• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.561-568
• /
• 2003

Surface ozone concentrations are highly sensitive to meteorological variability. Therefore, in order to reveal the long-term changes in ozone due to the changes in precursor emissions, we need to remove the effects of meteorological fluctuations on the annual distribution of surface ozone. In this paper, the meteorologically adjusted trends of daily maximum surface ozone concentrations in two major Korean cities (Seoul and Busan) are investigated based on ozone data from 11 (Seoul) and 6 (Busan) sites over the period 1992 ∼ 2000. The original time series consisting of the logarithm of daily maximum ozone concentrations are splitted into long-term, seasonal and short-term component using Kolmogorov-Zurbenko (KZ) filter. Meteorological effects are removed from filtered ozone series using multiple linear regression based on meteorologcial variables. The long-term evolution of ozone forming capability due to changes in precursor emission can be obtained applying the KZ filter to the residuals of the regression. The results indicated that meteorologically adjusted long-term daily maximum ozone concentrations had a significant upward trend (Seoul: ＋ 3.02% yr$^{-1}$ , Busan: ＋ 3.45% yr$^{-1}$ ). These changes of meteorologically adjusted ozone concentrations represent the effects of changing background ozone concentrations as well as the more localized changes in emissions.

• 한국진공학회지
• /
• 제19권3호
• /
• pp.236-241
• /
• 2010

수열합성법을 이용하여 전구체 용액 농도에 따라 성장된 ZnO 나노막대의 특성에 대한 연구를 수행하였다. ZnO 씨앗층은 sol-gel법으로 코팅하였고, 그 위에 ZnO 나노막대는 전구체 용액 농도를 0.01 M에서 0.3 M로 변화하여 성장시켰다. FE-SEM (field-emission scanning electron microscopy), XRD (X-ray diffraction), PL (photoluminescence)을 사용하여 ZnO 나노막대의 특성 변화를 분석하였다. 전구체 용액의 농도가 증가함에 따라 ZnO 나노막대의 직경과 길이가 증가하였으며 광학적 특성이 향상되었다.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.380-384
• /
• 2003

The effects of the mole concentrations of precursor solution on the microstructure and dielectric properties of sol-gel deposited $Ba_{0.85}$S $r_{0.15}$Ti $O_3$(BST) thin films have been investigated. The films were of single perovskite phase with strong (100) preferred orientation when grown on LaNi0$_3$ buffered Pt/Ti/ $SiO_2$Si substrates using a diluted precursor solution. Variation of the precursor solution concentration resulted in a different microstructure and, in turn, affected the tunability of the sol-gel deposited films. It was observed that leakage currents increased asymmetrically for the negative and positive bias voltage with decreasing thickness. Overall results suggest that those BST films have acceptable properties f3r applications as room-temperature tunable elements.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.177-182
• /
• 2010

To synthesize $Gd_2O_3:Eu^{3+}$ phosphor, gadolinium-europium oxalate precursors were prepared from oxalic acid, NaOH or aqueous ammonia via coprecipitation method. The obtained precursors were heat-treated and then characterized by XRD, SEM and PL. The kinds and amounts of coprecipitant (NaOH or aqueous ammonia) were found to affect the powder morphology and properties of gadolinium-europium oxalate precursors. Two crystalline precursors and one amorphous precursor were synthesized. The nanometer-sized amorphous gadolinium-europium oxalate precursor was first prepared using the oxalate coprecipitation technique. The calcined powders obtained from the amorphous precursor were nearly spherical in shape, and a narrow size distribution was obtained. The NaOH coprecipitant was more effective in the preparation of nanometer-sized spherical powders. A thermal decomposition process was conducted for the three kinds of precursors. The photoluminescence property was also measured as a function of europium content, and concentration quenching occurred for samples with europium concentrations of over 10 mol%.

• 한국대기환경학회지
• /
• 제21권3호
• /
• pp.277-284
• /
• 2005

Catalytic oxidation of toluene in low concentrations was investigated over various supports. As the manganese oxides loading was increased, the conversion of toluene increased at a lower temperature. The 18.2 $wt\%$ $Mn/\gamma-Al_2O_3$ appeared to be the most active catalyst. Among the supports, $\gamma-Al_2O_3$ was more active than $TiO_2$ and $SiO_2$. Manganese oxide catalysts prepared from manganese nitrate precursor were better for complete oxidation of toluene than those prepared from manganese sulfate and chloride precursor because sulfate from manganese sulfate and chloride from chloride manganese remained even after the calcination by XRD (X-Ray Diffraction) analyses.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.277-282
• /
• 2013

This study is an experimental attempt to confirm the binder effect of zeolite coating on glass plate by heat treatment. As a result, zeolite was successfully formed with low concentratios of pressure, whose concentration was effective in 10% or more for thin film zeolite coating. And as the content of the binder (TEOS) in mixed coating solution was higher, the zeolite was fastened better on the surface. Above 5% content of the binder in the coating solution, TEOS hindered zeolite synthesis of the precursor and brought to zeolite capacity decrease. Furthermore, when the concentration of the precursor, sedimentation rate of the precursor was higher and the coating efficiency is reduced thereby. Therefore, the most effective concentrations of the precursor and TEOS in the coating solution was 10% and 5%, respectively. It was concluded that zeolite coating is produced by heat treatment method after dipping without hydrothermal synthesis.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.386-391
• /
• 2021

The formation of CaCO₃ in microalgal culture is investigated and applied for effective separation of microalgae. The presence of several cationic ions in the culture medium mediates the formation of 3 types of mineral precipitates depending on the concentration of mineral precursors, Ca²⁺ and CO₃^2-, amorphous nano-flakes, rhombohedral calcites, and spherical vaterites. While amorphous phased precipitates are formed for all concentrations of mineral precursor, only calcites are formed for 30 mM solutions of mineral precursor, and mixtures of calcites and vaterites are formed for 50 and 100 mM solutions of mineral precursor. The harvesting efficiency is also dependent on the concentration of the mineral precursor: from 90 % for 10 mM to 99 % for 100 mM after 60 mins' of gravitational sedimentation. The formation of nano-flakes on the surface of microalgal cells induces the flocculation of microalgae by breaking the stable dispersion. The negatively charged surface of the microalgal cell is compatible not only with nano-flake attachment but also with the growth of calcitic crystals in which microalgal cells are embedded.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.663-670
• /
• 2014

Diameter-controlled tin oxide nanofibers have been successfully prepared using electrospinning and a subsequent calcination process; their diameters, morphologies, and crystal structures have been characterized. The diameters of the as-spun nanofibers can be decreased by lowering the concentration of a polymer and a tin precursor in the electrospinning solution because of the decrease in the solution viscosity. The crystal structure of the nanofibers calcined at various temperatures from $200^{\circ}C$ to $800^{\circ}C$ has been proved to be the tetragonal rutile of tin oxide; crystallinity is improved by increasing the temperature. However, nanofibers with lower concentrations of tin precursor do not maintain their fibrous structures after calcination at high temperatures. In this study, the effect of the relationship between the precursor concentration and the calcination temperature on the diameter and the morphology of the tin oxide nanofiber has been systematically investigated and discussed.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1300-1305
• /
• 2018

The tunable electronic performance of the solution-processed semiconductor metal oxide is of great significance for the printing electronics. In current work, transparent thin-film transistors (TFTs) with indium-zinc oxide (IZO) were fabricated as active layer by a simple eco-friendly aqueous route. The aqueous precursor solution is composed of water without any other organic additives and the IZO films are amorphous revealed by the X-ray diffraction (XRD). With systematic studies of atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS) and the semiconductor property characterizations, it was revealed that the electrical performance of the IZO TFTs is dependent on the concentration of precursor solution. As well, the optimum preparation process was obtained. The concentrations induced the regulation of the electronic performance was clearly demonstrated with a proposed mechanism. The results are expected to be beneficial for development of solution-processed metal oxide TFTs.