• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1033-1039
• /
• 2012

Artificial joints are used when joints lose their function because of either the destruction or damage of the composing bones of the joints. To evaluate the primary stability of a femur-implant system, the relative displacement caused by a repeated load is measured immediately after the insertion of the artificial joint. For more accurate stability evaluation, the accurate measurement of the penetration displacement of the artificial joint to the bone and the rotation angle of the artificial joint is essential. In this study, to evaluate the primary stability of the femur-implant system, we propose a new relative displacement measurement method. By using this new method, we comparatively evaluate the primary stability for various surgical methods and the varying stiffness of the cadaver femur-implant itself.

• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.187-210
• /
• 2014

With the goal of increasing the survivorship of the prosthesis and anticipating primary stability problems of new prosthetic implants, finite element evaluation of the micromotion, at an early stage of the development, is mandatory. This allows assessing and optimizing different designs without manufacturing prostheses. This study aimed at investigating, using finite element analysis (FEA), the difference in the prediction of the primary stability of cementless hip prostheses implanted into a $Sawbones^{(R)}$ 4th generation, using the manufacturer's mechanical properties and using mechanical properties close to that of human bone provided by the literature (39 papers). FEA was carried out on the composite $Sawbones^{(R)}$ implanted with a straight taper femoral stem subjected to a loading condition simulating normal walking. Our results show that micromotion increases with a reduction of the bone material properties and decreases with the augmentation of the bone material properties at the stem-bone interface. Indeed, a decrease of the cancellous Young modulus from 155MPa to 50MPa increased the average micromotion from $29{\mu}m$ up to $41{\mu}m$ (+42%), whereas an increase of the cancellous Young modulus from 155MPa to 1000MPa decreased the average micromotion from $29{\mu}m$ to $5{\mu}m$ (-83%). A decrease of cortical Young modulus from 16.7GPa to 9GPa increase the average global micromotion from $29{\mu}m$ to $35{\mu}m$ (+33%), whereas an increase of the cortical Young modulus from 16.7GPa to 21GPa decreased the average global micromotion from $29{\mu}m$ to $27{\mu}m$ (-7%). It can also be seen that the material properties of the cancellous structure had a greater influence on the micromotion than the material properties of the cortical structure. The present study shows that micromotion predicted at the stem-bone interface with material properties of the $Sawbones^{(R)}$ 4th generation is close to that predicted with mechanical properties of human femur.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.554-560
• /
• 2008

In posterior maxilla, it is difficult to achieve primary stability of implants due to sinus pneumatization, alveolar bone loss, and low bone quality. The accurate and objective primary stability assessment is important for good prognosis of implants. Purpose: The aim of this study was to assess the primary stability of the non-submerged, internal type implants with maxillary sinus augmentation using deproteinized bovine bone mineral by a resonance frequency analyzer, when residual alveolar bone height is under 8mm Materials and methods: A total of 20 implants was placed into 5 grafted maxillary sinuses in 5 patients. Deproteinized bovine bone mineral (Bio-$Oss^{(R)}$) was used as graft material. SS II implants (diameter 4.1mm, and length 11.5mm, SLA suface)) were placed. All of the patients received maxillary sinus graft procedure by 1-step technique. Residual bone height was $1.3{\sim}7.8mm$ (mean 4.4mm) measured by panorama radiography. After implant placement, RFA was measured at 4,8,12,20 weeks. The results were divided into 2 groups; RFA value under 4mm and over 5mm of bone height. It was statistically analyzed. Results: 1. The primary stability of implants was increased with time 2. The RFA value was above 65 ISQ at 12 weeks 3. There was no correlation between RFA and residual alveolar bone height in maxillary sinus augmentation by 1-step technique. Conclusion: 1-step surgical procedure is a feasible option for patients with as little as 4mm residual alveolar bone height, when utilizing non-submerged, internal type implants with xenografts.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.118-122
• /
• 1987

The micelle formation of NaDC was studied by fluorometric and viscometric measurements. The thermodynamic parameters of the primary and secondary micellization of the bile salt were evaluated. The primary micelle formation was appeared to be an entropy driven process due to hydrophobic effect, while the major driving force for secondary micelle formation of the bile salt is the large negative enthalpy. The secondary micelle provides less hydrophobic environment to pyrene than the primary micelle does. The cooperative aggregation of primary micelles via hvdrogen bond formation was proposed for the secondary micelle formation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1192-1207
• /
• 2014

Dynamic spectrum sharing is a key technology to improve spectrum utilization in wireless networks. The elastic spectrum management provides a new opportunity for licensed primary users and unlicensed secondary users to efficiently utilize the scarce wireless resource. In this paper, we present a game-theoretic framework for dynamic spectrum allocation where the primary users rent the unutilized spectrum to the secondary users for a monetary profit. In reality, due to the ON-OFF behavior of the primary user, the quantity of spectrum that can be opportunistically shared by the secondary users is limited. We model this situation with the renewal theory and formulate the spectrum pricing scheme with the Bertrand game, taking into account the scarcity of the spectrum. By the Nash-equilibrium pricing scheme, each player in the game continually converges to a strategy that maximizes its own profit. We also investigate the impact of several properties, including channel quality and spectrum substitutability. Based on the equilibrium analysis, we finally propose a decentralized algorithm that leads the primary users to the Nash-equilibrium, called DST. The stability of the proposed algorithm in terms of convergence to the Nash equilibrium is also studied.

• East Asian Economic Review
• /
• v.23 no.3
• /
• pp.261-284
• /
• 2019

This paper explores the ramifications of international outsourcing on unemployment, income distribution and welfare, which is an important but yet unresolved issue. Using the well-known Harris-Todaro (1970) model of sector-specific unemployment, it shows that the effects of outsourcing on employment, income-distribution and welfare depend on the sector in which the outsourcing occurs, whereby sectoral factor intensities, unemployment-outsourcing response and the dynamic stability condition play crucial roles. In particular, outsourcing in the manufacturing (primary) sector widens (narrows) income inequality by increasing (decreasing) the sectoral wage gap and raising (not affecting) the rental income of the capital owners in the economy. Moreover, outsourcing in the manufacturing (primary) sector can be welfare-decreasing (is always welfare-increasing) due to its negative (positive) employment effect mitigating (reinforcing) the primary gains from the outsourcing.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.30.1-30.6
• /
• 2016

Background: The prognosis of wide implants tends to be controversial. While wider implants were initially expected to result in a larger osseointegration area and have higher levels of primary stability, they were reported to have a relatively high rate of failure. The clinical outcome of ultrawide implants of more than 6 mm in diameter was evaluated through a retrospective study. Methods: The investigation was conducted on patients who had received ultrawide implant (${\geq}6mm$ diameter) placements in Seoul National University Bundang Hospital from January 2008 to December 2013. Complications were investigated during the maintenance period, and marginal bone loss was measured using periapical radiography. Primary stability immediately after the implant placement and second stability after second surgery or during impression were measured using $Osstell^{(R)}$ Mentor (Osstell, Sweden) as an implant stability quotient (ISQ). Results: Fifty-eight implants were placed in 53 patients (30 male, 23 female), and they were observed for an average of $50.06{\pm}23.49$ months. The average ISQ value increased from $71.22{\pm}10.26$ to $77.48{\pm}8.98$ (P < 0.005). The primary and secondary stability shows significantly higher at the mandible than at the maxilla (P < 0.001). However, mean survival rate shows 98.28 %. Average marginal bone loss of 0.018 and 0.045 mm were measured at 12 and 24 months after the loading and 0.14 mm at final follow-up date (mean 46.25 months), respectively. Also in this study, the bone loss amount was noticeably small compared to regular implants reported in previous studies. Conclusions: The excellent clinical outcome of ultrawide implants was confirmed. It was determined that an ultrawide implant can be used as an alternative when the bone quality in the posterior teeth is relatively low or when a previous implant has failed.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.115-121
• /
• 2015

PURPOSE. This study aimed to evaluate the effect of implant thread depth on primary stability in low density bone. MATERIALS AND METHODS. The insertion torque was measured by inserting Ti implants with different thread depths into solid rigid polyurethane blocks (Sawbones) with three different bone densities ($0.16g/cm^3$, $0.24g/cm^3$, and $0.32g/cm^3$). The insertion torque value was evaluated with a surgical engine. The static compressive strength was measured with a universal testing machine (UTM) and the Ti implants were aligned at $30^{\circ}$ against the loading direction of the UTM. After the static compressive strength test, the Ti implants were analyzed with a Measurescope. RESULTS. The Ti implants with deeper thread depth showed statistically higher mean insertion torque values (P<.001). Groups A and group B had similar maximum static compressive strengths, as did groups C and D (P>.05). After the static compressive strength, the thread shape of the Ti implants with deeper thread depth did not show any breakage but did show deformation of the implant body and abutment. CONCLUSION. The implants with deeper thread depth had higher mean insertion torque values but not lower compressive strength. The deep threads had a mechanical stability. Implants with deeper thread depth may increase the primary stability in areas of poor quality bone without decreasing mechanical strength.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.101-111
• /
• 2001

Background: We analyze the functional evaluation, posterior stability after surgery of acute injuries in the femoral detachment and tibial avulsion fracture of posterior cruciate ligament. Materials and Methods: Twenty two patients who underwent primary repair were followed more than one year after operation (mean follow-up 33.7 months). The patients were evaluated with KT 2000 arthrometer and posterior stress test for posterior stability. Lysholm knee score was used for knee function. Results: Lysholm score revealed 85.3 in femoral detachment group and 91.1 in tibial avulsion fracture group (P<0.05). Posterior displacement of the posterior stress test showed 17.2 mm at initial injury and 8.6 mm at last follow up in femoral detachment group, 16.8 mm at initial injury and 7.1 mm at last follow up in tibial avulsion fracture group. There revealed the tendency of the improved posterior stability of the tibial avulsion group compared with femoral detachment group, but there showed no statistical significance in KT 2000 arthrometer and posterior stress x-ray. Conclusion: Functional results of tibial avulsion fracture group revealed the better outcome compared with femoral detachment group, but the degree of posterior stability in tibial avulsion fracture group showed no statistical significance in posterior stability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.14-17
• /
• 2007

Power system restoration following a massive blackout starts with re-energizing primary restorative transmission systems at first. The comparison of the TLCC(transmission line charging capacity) and the RPC(reactive power capability) of related black-start generator should be considered in this stage because overvoltage can be caused by self-excitation at the generator when the RPC is smaller than the TLCC. The RPC can be decided by two criteria. One is stator end core heating, and the other is steady state stability. RPC in steady state stability area has been found based on a synchronous reactance Xd. This paper presents RPC limit of salient pole machine which is different from that of non-salient pole machine in steady state stability area and shows derivation process about that.