Journal of Advanced Navigation Technology (한국항행학회논문지)

The Korean Navigation Institute (한국항행학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Multi Servo Press System Development of Low Velocity Using Serial Communication

시리얼 통신을 이용한 저속의 멀티 서보 프레스 시스템 개발에 관한 연구

  • Yu, Hwan-Shin (Department of Automobile Mechanical Engineering, Howon University) ;
  • Park, Hyung-Bae (Department of Automobile Engineering, Gyeonggi College of Science and Technology)
  • 유환신 (호원대학교 자동차기계공학과) ;
  • 박형배 (경기과학기술대학교 자동차과)
  • Received : 2014.05.23
  • Accepted : 2014.06.20
  • Published : 2014.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, press and nut runner used in press-fit or tightening the bolts and nuts at assembling process of automobile parts companies continually demand accuracy and improved productivity. Simultaneous control of production systems through synchronization configuring of the combination multi press-fit system developed multi servo press system using the low-speed serial communication. As a result, the accuracy and the productivity is improved and product quality improvement could be achieved.

본 논문에서는 자동차 부품업체의 조립 공정에서 압입이나 볼트, 너트 체결에 주로 사용되는 프레스와 너트러너는 정밀도와 생산성 향상이 지속적으로 요구한다. 여러 대의 압입 시스템을 복합적으로 구성한 후 동기화를 통하여 일괄적인 제어를 수행하는 생산 시스템으로 시리얼 통신을 이용한 저속의 멀티 서보 프레스 시스템을 개발하였다. 그 결과로 정밀도와 생산성이 향상되었고 제품에 대한 품질향상을 이룰 수 있었다.

Keywords

References

  1. J. I. Jung and J. S. Yang, "Trend and prospect of thin film processing technology", Journal of the Korean Magnetics Society, Vol. 21, No. 5, pp. 185-191, 2011. https://doi.org/10.4283/JKMS.2011.21.5.185
  2. W. C. Oliver and G.M. Pharr, "Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments", International Journal of Materials Research., Vol. 7, No. 6, pp. 1563-1583, 1992.
  3. A. Bolshakov and G.M. Pharr, "Influence of pile-up on the measurement of mechanical properties by load and depth sensing indentation techniques", International Journal of Materials Research., Vol. 13, No. 4, pp. 1049-1058, 1998. https://doi.org/10.1557/JMR.1998.0146
  4. E. F. Yoh and Y. S. Lee, "Integrated analysis for the shrink fitted die with multi stress-ring of dissimilar materials", Journal of Korean Society for Precision Engineering, Vol. 18, No. 3, pp. 40-46, 2001.
  5. H. Y. Kim, C. J. Choi, C. Kim, and W. B. Bae, "A study on the prediction of teeth deformation of the automobile transmission part in warm shrink fitting process", Journal of Korean Society for Precision Enfineering, Vol. 23, No. 9, pp. 352-357, 2006.
  6. S. H. Jeong, M. Y. Yook, H. B. Lee and S. S. Do "A development of flexible press-fit machine using robot with Servo Press", Journal of Korea Society of Automotive Engineers, Vol. 9, No. 6, pp. 583-587, 2008.