• 대한치과교정학회지
• /
• 제34권3호
• /
• pp.219-227
• /
• 2004

본 연구의 목적은 치아의 이동양상을 관찰하기 위해 고안된 Calorific machine system(typodont simulation system)과 precision TPA를 이용하여, 근심 회전된 (mesial-in rotation) 상악 대구치를 회전 (derotation)시킨 후 해당 치아 및 반대측 고정 원의 공간변화를 확인하기 위함이다. 우측 상악 제 1대구치를 고정원으로 사용하였고 좌측 상악 제 1대구치를 근심 회전된 치아로 사용하였으며, TPA에 부여한 회전각은 $20^{\circ},\;40^{\circ},\;60^{\circ}$였다. 먼저 수동형의 precision TPA를 제작한 후, TPA의 왼쪽 삽입부위(tag)를 각각 $20^{\circ},\;40^{\circ},\;60^{\circ}$로 구부려 실험하였다. 각 군별 실험은 동일한 조건에서 5회 반복한 후 ANOVA와 Tucky's Studentized Range (HSD) test로 검정 하였다. 실험 결과, 교합면에서는 precision TPA의 구부리는 각도가 증가할수록 회전된 구치의 원심 설측 교두가 근심 설측 방향으로 움직이는 동안, 근심 협측 교두는 협측으로 더 많이 움직였고(p<0.001) 원심방향으로는 더 적게 움직였다. (p<0.001) 시상면에서 회전 구치의 구개측 치근은 더욱 근심으로 움직였다. (p<0.001) 횡단면에서는 회전된 치아가 약간의 정출을 보였다(p<0.001). 고정원으로 사용된 우측 상악 제1대구치는 세 평면에서 의미 있는 변화를 보이지 않았다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.117-124
• /
• 2008

In early design stage, the simulation of interior noise is useful for the enhancement of the noise, vibration and harshness (NVH) performance in a vehicle. The traditional transfer path analysis (TPA) technology cannot simulate the interior noise since it uses the experimental method. In order to solve this problem, in this paper, the hybrid TPA is developed as the novel approach. The hybrid TPA uses the simulated excitation force as the input force, which excites the flexible body of a car at the mount point, while the traditional TPA uses the measured force. This simulated force is obtained by numerical analysis for the FE (finite element) model of a powertrain. The interior noise is predicted by multiplying the simulated force by the vibro-acoustic transfer function (VATF) of the vehicle. The VATF is the acoustic response in the compartment of a car to the input force at the mount point of the powertrain in the flexible car body. The trend of the predicted interior noise based on the hybrid TPA very well corresponds to the measured interior noise, although there is some difference due to not only the experimental error and the simulation error but also the effect of the air-borne path.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.107-116
• /
• 2008

The excitation force of a powertrain is one of major sources for the interior noise of a vehicle. This paper presents a novel approach to predict the interior noise caused by the vibration of the power rain by using the hybrid TPA (transfer path analysis) method. Although the traditional transfer path analysis (TPA) is useful for the identification of powertrain noise sources, it is difficult to modify the structure of a powertrain by using the experimental method for the reduction of vibration and noise. In order to solve this problem, the vibration of the power rain in a vehicle is numerically analyzed by using the finite element method (FEM). The vibration of the other parts in a vehicle is investigated by using the experimental method based on vibrato-acoustic transfer function (VATF) analysis. These two methods are combined for the prediction of interior noise caused by a power rain. Throughout this research, two papers are presented. This paper presents a simulation of the excitation force of the power rain exciting the vehicle body based on numerical simulation. The other paper presents a prediction of interior noise based on the hybrid TPA, which uses the VATF of the car body and the excitation force predicted in this paper.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.425-433
• /
• 1999

회전된 구치를 개선시키기 위해 사용하는 precision-TPA(transpalatal arch)를 삽입 방법들-근심삽입법, 원심삽입법, 확장력을 부여한 근심삽입법(이하 근심확장법) -에 따라 동적인 치아이동의 양상과 치열궁의 변화를 비교하기 위해 본교실에서 개발, 제작한 Calorific machine을 이용하여 실험한 후 회전된 치아와 고정치간의 이동양상을 계측하여 통계처리한 결과 다음과 같은 결론을 얻었다. 1. 구치간 폭경은 근심삽입법에 의해 감소하였고, 원심삽입법과 근심확장법에 의해서는 증가하였다. 2. 원심삽입법에 의해서 치열궁 장경이 가장 증가하였고, 근심확장법, 근심삽입법 순으로 증가하였다. 3. 근심삽입법의 회전중심은 근심소와(mesial pit)와 중심소와(central pit)사이에 위치하였고, 원심삽입법에서는 원심소와(distal pit)와 원심설측교두(distolingual cusp)사이에, 근심확장법은 원심소와(distal pit)에 위치하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1365-1368
• /
• 2004

A scheme to control the laser power and the exposure time was studied to fabricate precise microstructures using the nanostereolithography (nSL) process. Some recent works have shown that a three-dimensional (3D) microstructure can be fabricated by the photopolymerizing process which is induced by two-photon absorption (TPA) with a femtosecond pulse laser. TPA provides the ability to confine photochemical and physical reactions within the order of laser wavelength, so neardiffraction limit features can be produced. In the nSL process, voxels are continuously generated to form a layer and then another layer is stacked in the normal direction of a plane to construct a 3D structure. Thus, fabrication of a voxel with low aspect ratio and small diameter is one of the most important parameters for fabricating precise 3D microstructures. In this work, the mechanism of a voxel formation is studied and a scheme on the control of laser power and exposure for minimizing aspect ratio of a voxel is proposed.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.36-40
• /
• 2009

Development of maskless lithography techniques can provide a potential solution for the photomask cost issue. Furthermore, it could open a market for small scale manufacturing applications. Since femtosecond lasers have been found suitable for processing of a wide range of materials with sub-micrometer resolution, it is attractive to use this technique for maskless lithography. As a femtosecond laser has recently been developed, both of high power and high photon density are easily obtained. The high photon density results in photopolymerization of photoresist whose absorption spectrum is shorter than that of the femtosecond laser. The maskless lithography using the two-photon absorption (TPA) makes micro structures. In this paper, we present a femtosecond laser direct write lithography for submicron PR patterning, which show great potential for future application.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.175-182
• /
• 2005

A laser beam expanding technique is employed to fabricate precise nano-patterns in a nano-replication printing (nRP) process. In the nRP process, some patterns can be fabricated in the range of several microns inside on a polymerizable resin by using a volume-pixel (voxel) matrix that is transformed from a two-tone bitmap figure file. The liquid monomers are polymerized by means of a two-photon-absorption (TPA) phenomenon that is induced by a femtosecond (fs)-pulse laser. The yokels are generated consecutively to merge into adjoining yokels in the process of fabricating a pattern. The resolution of a fabricated pattern can be obtained under the diffraction limit of a laser beam by the two-photon absorbed polymerization (TPP). In this work, a beam-expanding technique has been applied to enlarge a working area and to fabricate precise patterns. Through this work, a working area is expanded by the technique as much as 2.5 times compared with a case of without a beam expanding technique, and precision of outside patterns is improved.

• 폴리머
• /
• 제28권4호
• /
• pp.305-313
• /
• 2004

본 연구는 나노 복화공정을 이용하여 마이크로 혹은 나노공정에 응용이 가능한 형상모형 제작공정 개발과 폴리디메틸실록산 (polydimethylsiloxane)를 이용하여 만들어진 형상모형의 몰드로 나노급 정밀도의 폴리디메틸실록산 형상을 복제하는 공정에 관한 것이다. 본 연구에서 제안한 나노 복화공정은 복잡한 형상모형 (pattern)이나 2차원 형상을 CAD 파일 없이 비트맵 그림파일을 이용하여 직접적으로 200nm 정밀도를 가지는 형상으로 만들 수 있다. 형상모형은 펨토초 레이저를 이용하여 이광자 흡수 중합법으로 제작하기 때문에 형상의 정밀도는 레이저 범의 회절한계 이하로 얻을 수 있다. 이렇게 제작된 마스터 형상모형은 본 연구에서 제안한 진공압력차이법으로 폴리디메틸실록산 몰드를 제작하여 기존의 제작방법에 비하여 정밀한 제작이 가능함을 보였으며 또한 제작된 몰드를 이용하여 양각의 플리디메틸실록산 스탬프를 제작하였다.