• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.88-95
• /
• 2017

The conventional scan methods are based on a laser scanner and a depth camera, which requires high cost and complicated post-processing. Whereas in photometric scanning method, the 3D modeling data is acquired through multi-view images. This is advantageous compared to the other methods. The quality of a photometric 3D model depends on the environmental conditions or the object characteristics, but the quality is lower as compared to other methods. Therefore, various methods for improving the quality of photometric scanning are being studied. In this paper, we aim to investigate the effect of illumination conditions on the quality of photometric scanning data. To do this, 'Moai' statue is 3D printed with a size of $600(H){\times}1,000(V){\times}600(D)$. The printed object is photographed under the hard light and soft light environments. We obtained the modeling data by photometric scanning method and compared it with the ground truth of 'Moai'. The 'Point-to-Point' method used to analyseanalyze the modeling data using open source tool 'CloudCompare'. As a result of comparison, it is confirmed that the standard deviation value of the 3D model generated under the soft light is 0.090686 and the standard deviation value of the 3D model generated under the hard light is 0.039954. This proves that the higher quality 3D modeling data can be obtained in a hard light environment. The results of this paper are expected to be applied for the acquisition of high-quality data.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.270-284
• /
• 2017

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3018-3025
• /
• 2021

The authors developed a volumetric dosimetry detector system using in-house 3D-printable plastic scintillator resins. Three tumor model scintillators (TMSs) were developed using magnetic resonance images of a tumor. The detector system consisted of a TMS, an optical fiber, a photomultiplier tube, and an electrometer. The background signal, including the Cherenkov lights generated in the optical fiber, was subtracted from the output signal. The system showed 2.1% instability when the TMS was reassembled. The system efficiencies in collecting lights for a given absorbed energy were determined by calibration at a secondary standard dosimetry laboratory (k_SSDL) or by calibration using Monte Carlo simulations (k_sim). The TMSs were irradiated in a Gamma Knife® Icon^TM (Elekta AB, Stockholm, Sweden) following a treatment plan. The energies absorbed to the TMSs were measured and compared with a calculated value. While the measured energy determined with k_SSDL was (5.84 ± 3.56) % lower than the calculated value, the energy with k_sim was (2.00 ± 0.76) % higher. Although the TMS detector system worked reasonably well in measuring the absorbed energy to a tumor, further improvements in the calibration procedure and system stability are needed for the system to be accepted as a quality assurance tool.

• Journal of the Korean Society for information Management
• /
• v.21 no.2
• /
• pp.45-67
• /
• 2004

The purposes of this study are to compare and analyze the evaluation indicators for selection of journal suggested by scholars and organizations and to prepare theoretical background for the ideal model to meet opposing paradigms of collection management in academic libraries. A web survey method was employed to investigate applications of various selection criteria (27 for printed and 37 for electronic academic Journal) from the top 40 academic libraries in Korea. In addition, data were analysed statistically using factor analysis, t-test, Analysis of Variance(ANOVA), and Spearman's Rank Oder Correlation. The mean ranking for 9 evaluation indicators for printed were as follows: subscribing volumes per departments, degree of use, selection authority, electronic/print bundle, ISI impact factor, Internationality and reputation, costs for subscription, ILL ＆ DDS, space considerations for printed materials. But, 11 evaluation indicators for electronic were as follows : costs for subscription, accessibility, electronic/print bundle, consortia, selection authority, access expandability, subscribing volumes per departments, scholarly features of the university, ISI impact factor, ILL ＆ DDS, internationality and reputations.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.6
• /
• pp.351-360
• /
• 2021

PURPOSE. The aim of this study was to evaluate the efficiency of occlusal and interproximal adjustments of single implant crowns (SIC), comparing a digital cast-free approach (CF) and a protocol using 3D printed casts (PC). MATERIALS AND METHODS. A titanium implant was inserted at position of lower right first molar in a typodont. The implant position was scanned using an intraoral scanner and SICs were fabricated accordingly. Ten crowns (CF; n = 10) were subject to a digital cast-free workflow without any labside occlusal and interproximal modifications. Ten other identical crowns (PC) were adjusted to 3D printed casts before delivery. All crowns were then adapted to the testing model, simulating chair-side adjustments during clinical placement. Adjustment time, quantity of adjustments, and contact relationship were assessed. Data were analyzed using SPSS software (P < .05). RESULTS. Median and interquartile range (IQR) of clinical adjustment time was 02:44 (IQR 00:45) minutes in group CF and 01:46 (IQR 00:21) minutes in group PC. Laboratory and clinical adjustment time in group PC was 04:25 (IQR 00:59) minutes in total. Mean and standard deviation (±SD) of root mean squared error (RMSE) of quantity of clinical adjustments was 45 ± 7 ㎛ in group CF and 34 ± 6 ㎛ in group PC. RMSE of total adjustments was 61 ± 11 ㎛ in group PC. Quality of occlusal contacts was better in group CF. CONCLUSION. Time effort for clinical adjustments was higher in the cast-free protocol, whereas quantity of modifications was lower, and the occlusal contact relationship was found more favourable.

• Journal of information and communication convergence engineering
• /
• v.21 no.1
• /
• pp.24-31
• /
• 2023

The solid-state drive (SSD) possesses higher input and output speeds, more resistance to physical shock, and lower latency compared with regular hard disks; hence, it is an increasingly popular storage device. However, tiny components on an internal printed circuit board (PCB) hinder the manual detection of malfunctioning components. With the rapid development of artificial intelligence technologies, automatic detection of components through convolutional neural networks (CNN) can provide a sound solution for this area. This study proposes applying the YOLOv5 model to SSD PCB component detection, which is the first step in detecting defective components. It achieves pioneering state-of-the-art results on the SSD PCB dataset. Contrast experiments are conducted with YOLOX, a neck-and-neck model with YOLOv5; evidently, YOLOv5 obtains an mAP@0.5 of 99.0%, essentially outperforming YOLOX. These experiments prove that the YOLOv5 model is effective for tiny object detection and can be used to study the second step of detecting defective components in the future.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.104-115
• /
• 2018

Purpose: The purpose of this study is to evaluate the image acquisition ability of intraoral scanners by analyzing the comprehensiveness of scanned images from standardized model, and to identify problems of the model. Materials and Methods: Cast models and 3D-printed models were prepared according to international standards set by ISO12836 and ANSI/ADA no. 132, which were then scanned by model scanner and two different intraoral scanners (TRIOS3 and CS3500). The image acquisition performance of the scanners was classified into three grades, and the study was repeated with varying surface conditions of the models. Results: Model scanner produced the most accurate images in all models. Meanwhile, CS3500 showed good image reproducibility for angled structures and TRIOS3 showed good image reproducibility for rounded structures. As for model ingredients, improved plaster model best reproduced scan images regardless of the type of scanner used. When limited to 3D-printed model, powdered surface condition resulted in higher image quality. Conclusion: When scanning structures beyond FOV (field of view) in standardized models (following ISO12836 and ANSI/ADA 132), lack of reference points to help distinguish different faces confuses the scanning and matching process, resulting in inaccurate display of images. These results imply the need to develop a new standard model not confined to simple pattern repetition and symmetric structure.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.252-252
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.336-340
• /
• 1996

This paper presents the development of a collocated capacitance sensor and its application to the decentralized PID controller design for 4-axis magnetic bearing system. The main feature of the sensor is that it is made of a compact printed circuit board (PCB) so that it can be built in to the actuator coil of the magnetic bearing unit. The signal processing unit has been also developed. Then, decentralized PED controller is designed using simplified rotor system model. Finally, the experimental results on the performance of the collocated sensor based decentralized PID controller for a magnetic bearing rotor system is presented.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.341-344
• /
• 2000

Several new via structures in printed circuit boards are proposed, fabricated and characterized in RF regime. The new structure with a larger inductance component in the bottom layer shows 3㏈ improvement over the conventional structure. The ADS simulation with model parameters extracted from 3D fie]d solver matches with the characterization of these vias