• International Journal of Internet, Broadcasting and Communication
• /
• 제10권3호
• /
• pp.136-145
• /
• 2018

The disaster monitoring technique by combination of the measurement method and the fine precision of the sensor collecting the satellite-based information that can determine the displacement space is available in a variety of diagnostic information and the GIS/GNSS by first sensor it is being requested from them. Be large and that the facility is operated nationally distributed torsional displacement of the terrain and facilities caused by such natural disasters progress of various environmental factors and the surroundings. To diagnose this spatial information, which contains the various sensors and instruments tracks the precise fine displacement of the main construction structures and the first reference in the Geospatial or more three-dimensional detailed available map and location information using the installed or the like bridges and tunnels produced to a USN/IoT change at any time, by combining the various positioning analysis of mm-class for the facility main area observed is required to constantly in the real time information of the USN/IoT environment sensor, and to utilize this as a precise fine positioning information by UAV/Drone to the precise fine displacement of the semi-permanent infrastructures. It managed to be efficient management by use of new technologies, analyzing the results presented to a method capable of real-time monitoring for a large structure or facility to construction disaster prevention.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.147-153
• /
• 2018

저전력 블루투스(BLE; Bluetooth Low Energy) 기술을 사용한 비콘은 실외에서만 위치 측위가 가능한 GPS(Global Positioning System)와 달리 실내에서도 위치 파악이 가능하다. 비콘을 사용한 실내 거리 측정에는 RSSI(Received Signal Strength Indication)값이 핵심 요소인데 그에 반해 RSSI값은 여러 환경요소로부터 영향을 받기 때문에 예측된 거리와 실제 거리의 오차가 크게 나타난다. 이러한 이슈를 다루기 위해 비콘을 사용한 ANN(Artificial Neural Network)기반 적응형 거리 측정을 제안한다. 먼저 RSSI의 잡음을 줄이기 위해 확장 칼만 필터와 신호 안정화 필터를 사용한 전처리 과정을 거친다. 그리고 각각 특정 학습 데이터 셋을 가진 다층 ANN들은 학습을 거치게 된다. 결과에서는 평균오차 0.67m를 보여주고, 0.78의 precision을 보여준다.

• 한국융합학회논문지
• /
• 제9권5호
• /
• pp.145-150
• /
• 2018

공작기계의 주축은 황삭 가공에서 부터 정삭가공에 이르는 다양한 작업들이 가능해야 하고, 정속운동 또는 회전 위치결정의 기능을 수행해야 되므로 주축설계에 고려해야 할 변수들이 많다. 주축이동식자동선반은 고정식자동선반에 비해 샤프트가 가늘고 긴 핀 들을 작업할 때 좋은 선반이다. 고정식 자동선반에 비해 외경가공의 밀도가 매우 높다. 주축 이송형 선반은 주로 소형 제품을 정밀가공 할 경우에 사용되므로 가공 정밀도가 높아야 한다. 최대 외경 가공 한계 치수는 Ø32, 내경가공 한계 치수는 Ø6까지 가공이 가능하게 제작되어야 한다. 본 연구에서는 주축이동식 자동선반에 사용되는 SCM440 소재의 정 동적특성을 이동식 선반에 적용하여 분석하였다. 주축의 정,동적 특성에 영향을 미치는 인자들을 고려하여 고속화 및 고정밀도를 갖는 최적설계기술이 확보하기 위하여 수치해석을 이용하여 분석하였다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.48-54
• /
• 2017

A minimum turning circle test of vehicles is operated by using Real-Time Kinematic(RTK) surveying method which enhances the precision of the Global Positioning System(GPS). A procedure of the conventional method to obtain results is to take post processing after the test. Therefore, it is difficult to ensure results in an instant. This paper introduces developed process and equipment that can immediately obtain results after the minimum turning test without post processing.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.11-14
• /
• 2007

An additive servo-system is developed to improve straightness of linear motor stages. For linear motor stages used in the field of high-precision linear motion process, high straightness accuracy is necessary as well as positioning accuracy in the longitudinal axis. In such cases, machining and assembling cost increases to improve the straightness accuracy. An electro-magnetic actuator which is relatively cost effective than any other conventional servo-systems is suggested to compensate the fixed straightness error. To overcome the compensation error due to modeling error and friction disturbance, a sliding mode control is addressed. The effectiveness of the suggested mechanism and the control are illustrated along with some experimental results.

• 전자통신동향분석
• /
• 제35권5호
• /
• pp.14-29
• /
• 2020

The 6G mobile communication system will become a backbone infrastructure around 2030 for the future digital world by providing distinctive services such as five-sense holograms, ultra-high reliability/low-latency, ultra-high-precision positioning, ultra-massive connectivity, and gigabit-per-second data rate for aerial and maritime terminals. The recent remarkable advances in machine learning (ML) technology have recognized its efficiency in wireless networking fields such as resource management and cell-configuration optimization. Further innovation in ML is expected to play an important role in solving new problems arising from 6G network management and service delivery. In contrast, an approach to apply ML to a physical-layer (PHY) target tackles the basic problems in radio links, such as overcoming signal distortion and interference. This paper reviews the methodologies of ML-based PHY, relevant industrial trends, and candiate technologies, including future research directions and standardization impacts.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.361-367
• /
• 2014

Ultra-precision positioning plays a crucial role in emerging technologies such as electronics, bioengineering, optics, and various nanofabrication technologies. As a result, various nanopositioning methods have been presented. In particular, nanopositioning using a flexure mechanism and piezo-electric actuator is one of the most valuable methods because of its friction-free motion and subnanometer-scale motion resolution. In this study, a rotational nanoactuator based on a right-circular flexure mechanism and piezo-electric actuator was developed through a consideration of the kinematics and structural deformation. An experimental setup was constructed to verify the performance expectation. Consequently, it was demonstrated that the developed system had a maximum rotational angle of about 0.01 rad, as well as sufficient linearity with respect to the input voltage.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.31-37
• /
• 2003

This paper presents a measurement system of mechanical property using dual servo system. There are many kinds of method to measure material properties such as tensile test, indention and bending test. It is highly required to measure the properties of nano-sized material and structure. However, It is need more accurate measurement system, more stable and frequency response than conventional test. In this paper, we designed the dual servo system for a measuring instrument The dual servo system consisting of a coarse stage and a fine motion stage with VCM and PZT is proposed. Mechanical mechanism is designed with the leaf spring type of flexure hinge joint. Lead compensator is applied to this control system, and is designed by PQ method.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.351-361
• /
• 2001

In this paper, a generalized framework called as robust internal-loop compensator(RIC) is presented, and by using this, a structural design method of sliding of sliding mode controller is proposed. First, a general sliding mode controller is derived and a stabilizing control input is designed based on Lyapunov redesign for the system in the presence of uncertainty and disturbance. And adopting the internal model following control, RIC is proposed. Next, using the structural characteristics of the proposed RIC, disturbance attenuation characteristics are analyzed and the performance of the closed-loop system is predicted. Through this analysis, it is shown that if the control gain of RIC is increased by N times, the magnitude of error is reduced to its 1/N. the proposed method is verified through experiments using a high-precision positioning system and the performance is evaluated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.440-445
• /
• 2011

Dynamic characteristic analysis is required in developing SMT mounter system with high installation speed and position precision, because of vibration source occurred by positioning head. This paper presents the method of improving dynamic characteristic of SMT(Surface Mount Technology) mounter with finite element method and modal test. The design direction is that natural frequencies of SMT mounter must be higher than the vibration source. In addition, the effect of input shaping on residual vibration reduction is investigated by simulating the response of a first-order system.