Browse > Article

Development of a Convective Sequential Production System for Aspheric Lens  

Kuk, Kum-Hoan (Department of Control and Instrumentation Engineering and ERI, Gyeong-sang National Univ.)
Kim, Gab-Soon (Department of Control and Instrumentation Engineering and ERI, Gyeong-sang National Univ.)
Jung, Dong-Yean (Daeho Tech)
Publication Information
Abstract
The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most important, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at separate work stations, the lens productivity of the system for small lens is yet too low. The paper shows an improved structure of convective sequential system, the lens productivity of which is three times as many as the conventional convective system. To know the die internal temperature, numerical results are given using ANSYS. A new convective sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station of the system.
Keywords
Aspheric Lens; Press Molding; Sequential Production; Convective Method; Radiant Method;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Chong, D. Y. and Kuk, K. H., "Development of Robot System for Production of Glass Lens by Ultraprecise Control of Force and Temperature," Ministry of Knowledge Economy, pp. 6-9, 2009.
2 Kuk, K. H., Kim, K. S., and Chong, D. Y., "Temperature Analysis of the Production System for Aspherical Lens and Optimization of Production Conditions," Proceedings of the Korean Society for Precision Engineering Spring Conference, pp. 51-52, 2008.
3 Takaki, K., Yonemoto, T., Inoue, T. and Nakamura, S., "A Method for Forming an Optical Element and an Apparatus for Manufacturing the Same," Panasonic Co., Ltd., No. 10-0207170, 1999.
4 Tanioka, T., Masaki, H., Urusibata, K., Komiyama, Y., Kanamo, T. and Maszki, I., "Method and Apparatus for Press Forming Glass Products," Toshiba Machine Co., Ltd., No. 10-0193374, 1999.
5 Kim, J. Y., "ANSYS Heat Transfer Analysis," TaeSung Software & Engineering INC., pp. 264-269, 2002.
6 Kim, S. S., Lee, Y. C., Lee, D. G., Kim, H. J. and Kim, J. H., "Ultra-precision Grinding Optimization of Mold Core for Aspheric Glass Lenses using DOE and Compensation Machining," Journal of the Korean Society for Precision Engineering, Vol. 24, No. 6, pp. 45-50, 2007.   과학기술학회마을
7 Kim, W. B., Lee, S. J., Kim, Y. J. and Lee, E. S., "Ultra-precision Polishing Technique for Micro 3- Dimensional Structures using ER Fluids," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 12, pp. 134-141, 2002.   과학기술학회마을
8 Kim, S. H., Beak, K. Y., Kim, Y. N. and Yang, I. Y., "Defect Evaluation of Optical Lens by Resonent Ultrasound Spectroscopy," Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 1491-1495, 2004.