• Proceedings of the KWS Conference
• /
• 1994.10a
• /
• pp.89-92
• /
• 1994

According to the industrial development welding technology is necessitated to develop in the direction of full automation, high efficiency, energy saving, and full safety. In this study, thus, a simple holder ampere controller for welding systems is developed and applied to arc welders and its capability is examined and tested. The results are as follows: 1. It has a simple structure, since the primary AC power for the welder can be directly control led using a triac. 2. It can control the electric power strength in several steps as well as on and off easily, since a small-sized variable resistance is installed in the small controller on the welding holder. 3. In real field applications a welding system with this controller increases the working efficiency greatly compare to the conventional arc welders without the system, because the controller can control the ampere onsite far from the main power supply. 4. It can reduce the probability of the electrical mishap due to electrical leakage, since the electricity is disconnected as soon as the switch is off or welding person's hand is taken off from the welder after the work or for rest. 5. It can control the welding depth in the beginning and do the crater treatment well in the ending of welding, since it always supplies the relevent amount of electrical current. Therefore, it can improve the mechanical properties of the welding zone.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.67-78
• /
• 2013

In this paper, We proposed an development method of application framework for using the precision time protocol(PTP) based on physical layer devices to synchronize clocks across a network with IEEE1588 capable devices. The algorithm was not designed as a complete solution across all conditions, but is intended to show the feasibility of such a for the PTP(Precision Time Protocol) based on time synchronization of heterogeneous network between devices that support in IEEE 1588 Standard application framework. With synchronization messages per second, the system was able to accurately synchronize across a single heavily loaded switch. we describes a method of synchronization that provides much more accurate synchronization in systems with larger networks. In this paper, using the IEEE 1588 PTP support for object-oriented modeling techniques through the 'application framework development Development(AFDM)' is proposed. The method described attempts to detect minimum delays, or precision packet probe and packet metrics. The method also takes advantage of the Tablet PC(Primary to Secondary) clock control mechanism to separately control clock rate and time corrections, minimizing overshoot or wild swings in the accuracy of the clock. We verifying the performance of PTP Systems through experiments that proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.127-133
• /
• 2010

In the paper, reactorless high efficiency boost DC/DC converter for EV is proposed. In proposed converter, improves efficiency because decrease power loss when the switches are turned on/off using zero current switching (ZCS) at all switch of primary full bridge. By replacing reactance ingredients of L-C resonance circuit for ZCS with leakage inductance ingredients of high frequency transformer, it reduces system size and expense because of not add special reactor. For validity verification of proposed converter, in the paper implements simulation using PSIM and perform experiment by making 5KW DC/DC converter. In experimental results, efficiency of proposed converter conformed superiority.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1391-1401
• /
• 2017

In this paper, a secondary resonance half-bridge dc-dc converter with an inductive output filter is presented. The primary side of such a converter utilizes asymmetric pulse width modulation (APWM) to achieve zero-voltage switching (ZVS) of the switches, and clamps the voltage of the switch to the input voltage. In addition, zero current switching (ZCS) of the output diode is achieved by a half-wave rectifier circuit with a filter inductor and a resonant branch in the secondary side of the proposed converter. Thus, the switching losses and diode reverse-recovery losses are eliminated, and the performance of the converter can be improved. Furthermore, an inductive output filter exists in the converter reduce the output current ripple. The operational principle, performance analysis and design equation of this converter are given in this paper. The analysis results show that the output diode voltage stress is independent of the duty cycle, and that the voltage gain is almost linear, similar to that of the isolation Buck-type converter. Finally, a 200V~380V input, 24V/2A output experimental prototype is built to verify the theoretical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3634-3641
• /
• 2012

This paper introduced a previous study which suggest ways to improve problems of drive control system of Ropeless Elevator when developing prior to commercialization of Ropeless Elevator. In particular, this study also manufactured motor, linear speed sensor and the miniature systems to study the implementation of the Ropeless Elevator drive. This study examined the problem of conventional PI controller through the speed control test and focused on the advanced controller based on disturbance observer for Ropeless Elevator drive. The results of this study confirmed the feasibility of the Ropeless Elevator and showed the satisfactory results of drive control techniques. This study also extracted many more problems that still need to be improved in the future for commercializing such as the sensor, high-performance controller, precision structures, safety devices and so on.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.143-149
• /
• 2022

PCS needs to freely switch AC and DC to connect the battery, external AC loads and renewable energy in both directions for energy efficiency. Whenever converting happens, power loss inevitably occurs. Minimization of the power loss to save electricity and convert it for usage is a very critical function in PCS. PCS plays an important role in the ESS(Energy Storage System) but the importance of stabilizing semiconductors on PCB(Printed Circuit Board) should be empathized with a risk of failure such as a fire explosion. In this study, the temperature variation inside PCS was reviewed by cooling fan on top of PCS, and the vibration characteristics of PCS were analyzed during truck transportation for reliability of the product. In most cases, a cooling fan is mounted to control the inner temperature at the upper part of the PCS and components generating the heat placed on the internal aluminum cooling plate to apply the primary cooling and the secondary cooling system with inlet fans for the external air. Results of CFD showed slightly lack of circulating capacity but simulated temperatures were durable for components. The resonance points of PCS were various due to the complexity of components. Although they were less than 40 Hz which mostly occurs breakage, it was analyzed that the vibration displacement in the resonance frequency band was very insufficient. As a result of random-vibration simulation, the lower part was analyzed as the stress-concentrated point but no breakage was shown. The steel sheet could be stable for now, but for long-term domestic transportation, structural coupling may occur due to accumulation of fatigue strength. After the test completed, output voltage of the product had lost so that extra packaging such as bubble wrap should be considered.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.21-27
• /
• 2009

As portable electronic systems being used more often, it becomes a more important issue to lengthen the lifetime of the power battery of the system, for instance, by developing batteries of a higher efficiency. A simple as well as practical method to lengthen the lifetime is to use multiple batteries that are connected in parallel. But in this paper we present a new idea in using multiple batteries, with which the residual energy of the battery can be used in the sense of recycling. The idea is based on a usual phenomenon that a battery cell that has been used until its voltage has dropped below a reference level may still have some residual energy, due to which the voltage can recover when the cell takes a rest for a while. As a practical realization scheme of this idea, a multi-cell configuration method with a cell selection switch is introduced, and its feasibility has been examined by performing experimental observations on the behavior of battery discharge. It has been found that the lifetime of an Alkaline primary battery cell can be lengthened approximately by one or two hours with the proposed method.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.560-565
• /
• 2005

This paper deals with the development of manually operated die used for the manufacture of octagonal boxes into two sets of automated die. In particular, theoctagonal boxes are used fur the switch boxes intended fur the cable conduit of buildings or f3r wiring connection. Manufacturing these boxes requires forming the materials using the primary press before they undergo 2nd through 6th processing by the press machine including the four sides of the octagonal outlet box and bending. Such complicated process hikes up labor cost, slows down production, and results in defect rate of $10\%$ or higher; hence the overall rise in manufacturing cost. Moreover, workers avoid this type of work due to the roar and vibration coming from the press and the risk of accident. To eliminate such phenomenon, a CAM die made by integrating five sets of die into one set of die and an automatic conveyor system were developed. As a result, unmanned work was realized with only two units of press and two sets of die; thus solving the problem of work being avoided and saving on manufacturing cost.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.517-527
• /
• 2021

This paper presents the phase-shift full-bridge DC-DC converter using the one-chip micom. The proposed converter primary is the full-bridge power topology that operates with the unipolar pulse-width modulation (PWM) by the phase-shift method, and the secondary is the full-bridge full-wave rectifier composed of four diodes. The control of proposed converter is performed by the one-chip micom and its MOSFET switches are driven by the bootstrap circuit. Thus the total system of proposed converter is simple. The proposed converter achieves high-efficiency using the resonant circuit and blocking capacitor. In this paper, first, the power-circuit operation of proposed converter is explained according to each operation mode. And the power-circuit design method of proposed converter is shown, and the software control algorithm on the micom and the feedback and switch drive circuits operating the proposed converter are described, briefly. Then, the operation characteristics of proposed converter are validated through the experimental results of a designed and implemented prototype converter by the shown design and implementation method in this paper. The highest efficiency in the results was about 92%.