• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.57-61
• /
• 2015

This paper proposes a fast intra prediction algorithm for the High Efficiency Video Coding (HEVC). HEVC has 35 modes, such as DC mode, Planar mode, and 33 angular modes for the intra-prediction. To reduce the complexity and to support fast decision for intra prediction, this paper proposes a hierarchical mode decision method (HMD). The proposed HMD mainly focuses on how to reduce the number of prediction modes. The experimental results show that the proposed HMD can reduce the encoding time about 39.17% with little BDBR loss. On average, the proposed HMD can achieve the encoding time saving e about 14.13 ~ 19.37% compared to that of the existing algorithms with slightly increasing 0.01 ~ 0.42% BDBR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.1
• /
• pp.237-246
• /
• 2001

This study is to measure the creep coefficient by 3 days, 7 days and 28 days in the age when loading for the quality assessment of $350kgf/cm^2$ in the high-strength concrete. And it is to analyze the behavior of creep coefficient by applying the experimental data though the compressive strength test, the elastic modulus test and the dry shrinkage test to the ACI-209, AASHTO-94 and CEB/FIP-90, the prediction mode, and the basis of concrete structural design. Also it is to analyze the behavior of short-term creep coefficient during 91 days in the age when loading through the experiment by using the regression analysis, the statistical theory. As applying it to the long-term behavior during 365 days and comparing with the creep prediction mode and examining it, the result from the analysis of the quality of the concrete is as follows. As the result of comparison and analysis about the ACI-209, AASHTO-94 and CEB/FIP-90, the prediction mode, and the basis of concrete structural design, the normal Portland cement class 1 shows the approximate value with the prediction of GEE/PIP-90 and the basis of concrete structural design, but in case of the prediction of ACI-209 and AASHTO-94, there would be worry of underestimation in the application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.154-163
• /
• 2014

In this paper, there is suggested a fast intra prediction mode decision method in HEVC. To reduce the number of candidates in rough mode decision (RMD) process and rate-distortion optimization (RDO) process, the edge information and relative RMD cost are utilized. The experiment results show that the proposed method reduces encoding run-time by 26.81% with a negligible coding loss of 0.79% BD-rate on average.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.930-932
• /
• 2017

In this paper, prediction of progressive interlaminar fracture in curved composite laminates under mode I loading was described. The prediction of progressive interlaminar fracture in curved composite laminates was conducted using cohesive zone model(CZM) in ABAQUS V6.13. Interlaminar fracture toughness used as input parameters in CZM was obtained through mode I, mode II and mixed mode I/II tests. The behaviors of progressive interlaminar fracture for curved composite laminates showed a good agreement between experimental and numerical results.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.859-869
• /
• 2012

The Multi-view Video Coding (MVC) which is exploiting disparities between views has been developed to improve the coding efficiency of multi-view video. But MVC has a problem of having high computing complexities because of disparity estimation. This paper propose a fast mode decision for non-anchor picture to reduce the computational time of MVC. The proposed method uses two phases. Anchor pictures in hierarchical B picture structure have a higher correlation with prediction mode selection of non-anchor pictures, so in the first phase, prediction mode of non-anchor pictures is selected by exploiting the macro-block regions in anchor picture. In the second phase, we select a reference direction of inter prediction mode exploiting a higher correlation among reference directions of inter prediction modes of 7 block sizes. Experimental results show that the proposed method could save average about 44% in the encoding time with negligible coding efficiency losses.

• Journal of Information Processing Systems
• /
• v.11 no.1
• /
• pp.39-56
• /
• 2015

Continuous multi-interval prediction (CMIP) is used to continuously predict the trend of a data stream based on various intervals simultaneously. The continuous integrated hierarchical temporal memory (CIHTM) network performs well in CMIP. However, it is not suitable for CMIP in real-time mode, especially when the number of prediction intervals is increased. In this paper, we propose a real-time integrated hierarchical temporal memory (RIHTM) network by introducing a new type of node, which is called a Zeta1FirstSpecializedQueueNode (ZFSQNode), for the real-time continuous multi-interval prediction (RCMIP) of data streams. The ZFSQNode is constructed by using a specialized circular queue (sQUEUE) together with the modules of original hierarchical temporal memory (HTM) nodes. By using a simple structure and the easy operation characteristics of the sQUEUE, entire prediction operations are integrated in the ZFSQNode. In particular, we employed only one ZFSQNode in each level of the RIHTM network during the prediction stage to generate different intervals of prediction results. The RIHTM network efficiently reduces the response time. Our performance evaluation showed that the RIHTM was satisfied to continuously predict the trend of data streams with multi-intervals in the real-time mode.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.511-524
• /
• 2005

In this paper, we propose a novel hardware architecture for an intra-prediction, integer transform, quantization, inverse integer transform, inverse quantization, and mode decision module for the macroblock engine of a new video coding standard, H.264. To reduce the cycle of intra prediction, transform/quantization, and inverse quantization/inverse transform of H.264, a reduction method for cycle overhead in the case of I16MB mode is proposed. This method can process one macroblock for 927 cycles for all cases of macroblock type by processing $4{\times}4$ Hadamard transform and quantization during $16{\times}16$ prediction. This module was designed using Verilog Hardware Description Language (HDL) and operates with a 54 MHz clock using the Hynix $0.35 {\mu}m$ TLM (triple layer metal) library.

• Journal of Korea Multimedia Society
• /
• v.22 no.12
• /
• pp.1368-1375
• /
• 2019

In this paper, an prediction method is proposed for coding of depth pictures using spherical modeling. An spherical surface which has the least error from original depth values is modeled in a block. Pixels in the block are predicted through the parameters of the modeled spherical surface. Simulation results show that average prediction errors and entropy powers are improved to 30% and 200% comparing to the intra prediction of H.264/AVC, selection ratios of the proposed spherical modeling mode is more than 25%.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.19-24
• /
• 1999

Understanding of wear mode and prediction of wear rate of parts in sliding contact are very important in field of meterial design relating with wear resistant. This paper has been undertaken to analyze the possibility of elucidation of wear mode and prediction of wear rate for annealed steel in sliding contact using the X-ray diffraction. The sliding wear test with various velocities using pin-on-disc machine and the X-ray diffraction test on the worn surface have been carried out. The results have been shown that the magnitude of residual stress and half-value breadth on the worn surface have a good correlation with wear mode. The difference between before and after test of half-value breadth on worn surface has been shown to be exponential relation with wear rate in the same wear mode.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.601-604
• /
• 1999

We propose a new hierarchical motion estimator architecture that supports the advanced prediction mode of recent low bit-rate video coders such as H.263 and MPEG-4. In the proposed VLSI architecture, a basic searching unit (BSU) is commonly utilized for all hierarchical levels to make a systematic and small sized motion estimator. Since the memory bank of the proposed architecture provides scheduled data flow for calculating 8$\times$8 block-based sum of absolute difference (SAD), both a macroblock-based motion vector (MV) and four block-based MVs are simultaneously obtained for each macroblock in the advanced prediction mode. The proposed motion estimator gives similar coding performance compared with full search block matching algorithm (FSBMA) while achieving small size and satisfying the advanced prediction mode.