• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.623-627
• /
• 1995

This paper deals with the process which automatically straightens the shaft whose straightness is over the tolerance. The developed straightening process is composed of the measuring module and the control module. In the measuring module, the deflection of each measuring point is automatically measured, and the press point and the reference press stroke is determined. In the control module, the springback is predicted by the observer using the calculated reference press stroke and on-line-measured force and deflection. Through a series of experiments, the validity of the proposed process was verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.806-809
• /
• 1996

The present development relates to an apparatus for loading or unloading a workpiece, and more particularly, to an apparatus for loading or unloading a workpiece from a press die or supplier An apparatus for loading or unloading a workpiece has been installed in a press in order to load or unload a workpiece from a press die. There has been known such a loading or unloading apparatus as the apparatus can feed a workpiece in not only the horizontal direction but also in the vortical direction. Press working system in automotive factories are now switching over to a transfer press work ing system. The current problem to be sieved immediately is to automate the existing manual press lines for the manpower saving and speedy production. “Automation system for press line”has just been developed to meet the above trend. The loader and unloader are development under the design concept for high performance, easy control and operational safety to meet the more extensive.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.521-524
• /
• 2006

Recently, densified pollet fuel from wood biomass is widely used at North America and Europe as a regenerable and clean carbon neutral bioenergy. High-pressure compaction of sawdust of several species of wood to form a densified fuel was studied. Calorific and elemental analysis were carried out to assess pellet fuels Hot-press process was adopted for compact ion of sawdust and compaction was performed under prescribed condition. Densified fuels were evaluated by its oven-dry density and fines after 5-minute shaking test. The target density and fines of densified fuels were over $1.2g/cm^3$ and below 0.5%, respectively. When the press-temperature is over $60^{\circ}C$ densified fuels with density over $1.2g/cm^3$ and with fines below 0.5% can be produced. And the pressure over $1000kgf/cm^2$ was effect ive for this production.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.3
• /
• pp.233-239
• /
• 2015

PURPOSE. This study aimed to evaluate the fit of zirconia ceramics before and after veneering, using 3 different veneering processes (layering, press-over, and CAD-on techniques). MATERIALS AND METHODS. Thirty standardized zirconia CAD/CAM frameworks were constructed and divided into three groups of 10 each. The first group was veneered using the traditional layering technique. Press-over and CAD-on techniques were used to veneer second and third groups. The marginal gap of specimens was measured before and after veneering process at 18 sites on the master die using a digital microscope. Paired t-test was used to evaluate mean marginal gap changes. One-way ANOVA and post hoc tests were also employed for comparison among 3 groups (${\alpha}$=.05). RESULTS. Marginal gap of 3 groups was increased after porcelain veneering. The mean marginal gap values after veneering in the layering group ($63.06{\mu}m$) was higher than press-over ($50.64{\mu}m$) and CAD-on ($51.50{\mu}m$) veneered groups (P<.001). CONCLUSION. Three veneering methods altered the marginal fit of zirconia copings. Conventional layering technique increased the marginal gap of zirconia framework more than pressing and CADon techniques. All ceramic crowns made through three different veneering methods revealed clinically acceptable marginal fit.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.56-62
• /
• 2011

In this study, a method for the press forming of rectangular aluminium tube has been proposed. Rectangular aluminium tube has high stiff as the cold steel which can be lighter over 30% weight. It is increased every year by being recycled over 80%. Press die consists of punch, wing-die and holder for aluminium tube bending. When punch is applied with aluminium tube, holder is operated as same punch and wing-die is rotated through hinge. Stress-strain relations and springback are considered by bending angle of aluminium tube. In this study, the behaviors on tubes of square aluminium and rectangular aluminium with different thickness and area are established by the analysis of $DEFORM^{TM}$-3D program. Reducing fuel consumption is expected by using the aluminium tube deformation and it becomes the lightweight through recycling.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.356-363
• /
• 2013

Mechanical molding press which is used for transformation process during semiconductor manufacturing process has structural deformations by pressure. If these deformations have over limit range, life of the press itself can be reduced and it will be exerted on a bad effect for quality of the semiconductor. In this research, the main plates and links of a press are analyzed in relation to the structural deformations caused by pressure excluding thermal deformations. After modifying the modeling, the analysis is performed again to determine optimal design of the press, and this design is introduced to ensure that most of the stresses on the main plates are within safe allowable limits. As a result, an optimal design method for the structure is investigated to produce the desired pressure even when the size of the main structure is minimized.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1501-1504
• /
• 2008

By applying sonic wave vibration technology in weight exercise equipment, we introduced an completely new concept of device into the fitness and medical industry creating a new trend. Sonic wave leg press exercise system which got over the limit of technology will be easily accessible not only by professional athletes but also by ordinary users and even minority groups such as disabled, elderly, children.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.11
• /
• pp.1531-1539
• /
• 2009

This study compared the nutritional value of canola (B. napa) and mustard (B. hirta) press cakes obtained from the biodiesel industry as ingredients for use in diets fed to broiler chickens. A total of 210, one-day old, male broiler chicks were randomly assigned to one of seven dietary treatments. The control diet was based on wheat and soybean meal and contained 15% canola meal. For the experimental diets, 5, 10 or 15% of the canola meal was replaced with an equal amount of either canola or mustard biodiesel press cake. Dry matter and neutral detergent fiber digestibility were significantly higher for birds fed diets containing either canola or mustard biodiesel press cake compared with canola meal. Dry matter and neutral detergent fiber digestibility of the canola biodiesel press cakes was higher than the mustard biodiesel press cakes. Ether extract digestibility and nitrogen retention were significantly higher for birds fed canola biodiesel press cake compared with canola meal and mustard biodiesel press cake. Body weight gain and feed intake did not differ between birds fed canola or mustard biodiesel press cake and canola meal. In addition, there was no significant difference in body weight gain or feed intake between birds fed diets containing canola or mustard biodiesel press cake. Feed conversion was significantly improved for birds fed either canola or mustard biodiesel press cake compared with canola meal. Mortality was unaffected by treatment. Since the performance of broilers fed canola biodiesel press cakes was essentially the same as that of broilers fed canola meal, it is difficult to justify a premium to be paid for canola biodiesel press cake over that paid for canola meal. In addition, there was no difference in the performance of broilers fed biodiesel press cake obtained from canola or mustard seed. As mustard seeds are generally available at a lower price than canola seed, there may be some incentive to use mustard rather than canola seed for producing biodiesel press cake for use in poultry production.

• Transactions of Materials Processing
• /
• v.25 no.4
• /
• pp.268-274
• /
• 2016

In the automotive seat industry, the use of a fine blanking press is important for manufacturing of high precision products. Among them, a gear part which is a main component of an automotive seat recliner is generally manufactured by fine blanking press. However, the use of conventional mechanical press has been increasing in manufacture of gear part because of low productivity of fine blanking press. In this study, new forming process is suggested to fabricate the gear part with high precision by using mechanical press. The effect of flow restriction die (FRD) which has the restriction of blank edge on dimensional accuracy is investigated by FE-analysis. FE-analysis results for different conditions of FRD indicated that FRD has high dimensional accuracy with the lowest roll-over and the highest perpendicularity of gear part. After application to fabrication of the gear part using mechanical press, the measured dimensional characteristic was compared with the required specification of final product. In addition, results of the performance test showed that the product fabricated by developed process satisfied the required strength and durability. The results show that the suggested forming process by using FRD and mechanical press can replace fine blanking on the viewpoint of dimensional accuracy and productivity.