• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.950-955
• /
• 2005

A automatic component inserting system for industrial PCB is developed in this paper. This system has not been developed in Korea. Most domestic companies produce PCB manually. This process requires highly-skilled staff. Therefor, we developed a PCB inserting system for automation of the process and improved productivity. There are low parts in this system; press, table, tool change and control part. A hybrid press cylinder with pneumatic and hydraulic is used in the press part. The table part consists of pneumatic actuators, stepping motors and ball-screw mechanism. In the tool change part, upper tools can be exchanged automatically for the inserting of various components. The control part consists of motor drivers, PLCs and power supply.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.24-31
• /
• 1998

The effects of DMDHEU alone and DMDHEU/Fluorochemical(FC) combined treatment on the physical properties of 75％/25％ cotton/polyester(CP) blended fabrics were investigated. FC water repellent and DMDHEU durable press finishes were applied in combination to CP fabrics to provide good water repellency as well as great durable press(DP) performance. The physical properties of the fabrics were evaluated by wrinkle recovery angle(WRA), DP performance, contact angle, demand wettability, and water repellency. The durable press/water repellent finished(DP/WR) CP fabrics show considerably improved WRA and DP performance. The DP/WR finishes do not change the water contact angie of polyester fibers significantly, while the DP finishes increase it. Both DP and DP/WR finishes increase the contact angle of cotton fibers. The water uptake amount increases in the following order : DP/WR cotton, DP/WR CP＜DP cotton, DP CP ＜ Control CP, Control cotton. The water uptake amount increases in the following order DP/WR CP, DP/WR cotton ＜DP cotton ＜DP CP＜Control CP, Control cotton. Considerable improvements for water repellency are imparted to the CP fabrics treated with DP/WR, and the level of improvement is not significantly different from that of the DP/WR cotton fabrics. These results lead to the conclusion that DP/YVR treatments a single pad bath on CP are effective finishes for improving both DP performance and water repellency.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.806-809
• /
• 1996

The present development relates to an apparatus for loading or unloading a workpiece, and more particularly, to an apparatus for loading or unloading a workpiece from a press die or supplier An apparatus for loading or unloading a workpiece has been installed in a press in order to load or unload a workpiece from a press die. There has been known such a loading or unloading apparatus as the apparatus can feed a workpiece in not only the horizontal direction but also in the vortical direction. Press working system in automotive factories are now switching over to a transfer press work ing system. The current problem to be sieved immediately is to automate the existing manual press lines for the manpower saving and speedy production. “Automation system for press line”has just been developed to meet the above trend. The loader and unloader are development under the design concept for high performance, easy control and operational safety to meet the more extensive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.816-819
• /
• 2000

Recently the styrofoam has been used fur material of press die pattern. The object of this research is to develope an automated laser system for manufacture of press die pattern which depends chiefly on handwork during its process. After converting 3-D CAD model into cross-sectional shape information, the unnecessary part of the section is vapored away by laser. The depth and width of cut are mainly under the control of laser power and beam feed rate. The optimum manufacturing conditions are obtained by preliminary experiments. It is necessary fur precise styrofoam pattern manufacturing to develope laser system which has sufficient motion accuracy and program or beam path generation and automatic control of this system.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.202-210
• /
• 2011

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most important, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at separate work stations, the lens productivity of the system for small lens is yet too low. The paper shows an improved structure of convective sequential system, the lens productivity of which is three times as many as the conventional convective system. To know the die internal temperature, numerical results are given using ANSYS. A new convective sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station of the system.

• 성인간호학회지
• /
• 제24권2호
• /
• pp.109-118
• /
• 2012

Purpose: This study was conducted to contribute on nursing practice for elderly people by identifying the effects of hand moxibustion and hand press pellet therapy on the alleviation of constipation. Methods: The data were collected from October to November, 2009, and the subjects included 39 elders (experimental group: 20, control group: 19) from a senior citizens center in B City who reported constipation. Experimental group received an intervention of hand moxibustion and hand press pellet therapy three times a week for six weeks (total: 18 times). Data about the number of defecations per week and constipation degree scores were collected one week after each treatment. Results: 1. The number of defecation in the experimental group were different from that of the control group (F=228.26, $p$ <.001). 2. The degree of reported constipation in the experimental group differed from the control group (F=170.59, $p$ <.001). Conclusion: Hand moxibustion and hand press pellet therapy was shown to be effective in alleviating the constipation of elderly people by increasing the number of defecation per week and reducing the constipation degree scores. These two interventions can thus be used for alleviating the constipation of elderly people, replacing the stool softener and enema.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.67-74
• /
• 2010

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most impotent, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at one work station, the cycle time for the system is yet too long. The paper shows an improved structure of radiant sequential system in which the heating and pressing and cooing of dies is done at individual work station so as to cut down the cycle time. To know the die internal temperature, numerical results are given using ANSYS. An experimental radiant sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station.

• 한국항행학회논문지
• /
• 제18권3호
• /
• pp.248-252
• /
• 2014

본 논문에서는 자동차 부품업체의 조립 공정에서 압입이나 볼트, 너트 체결에 주로 사용되는 프레스와 너트러너는 정밀도와 생산성 향상이 지속적으로 요구한다. 여러 대의 압입 시스템을 복합적으로 구성한 후 동기화를 통하여 일괄적인 제어를 수행하는 생산 시스템으로 시리얼 통신을 이용한 저속의 멀티 서보 프레스 시스템을 개발하였다. 그 결과로 정밀도와 생산성이 향상되었고 제품에 대한 품질향상을 이룰 수 있었다.

• 지역사회간호학회지
• /
• 제30권3호
• /
• pp.336-344
• /
• 2019

Purpose: This study tries to examine the effects of hand moxibustion and press pellet by applying them to male manufacturing workers with low back pain, and use them to develop nursing interventions for workers. Methods: The data were collected from August to October, 2018, and the subjects were 60 men, processed by using SPSS/WIN 21.0 to perform homogeneity test with $x^2$-, t-, and hypothesis tests with repeated measures, ANOVA and $Scheff{\acute{e}}$ test. Results: Hypothesis 1 that "the experimental group provided with hand moxibustion and hand press pellet would give lower scores for low back pain than the control group" was supported (F=78.71, p<.001). Hypothesis 2 that "the experimental group provided with hand moxibustion and hand press pellet would have a wider range of motion than the control group" was also supported (F=17.44, p<.001). Hypothesis 3 that "the experimental group provided with hand moxibustion and hand press pellet would give lower scores for depression than the control group," again, was supported (F=16.95, p<.001). Conclusion: Hand moxibustion and hand press pellet are effective in relieving low back pain for male workers, in increasing the range of motion, and in decreasing depression.