of $10{\times}10cm^2$. The fiducial-inserted plate was placed on the 1000SRS detector and three plates were additionally stacked up to build the reference depth. Below the detector, 10 plates were placed to avoid longer delivery times caused by proximity detection program alerts. The cross-calibration factor prior to phantom delivery was obtained by performing with 200 monitor units (MU) on the field size of $95{\times}92.5mm^2$. After irradiation, the measured dose distribution of the coronal plane was compared with the dose distribution calculated by the MultiPlan treatment planning system. The results were assessed by comparing the absolute dose at the center point of 1000SRS and the 3-D Gamma (${\gamma}$) index using 220 patient-specific quality assurance (QA). The discrepancy between measured and calculated doses at the center point of 1000SRS detector ranged from -3.9% to 8.2%. In the dosimetric comparison using 3-D ${\gamma}$-function (3%/3 mm criteria), the mean passing rates with ${\gamma}$-parameter ${\leq}1$ were $97.4%{\pm}2.4%$. The combination of the 1000SRS detector and RW3 slab phantom can be utilized for dosimetry validation of patient-specific QA in the CyberKnife MLC system, which made it possible to measure absolute dose distributions regardless of tracking mode.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.643-650
• /
• 1996

A long term feeding trial was conducted to study the effects of different dietary vitamin C levels on growth and its tissue distributions in juvenile Korean rockfish, Sebastes schlegeli. Prior to the start of feeding trial, fish were fed the basal diet supplementing no L-ascorbic acid for four weeks to minimize their body reserves of vitamin C. Then fish were divided into six groups with triplicates and given one of the laboratory semipurified diets supplementing either 0, 25, 50, 75, 150, or 1500 mg L-ascovbic acid (AA)/kg diet $(C_0,\;C_{25},\;C_{50},\;C_{75},\;C_{150},\;&\;C_{1500})$. Fish fed the $C_0$ diet had lower percent weight gain, feed conversion ratio, specific growth rate, and protein efficiency ratio than did fish fed the other diets (P<0.05). After 28 weeks of feeding trial, tissue AA concentrations of fish fed $C_0$ diet were lower than those of fish fed $C_{1500}$ diet (P<0.05). A large amount of total tissue Ah may be reserved in muscle, but the unit AA concentration seemed to be higher in brain than did the other tissues. The growth performances of fish fed $C_{25}$ diet were not different compared to those of fish fed $C_{50}-C_{1500}$ diets (P>0.05), and diet analysis of vitamin C showed that the $C_{25}$ diet had 65 mg AA/kg diet. Therefore, the present long-term study may suggest that the dietary vitamin C requirement is approximately 65 mg AA/kg diet in juvenile Korean rockfish.

• Journal of Educational Research in Mathematics
• /
• v.16 no.3
• /
• pp.221-249
• /
• 2006

The object of this study is to understand the characteristics of mathematical knowledge that elementary 5th graders have regarding the statistical variation concept and the changes after taking lessons. This study includes a pretest to examine the characteristics of mathematical knowledge that elementary 5th graders have regarding the statistical variation concept. And It was followed by a lesson on statistical variation concept to be able to correct error which was revealed by the inspection, and to improve good points. It turned out that after five lessons on the statistical variation concept, the insufficient aspects were properly improved, and as for the points they already understand, they came to understand better than before. They came to consider the statical variation concept instead of the frequency, preponderance, average, stable traits for the optimum value. Also, through the lesson on drawing tables and graphs, they came to better understand them, analyzing correctly the exercises in which tables and graphs were combined. When comparing data sets whose general distributions and extents were similar, students came up with the right answers in a stable way by considering averages combining statistical variation too. Since they tended to interpret a situation with their own subjective views adding conditions, teachers need to examine the proper situation and conditions prior to the lessons on the statistical variation concept.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1809-1818
• /
• 2010

In order to detect the skin color area from input images, many prior researches have divided an image into the pixels having a skin color and the other pixels. In a still image or videos, it is very difficult to exactly extract the skin pixels because lighting condition and makeup generate a various variations of skin color. In this thesis, we propose a method that improves its performance using hierarchical merging of 3D skin color model and context informations for the images having various difficulties. We first make 3D color histogram distributions using skin color pixels from many YCbCr color images and then divide the color space into 3 layers including skin color region(Skin), non-skin color region(Non-skin), skin color candidate region (Skinness). When we segment the skin color region from an image, skin color pixel and non-skin color pixels are determined to skin region and non-skin region respectively. If a pixel is belong to Skinness color region, the pixels are divided into skin region or non-skin region according to the context information of its neighbors. Our proposed method can help to efficiently segment the skin color regions from images having many distorted skin colors and similar skin colors.