• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.16-23
• /
• 2012

Use of security papers for monetary papers, gift certificates, and lottery tickets increases every year. As the use of security papers increase, there are more possibility of counterfeits. In this study, we used unique fibers from the sea to increase the difficulties against counterfeiting. The red algae fibers give opacity as much as calcium carbonates, and have unique shape in length ($500{\sim}900\;{\mu}m$) and width ($1{\sim}4\;{\mu}m$) to be discerned from other natural fibers such as wood and cotton fibers. We mixed red algae fibers to wood fibers in a series of fixed ratios to make single and multiply papers for making security papers. Paper with dyed red algae fibers were also used. Paper made without fillers gave enough opacity for printing when red algae fibers were used more than 20% of the fiber furnish. Those properties may allow red algae fibers to be a potential candidate for fiber raw materials of security paper.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.13-21
• /
• 2012

This study was carried out to evaluate the stability of archival documents produced using papers. The properties of archival documents depend on the type of fillers of papers that are used such as fiber, non cellulose fiber, and mineral. The physio-chemical characteristics of archival documents were analyzed by employing acid hydrolysis against cellulose fiber substances. Fibers of Korean hand-made (Hanji), flex, and cotten papers showed higher pH and the degree of polymerization (DP) than wood fiber and mechanical fiber. Mechanical pulp containing 12.8% of lignin showed the greatest decrease of DP due to acid hydrolysis, and this resulted in increase of degree of aging. The filler found to clay and talc did not contain metal such as $Fe^{+2}$, $Fe^{+3}$, and $Cu^{+2}$. The alkaline metals such as Mg, Ca, and Ti showed greater resistance to acid hydrolysis.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.60-68
• /
• 1997

To develop paper coating technology for preventing print mottling, which is recognized as the most common printing problems in using coated papers, ink absorption properties of various coated papers were examined by employing K 8T N and Croda ink absorption tests. The influences of pigment compositions, coat weights and drying methods on these ink absorption properties were examined, and then the variations of ink absorption ratio were analyzed and discussed. It is demonstrated that the variation of Croda ink absorption ratio induced by coat weight variation can be utilized most succesfully to predict print mottling propensity of coating formulations. A systematic analysis approach was suggested that can be employed in the development of the most desirable coating color formulation to achieve target optical properties with the least print mottling.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.47-56
• /
• 2005

In technology of ink-jet coating, Image quality from correlation between paper and ink depends on the properties of printer and ink as well as those of paper material. Generally, According to the quality of ink that consists of colorants from 5 to 20 percent, It seems that absorption behavior of each ink is different. In this study, we studied to estimate the effects of dye and pigment ink on the absorption and printing properties using 2-type papers on the market and 3-type silica-based coated papers whose pore structure is different. Using the theory of contact angle to evaluate the absorption property, it was possible to measure the baseline length between paper and ink, volume of droplet as well as contact angle. Also, It was possible to calculate wetting energy(mN/m) and spreading coefficient(mN/m) using the surface tension of each ink. These measurements were available to estimate ink-jet qualities.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.43-51
• /
• 2015

This research was performed to investigate the quality of leaflets provided with newspapers. The leaflets were classified according to business types and regions. The physical and strength properties were analyzed. The sizes of leaflets were 2, 4, 8 jeoljis of crown octavo, A3, A4, A5, and B3, B4, B5. Most of them were color printed and both-sides printing was much more popular than one-side printing. The leaflets about electronics, educations, and clothing showed lower density than restaurant business and other areas. The leaflets of electronics, educations, and clothing, and large stores showed lower tensile strength, and those of restaurant businesses and building trades showed relatively high tensile strengths. No differences on the quality of leaflets except for large stores were found according to business areas. Large markets made the leaflets with various types of papers, and low quality papers were also included.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.1-11
• /
• 2010

The physicochemical characteristics, adhesion power, and conservation of imported tapes repairing documents that consisted of adhesive, carrier, and masking were investigated. Materials related to pressure sensitive adhesive produced in domestic companies were examined also. And then, the performance evaluation of prototype manufactured in our laboratory was undertaken. Both the pressure sensitive tapes were compared. The polyacrylate of adhesive agents such as polyacrylate, starch, Glue, and PVA of imported tapes was best. The adhesion strength, power, reversibility, and stability (deterioration) of imported tapes were analyzed. By comparing results of imported tapes, two adhesive agents were selected finally. The carriers of imported tapes are made of one of papers, cotton sheets, and felts. Major carrier material was a paper. The jutes, conifers, and hardwoods were main ingredient of papers. The durability of Hangi($18{\pm}2g/m^2$) was one and half times superior to imported one.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.29-38
• /
• 2008

Print-through is one of the most important attributes of print quality and has long been a subject to study. However, some aspects of print through are still in need to be enlighten. In this paper, different kinds of evaluating methods for print through are compared using densitometry, brightness, and image analysis. Printing conditions including ink feed, drying condition, and emulsification rate are systematically changed to effect print-through both on uncoated and coated commercial papers. Also several inks from different makers are introduced and compared in terms of print-through propensity. From the results, densitometry is not a good indicator for print through on the papers in this study. Ink feed has a strong effect on print through, especially for uncoated paper and should be considered in a point of optimum ink feed level in real world. Contribution of faster ink(oil) absorption seems to be more competitive than that of ink(oil) evaporation resulting in severer print-through for hot drying process. It is shown that ink-water emulsification rate increases print through at mild level but easy to decrease it with lower density due to the increase of water contents in emulsion. It is believed that the effect of absorption overwhelms that of density drop at mild emulsification level. This study does not include the effect of ink attributes in detail but shows that distinctive differences in print through may be resulted from various ink-makers and is finalized with some suggestions.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.155-163
• /
• 2007

Porosity paper evidence is encountered in case of forgery, kidnapping, fraud and terrorist activity. The present study was designed to evaluate the effect of three chemical reagents (Ninhydrin, 1,8-diazafluoren-9-one (DFO), Iodine fuming) to the quality of developed latent fingerprints on porosity printing papers and newspaper. In case of printing papers, print quality was better with Iodine fuming method than Ninhydrin and DFO treatment to developing latent fingerprints. Developing latent fingerprint on newspapers was achieved with Iodine fuming processing. The processing of Iodine fuming followed by DFO and by using blue light (orange red filter) exhibited better results with Iodine fuming. Enhancement of latent fingerprint detection image using Digital Imaging System was achieved.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.590-605
• /
• 2021

The history of printing technology in Korea is studied by investigating existing ancient documents and records and comparing accumulated data and knowledge. Cultural property research requires non-destructive testing and observation with the naked eye or aided by a microscope. Researchers' experience and knowledge are required even though they cannot guarantee the outcome. For ancient documents and records that are presumed to consist of woodblock printing, wood type printing, metal type printing, or their combinations, each researcher draws various opinions and conclusions. This often causes confusion and divides the opinions of ordinary citizens and field specialists. Among them, the criteria for judging ancient documents or books printed using woodblock and metal movable material are ambiguous. Academic research on the development history of printing technology in ancient Korea has been stagnant, and conflicts among researchers have also erupted. Involvement of national investigative agencies not specialized in cultural properties has exacerbated the situation. In this study, we investigated printing characteristics that are likely to serve as more objective judgment criteria by quantitatively analyzing the experiments of retrieving several sheets of Korean paper (Hanji) using a replicated Hunminjeongeum (訓民正音) woodblock and quantitatively analyzing the images of the printed papers. In addition, the validity and questions for the typical phenomena presented as a method for distinguishing between woodblock and metal print are reviewed. We investigated the possibility of developing new objective judgement criteria through quantitative analysis using image analysis and investigating the printing characteristics of Korean paper through a reproduction experiment of woodblock printing.