• 패션비즈니스
• /
• 제12권1호
• /
• pp.147-163
• /
• 2008

This research aims to develop cultural products for professional sales after producing creative products utilizing dinosaur characters, which are the representative exhibited item of dinosaur-centered museum. There are seven museums in Korea whose theme is dinosaur. There are three dinosaur museums among them, Goseong Dinosaur Museum at Kyungnam, Mokpo Natural History Museum, and Seodaemun Museum of Natural History. While inspecting cultural products within the museum shops of these three museums, general products occupy more than 80% of all the products rather than products related to dinosaurs, and has a problem that most products are decorative ones. This resulted from that enterprises supplying these products are not professional ones and are irrelevent to cultural industry; as result, purpose of conveying culture through products is lost. This research develops dinosaur characters utilizing computer 3D techniques in order to imbue unique characteristics to dinosaur museums and informing cultural speciality of our country. In addition, this research presented design method of cultural products by grafting traditional symbols onto these characters, and actually produced 11 items of 5 kinds: toys(dolls), clothes(T-shirts, pajamas, socks), stationery(notebooks, memo), accessaries (bags, umbrellas, handkerchief), and others(cups). On the items above, dinosaur characters are variously utilized in form of printing, embroidery, and stickers by using computer 3D technique. A cultural product is a tangible form which could show variety of cultural characteristics of our nation that could spread the culture through the consumers, and such type of purchasing could increase values of cultural industry by creating economic profits; such points are the significance of this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.276-279
• /
• 2004

Plasma enhanced chemical vapor deposition (PECVD) of silicon nitride (SiN) is a proven technique for obtaining layers that meet the needs of surface passivation and anti-reflection coating. In addition, the deposition process appears to provoke bulk passivation as well due to diffusion of atomic hydrogen. This bulk passivation is an important advantage of PECVD deposition when compared to the conventional CVD techniques. A further advantage of PECVD is that the process takes place at a relatively low temperature of 300t, keeping the total thermal budget of the cell processing to a minimum. In this work SiN deposition was performed using a horizontal PECVD reactor system consisting of a long horizontal quartz tube that was radiantly heated. Special and long rectangular graphite plates served as both the electrodes to establish the plasma and holders of the wafers. The electrode configuration was designed to provide a uniform plasma environment for each wafer and to ensure the film uniformity. These horizontally oriented graphite electrodes were stacked parallel to one another, side by side, with alternating plates serving as power and ground electrodes for the RF power supply. The plasma was formed in the space between each pair of plates. Also this paper deals with the fabrication of multicrystalline silicon solar cells with PECVD SiN layers combined with high-throughput screen printing and RTP firing. Using this sequence we were able to obtain solar cells with an efficiency of 14% for polished multi crystalline Si wafers of size 125 m square.

• Advances in aircraft and spacecraft science
• /
• 제4권3호
• /
• pp.281-296
• /
• 2017

The axial-injection end-burning hybrid rocket proposed twenty years ago by the authors recently recaptured the attention of researchers for its virtues such as no ${\zeta}$ (oxidizer to fuel mass ratio) shift during firing and good throttling characteristics. This paper is the first report verifying these virtues using a laboratory scale motor. There are several requirements for realizing this type of hybrid rocket: 1) high fuel filling rate for obtaining an optimal ${\zeta}$; 2) small port intervals for increasing port merging rate; 3) ports arrayed across the entire fuel section. Because these requirements could not be satisfied by common manufacturing methods, no previous researchers have conducted experiments with this kind of hybrid rocket. Recent advances in high accuracy 3D printing now allow for fuel to be produced that meets these three requirements. The fuel grains used in this study were produced by a high precision light polymerized 3D printer. Each grain consisted of an array of 0.3 mm diameter ports for a fuel filling rate of 98% .The authors conducted several firing tests with various oxidizer mass flow rates and chamber pressures, and analysed the results, including ${\zeta}$ history, using a new reconstruction technique. The results show that ${\zeta}$ remains almost constant throughout tests of varying oxidizer mass flow rates, and that regression rate in the axial direction is a nearly linear function of chamber pressure with a pressure exponent of 0.996.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.128-132
• /
• 2021

Advances in screen printing technology have been led to development of high efficiency silicon solar cells. As a post PERx structure, an n-type wafer-based rear side TOPCon structure has been actively researched for further open-circuit voltage (Voc) improvement. In the case of the metal contact of the TOPCon structure, the poly-Si thickness is very important because the passivation of the substrate will be degraded when the metal paste penetrates until substrate. However, the thin poly-Si layer has advantages in terms of current density due to reduction of parasitic absorption. Therefore, poly-Si thickness and firing temperature must be considered to optimize the metal contact of the TOPCon structure. In this paper, we varied poly-Si thickness and firing peak temperature to evaluate metal induced recombination (Jom) and contact resistivity. Jom was evaluated by using PL imaging technique which does not require both side metal contact. As a results, we realized that the SiN_x deposition conditions can affect the metal contact of the TOPCon structure.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.294-301
• /
• 2022

Three-dimensional (3D) printing technique has been widely used for accurate screw and pin placement in orthopedic surgery and neurosurgery. However, there are few reports comparing the accuracy between the patient-specific guides and freehand Kirschner wire (K-wire) placement in toy, small and medium breed dogs. This study aimed to assess the accuracy of 3D printed patient-specific guides (PSGs) in pin insertion in the thoracolumbar vertebrae of toy breed dogs and compare the outcomes between novice and experienced surgeons. The experiment was conducted on the thoracolumbar vertebrae of 21 euthanized toy breed dogs (median weight, 5.95 kg). The optimal insertion angle placement was determined and patient-specific guides for K-wire insertion were designed and 3D printed using computed tomography (CT) and a 3D computer-aided design program of three vertebrae (Thoracic 12-Lumbar 1). K-wire tracts were made by experienced and novice surgeons and compared to assess the accuracy based on postoperative CT. Based on postoperative CT, in the experienced group, 61 out of 63 pins (96.8%) were fully contained inside the vertebral body and lamina, whereas two pins (3.2%) had perforated the vertebral canal (grade 3, 2-4 mm breach). However, all the pins in the novice group were fully contained. The use of 3D printed PSGs for pin insertion in the thoracolumbar region is an accurate and safe alternative to freehand screw placement by novice surgeons in toy, small and medium breed dogs. Operations with 3D printed PSGs allow novice surgeons to achieve better or similar outcomes in accurate placement of pin/screws in vertebrae.

• Clinics in Shoulder and Elbow
• /
• 제26권4호
• /
• pp.397-405
• /
• 2023

Background: A precontoured plate rarely fits properly within the patient's clavicle and must be bent intraoperatively. This study aimed to determine whether anatomical reduction could be achieved using a plate bent before surgery. Methods: This study included 87 consecutive patients with displaced mid-shaft clavicle fractures who underwent plate fixation and were followed-up for a minimum of 1 year. After exclusions, 39 consecutive patients underwent fixation with a precontoured plate bent intraoperatively (intraoperative bending group), and 28 underwent fixation with the plate bent preoperatively (preoperative bending group). Using free software and a three-dimensional (3D) printer, ipsilateral clavicle 3D-printed models were constructed. Using plain radiographs, the distance between the edge of the lateral inferior cortex and the medial inferior cortex was measured. The angle between the line connecting the inferior cortex edge and the line passing through the flat portion of the superior cortex of the distal clavicle was measured. Results: Mean length differences between the ipsilateral and contralateral clavicle were smaller on both anteroposterior (AP; P=0.032) and axial images (P=0.029) in the preoperative bending group. The mean angular differences on both AP (P=0.045) and axial images (P=0.008) were smaller in the preoperative bending group. No significant differences were observed between the two groups in functional scores at the last follow-up. Conclusions: Smaller differences in length and angle between the ipsilateral and contralateral clavicle, indicative of reduction, were observed in the preoperative bending group. Using the precontoured technique with low expense, the operation was performed more effectively as reflected by a shorter operation time. Level of evidence: III.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.43.1-43.5
• /
• 2019

Background: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. Case presentation: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. Conclusion: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.

• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.18-26
• /
• 2016

반도체 산업은 우리나라 주력산업중 하나로 매년 꾸준한 성장세를 보이며 지속적인 성장을 하고 있다. 이러한 반도체 산업에서의 중요한 기술은 소자의 고 집적화이다. 이는 면적당 메모리 용량을 증가시키는 것으로 핵심역할을 하는 것이 바로 포토리소그래피 기술이다. 포토리소그래피란 마스크의 표면에 빛을 쬐어 생기는 그림자를 웨이퍼 상에 인쇄하는 기술이며 반도체 제조공정에서의 가장 중요한 공정이다. 이러한 공정을 통해 나온 패터닝을 분석 시에 폭과 단차의 균일성을 측정한다. 이에 따라 본 논문은 포토리소그래피 공정이 적용된 시험편 패터닝에 폭과 판 사이와의 단차를 투과형 디지털 홀로그래피를 구성하여 측정하고자 한다. 투과형 디지털 홀로그래피 간섭계를 구성하고 시험편에 임의의 9포인트를 설정하여 각 포인트를 측정하고 상용장비인 SEM (scanning electron microscopy)과 alpha step으로 측정한 결과와 비교하고자 한다. 투과형 디지털 홀로그래피는 측정시간이 타 기법에 비에 짧다는 장점과 배율렌즈를 사용하기 때문에 저 배율에서 고 배율로 변경하여 측정할 수 있는 장점을 가지고 있다. 실험 결과로부터 투과형 디지털 홀로그래피가 포토 리소그래피가 적용된 패터닝 측정에 유용한 기술임을 확인할 수 있었다.

• 만화애니메이션 연구
• /
• 통권48호
• /
• pp.359-383
• /
• 2017

3000년 전 이집트에서 인류 최초의 포스터가 등장한 이후 인쇄술의 발명과 문명의 발전으로 포스터 제작기술이 가속화 되었다. 이에 발맞추어 포스터의 표현 또한 단순 문자 배열에서 예술적 감성을 함께 표현하려는 시도로 발전되었으며, 이제는 전문 디자이너의 영역으로 자리 잡은 하나의 예술 형식이 되었다. 하지만 포스터의 표현 방식에 대한 기술적 변화는 이차원적 발전에 머무르고 있으며, 현대의 멀티미디어를 기반으로 하는 ICT 환경변화와는 무관한 듯 인쇄에만 의존하고 있는 상황이다. 특히, 수많은 종류의 포스터 가운데 유일하게 영상물을 대상으로 하는 영화 포스터의 양식이 아직도 종이인쇄에 그치고 있고, 지금까지 여러 시도는 있어 왔지만 영화계는 여전히 ICT 접목에 대해서는 전혀 고려치 않는 듯 같다. 이 연구는 영화포스터의 대상이 영상물을 다루고 있다는 특징으로부터 시작하여 영화의 동적 이미지를 정적 포스터에 접목시키기 위해 증강현실을 도입하는 시도를 하였다. 국내 한 대학의 영상디자인전공 졸업작품에서 학생들의 영상작품홍보를 위한 각 작품들의 포스터를 일반 상업영화 포스터 형식으로 디자인하여 인쇄하였으며, 이 중 증강현실 적용에 적합하다고 판단되는 6작품을 선별하여 증강현실을 도입하고 전시하였다. 모바일 디바이스를 통해 포스터와 정합되어 나타나는 콘텐츠는 영상물의 한 장면이 포스터 위에서 재현되지만, 원래 포스터가 표현하고 있는 텍스트 정보 등은 그대로 유지되도록 하여, 마치 영화 "해리포터"에서 등장한 현상수배 포스터와 같이 움직이는 포스터를 구현할 수 있었다. 본 증강현실 포스터 제작을 위해 두 가지 다른 형식으로 제작된 기존 상업영화의 포스터에 증강현실을 도입해 봄으로써 AR 콘텐츠의 특징을 배가시킬 수 있는 방법을 찾아 본 작품에 적용할 수 있었다. 이를 통해 AR 표현이 적합한 포스터디자인을 알 수 있었으며, 증강현실 콘텐츠 제작의 정합과정에서 증강현실의 안정적 구동을 위한 기술적 표현에 대해 정리할 수 있었다.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.211-218
• /
• 2019

목적: 본 연구에서는 CAD/CAM 기술로 제작한 4가지 금속하부구조물의 변연 및 내면 적합도를 비교하여 정확도 및 임상적 효용성을 알아보고자 한다. 재료 및 방법: 상악 중절치 레진모형치아를 삭제한 뒤 복제하여 Ni-Cr 합금 표준 모형을 제작하였다. 이를 공초점 현미경방식의 구강 스캐너를 이용해 12개의 STL 파일을 얻었다. CAD 프로그램 상에서 $50{\mu}m$의 시멘트 공간을 부여한 두께 0.5 mm의 금속하부구조물을 디자인하였다. Co-Cr 금속하부구조물은 다음 4가지 방법으로 제작하였다: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). 변연 및 내면 적합도를 측정하기 위해 실리콘 복제법을 이용하였다. 측정한 결과값은 SPSS 통계 프로그램을 이용하여 일원배치분산분석(one-way ANOVA)으로 통계처리하고, 사후검정으로 Scheffe test를 시행하였으며, 5% 유의수준으로 평가하였다(${\alpha}=.05$). 결과: 변연 적합도는 WM군($27.66{\pm}9.85{\mu}m$)과 MS군($28.88{\pm}10.13{\mu}m$)이 RP군($38.09{\pm}11.14{\mu}m$)에 비해 통계적으로 유의하게 작았다. 치경부 적합도는 MS군이 RP군에 비해 통계적으로 유의하게 작았다. 축면 적합도는 WM군과 MS군이 RP군과 SLM군 보다 통계적으로 유의하게 작았다. 절단면 적합도는 RP군이 통계적으로 유의하게 작았다. 결론: Wax pattern milling & Casting, Milling & Sintering법으로 제작한 Co-Cr coping의 변연과 축면에서의 적합도가 더 우수하였다. 모든 군의 Co-Cr coping의 변연, 치경부, 축면 적합도는 임상적으로 허용할만한 범위 안에 있었다.