• Title/Summary/Keyword: Pre-rejection

Search Result 64, Processing Time 0.029 seconds

Drinking Water Treatment of Surface Water Using Microfiltration-Nanofiltration Processes (정밀여과 및 나노여과 공정을 이용한 지표수의 상수처리)

  • Lee, Sung-Woo;Kim, Chung-Han;Kwak, Dong-Heui
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.14 no.3
    • /
    • pp.224-230
    • /
    • 2000
  • Membrane processes are capable of removing much materials from water. The removal or rejection characteristics of a membrane is usually depend upon the nominal pore size or MWCO(molecular weight cut off). A membrane with a smaller nominal pore size or MWCO should be capable of removing smaller contaminants from water. A series of experiments was performed to investigate the separation characteristics of membrane processes which consisted of microfiltration(MF) and nanofiltration(NF). To evaluate removal efficiencies of some pollutants such as the consumption of $KMnO_4$, THMFP, NH3-N, Fe, Mn, and pesticides, source water sampled from the Kum river was treated by the those membrane processes. Also, the results of experiments were compared with those of conventional water treatment processes. By two types of the membrane process, total removal efficiency of $KMnO_4$ consumed, THMEP, and $NH_3-N$ were 91.0%, 84.3%, and 85.5%, respectively and those processes were efficient in pesticides removal as well. Most of the effluents satisfied the Korean standard of drinking water quality continuously in the experimental periods. However, NF was needed for producing the safe drinking water in case of treating the raw water contaminated with Mn since removal efficiency of MF was not high enough. On the basis of the experimental results, it was suggested that NF could be applied to remove not only $NH_3-N$ but THMFP even without pre-chlorination.

  • PDF

Development of a 32 Channel EEG and Evoked Potential Mapping System (32채널 뇌파 및 뇌유발전위 Mapping 시스템 개발)

  • Ahn, C.B.;Yoon, G.B.;Park, D.J.;Yoo, S.K.;Lee, S.H.;Ham, Y.J.;Kang, M.J.;Kim, D.J.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1995 no.11
    • /
    • pp.86-89
    • /
    • 1995
  • A clinically oriented 32 channel Electroencephalogram (EEG) and evoked potential (EP) mapping system has been developed. The EEG and EP signals acquired from 32-channel electrodes are amplified by the pre-amplifier located near patient and are then tither amplified by main amplifier. An automatic artifact rejection scheme is employed using a neural network by which examination time is reduced substantially. Auditary and visual stimuli are used for the evoked potential mapping. A user-friendly graphical interface based on the Microsoft Window 3.1 is developed for the operation of the system. Statistical databases for the poop and individual comparisons are also included to support statistically based diagnosis.

  • PDF

Optimum Parameter Values for A Metal Plating Process (금속도금공정에서의 최적 모수 값 결정)

  • Kim, Young-Jin;Hong, Sung-Hoon;Lee, Min-Koo;Kwon, Hyuck-Moo
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.34 no.3
    • /
    • pp.337-343
    • /
    • 2008
  • The problem of determining the optimum metal plating thicknesses on the plane and curved surfaces of an electronic part is considered. A lower specification limit for the plating thickness is usually pre-specified. In most applications, the plating thickness on the curved surface is proportional to that on the plane surface. The proportion can be adjusted by adding chemical catalysts to the plating fluid. From the economic point of view, nonconforming items with a thickness smaller than the lower specification limit incur rejection costs, such as rework and scrap costs, while a thicker plating may incur an excessive material costs. In this article, an economic model is proposed for simultaneously determining the target plating thickness and the ratio of the plating thickness on the plane surface to that on the curved surface. An illustrative example demonstrates the applicability of the proposed model.

Pre-treatment of textile wastewaters containing Chrysophenine using hybrid membranes

  • lehi, Arash Yunessnia;Mousavirad, Seyed Jalaleddin;Akbari, Ahmad
    • Membrane and Water Treatment
    • /
    • v.8 no.1
    • /
    • pp.89-112
    • /
    • 2017
  • Dyeing wastewaters are the most problematic wastewater in textile industries and also, growing amounts of waste fibers in carpet industries have concerned environmental specialists. Among different treatment methods, membrane filtration processes as energy-efficient and compatible way, were utilized for several individual problems. In this research, novel hybrid membranes were prepared by waste fibers of mechanical carpets as useful resource of membrane matrix and industrial graphite powder as filler to eliminate Chrysophenine GX from dyeing wastewater. These membranes were expected to be utilized for first stage of hybrid membrane filtration process including (adsorption-ultrafiltration) and nanofiltration in Kashan Textile Company. For scaling of membrane filtration process, fouling mechanism of these membranes were recognized and explained by the use of genetic algorithm, as well. The graphite increased rejection and diminished permeate flux at low concentration but in high concentration, the performance was significantly worsened. Among all hybrid membranes, 18% wt. waste fibers-1% wt. graphite membrane had the best performance and minimum fouling. The maximum pore size of this optimum membrane was ranged from 16.10 to 18.72 nm.

Nonlinear Controller for the Velocity Tracking and Rejection of Sinusoidal Disturbances in Permanent Magnet Stepper Motors (영구 자석 스테퍼 모터의 속도 추종과 외란 제거를 위한 비선형 제어기)

  • Kim, Won-Hee;Gang, Dong-Gyu;Han, Jonh-Pyo;Chung, Chung-Choo
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.60 no.3
    • /
    • pp.632-638
    • /
    • 2011
  • In this paper, a nonlinear controller is proposed to track the desired velocity and to cancel sinusoidal disturbances. The proposed method consists of a velocity tracking controller and internal model principles (IMPs). For the design of the velocity tracking controller, mechanical and electrical dynamic controllers are independently designed. For the mechanical dynamics, the velocity tracking controller generates the desired quadrature current to track the desired velocity. The current tracking controller is designed to guarantee the desired quadrature current and to regulate the direct current. Therefore, the proposed velocity tracking controller has a field-oriented control. Since the controllers of the mechanical and electrical dynamics are independently designed, the stability of the closed-loop system is demonstrated using passivity. Since both the cogging torque and DC current errors act as sinusoidal disturbances in PMSM, we use four add-on type IMPs that preserve the merits and performance of the pre-designed controller without sacrificing the closed-loop stability. The performance of the proposed method is validated via simulations.

Planning of HVDC System Applied to Korea Electric Power Grid

  • Choi, DongHee;Lee, Soo Hyoung;Son, Gum Tae;Park, Jung-Wook;Baek, Seung-Mook
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.1
    • /
    • pp.105-113
    • /
    • 2018
  • This paper proposes pre-analysis on planning of high-voltage direct current (HVDC) transmission system applied to Korea electric power grid. HVDC transmission system for interface lines has been considered as alternative solution for high-voltage AC transmission line in South Korea since constructing new high-voltage AC transmission lines is challenging due to political, environmental and social acceptance problems. However, the installation of HVDC transmission system as interface line in AC grid must be examined carefully. Thus, this paper suggests three scenarios to examine the influences of the installation of HVDC transmission system in AC grid. The power flow and contingency analyses are carried out for the proposed scenarios. Power reserves in metro area are also evaluated. And then the transient stability analysis focusing on special protection scheme (SPS) operations is analyzed when critical lines, which are HVDC lines or high voltage AC lines, are tripped. The latest generic model of HVDC system is considered for evaluating the impacts of the SPS operations for introducing HVDC system in the AC grid. The analyses of proposed scenarios are evaluated by electromechanical simulation.

Effect of Antibody Titer on Xenograft Survival in Pig-To-Dog Heterotopic Cardiac Xenotransplantation -Opening of Xenotrasplantation Era- (돼지\longrightarrow개 이소이종심장 이식모델에시 생존에 미치는 항체 역가의 영향 -이종이식시대의 개막-)

  • 이정렬;김희경;김지연;최대영;이재형;위현초;강희정;김영태;강병철
    • Journal of Chest Surgery
    • /
    • v.37 no.5
    • /
    • pp.391-400
    • /
    • 2004
  • Xenotransplantation in discordant species results in immediate and irreversible hyperacute rejection due to natural antibodies, IgM. With this, antibody depletion is one option to reduce hyperacute rejection, we investigated the effect of PCPP (postcentrifugal plasmapheresis) on the depletion of natural antibodies and the effect of antibody titer on xenograft survival. Material and Method: Outbred swines (n=4) weighing 10∼20 kg were used as donors and mongrel dogs (n=4) weighing 25∼30 kg were used as recipients. Recipient canines underwent plasmapheresis (COBE TPE Laboratories, Lakewood. CO, USA). Pre-transplantation PCPP was peformed on day -2 and day 0. There were three groups (Group 0: no PCPP, Group 1: 1 pla sma-volume (PV) at day -2 and 2 PV at day 0, Group 2: 2 PV at day -2 and 2 PV at day 0). A swine heart was heterotopically transplanted into a recipient's abdominal infrarenal aorta and inferior vena cava. Mean percent depletion of total IgM and IgG in plasma of the recipients was calculated. Serum albumin, electrolyte, complement activity and coagulation factors were measured. Histopathologic examination of heart specimens was performed. Result: Mean percent depletion of IgM and IgG were 95.7$\pm$1.2%, 80.5$\pm$2.4% in the group 2 at the end of PCPP. The percent depletion of serum albumin concentration was decreased from 2.8 to 1.4 g/㎗ in the group 1 and 3.0 to 1.5 g/㎗ in the group 2. Complement hemolytic activity was decreased in group 1 and 2, but returned to normal level within 24 hours. Complement hemolytic activity was reduced to 10% of pre-PCPP level in group 2. Serum fibrinogen decreased to 20% or less and was recovered within 24 hours in group 2. Antithrombin III decreased but less than fibrinogen. PT and aPTT were sometimes but not always prolonged during plasmapheresis. After plasmapheresis, PT and aPTT were prolonged beyond the measurable level. D-dimer was not found during PCPP, but appeared and maintained from 10 minutes after trasplantation. Graft Survival time was 5 min in group 0, and it was 90$\pm$0 min in the group 2. Histopathologic changes were more typically characterized by edema, hemorrhages, thrombosis in all groups at the end of experiment. Conclusion: PCPP effectively removed immuoglobulins and reduced the titer of natural antibodies, as a result, significantly prololonged swine heart xenograft survival.

Development of Microbubble Flotation Technique for the Production of High Grade Coal (Microbubble Flotation에 의한 고품위(高品位) 석탄생산(石炭生産) 기술(技術) 개발(開發))

  • Han, Oh-Hyung;Park, Sin-Woong;Kim, Byoung-Gon
    • Resources Recycling
    • /
    • v.21 no.4
    • /
    • pp.44-52
    • /
    • 2012
  • The purpose of this study is to confirm the possibility of obtaining high grade coal from fixed carbon 20.68% coal. Also, the mineralogical, physical/chemical and liberation characteristics was found with the aim of decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and microbubble column flotation that was appropriate for the processing of fine particles was used with the variation in kinds and quantity of frother, collector and depressant. Also grinding time, air flow rate and feeding rates were examined. As a result of batch flotation, using pulp density 20%, collector DMU-101+dodecyl amine(100 mL/ton), frother pine oil (200 mL/ton), depressant sodium silicate(1 kg/ton), obtained the result of ash rejection 81.55% and combustible recovery 70.23%. In result of microbubble column flotation, the result was ash rejection 83.85% and combustible recovery 70.42% under the condition of pulp density 5%, grinding time 5 min. collector DMU-101+DDA(100 mL/ton), frother AF65(5.4 L/ton), depressant SMP(3.5 kg/ton), wash water(360 mL/min.) and air flow rate(1,197 mL/min.).

Flotation for Improving Grade of Domestic Fine Coal (국내산(國內産) 미립(微粒) 석탄(石炭)의 품위향상(品位向上)을 위한 부유선별(浮遊選別) 연구(硏究))

  • Han, Oh-Hyung;Kim, Min-Gyu;Kim, Byoung-Gon
    • Resources Recycling
    • /
    • v.22 no.6
    • /
    • pp.64-72
    • /
    • 2013
  • The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

Changes of Serum IgM, IgG in Pig's Xenograft Perfusion and Immunofluorescence Changes of the Deposition of IgM, IgG in the Xenograft in Dogs (잡종견에서 돼지 신장과 폐를 이용한 혈액관류에서 수술 전.후 혈액의 IgM, IgG와 이식 장기의 IgM, IgG 침착 정도 변화)

  • Lee, Doo-Yun;Paik, Hyo-Chae;Jeon, Se-Eun;Kim, Eun-Young;Nam, Jin-Young;Hong, Soon-Won;Hwang, Jung-Joo;Wada, Hiromi;Bando, Toru
    • Journal of Chest Surgery
    • /
    • v.40 no.7 s.276
    • /
    • pp.467-472
    • /
    • 2007
  • Background: Lung transplantation is the definitive therapy for end stage lung disorders. The success of allogenic lung transplantation has led to an increasing shortage of donor lungs from humans, including cadavers, and attention has now turned to transplantation of lungs from other species. However, there are many biological hurdles when using organs from other species because of hyperacute rejection after discordant xenotransplantation. Material and Method: Pigs (n=6, weighing $20{\sim}30kg$ each) for the donors and mongrel dogs (n=6, weighing $20{\sim}28kg$ each) for the recipients were used in this experiment. The left kidney of a pig was perfused to a mongrel dog for 30 minutes through the femoral artery and vein of the dog, and the right kidney was perfused for 30 minutes sequentially. Then, both lungs of the pig were perfused to the dog through the pulmonary artery and left atrium with using the same time intervals. The levels of IgM and IgG were measured from the blood and specimens of the kidney and lung. Result: The average levels of serum IgM gradually decreased after the perfusion, but the average levels of serum IgG did not charge from before to after perfusion. The immunohistochemical findings revealed decreased deposition of IgG and IgM after the perfusion. Conclusion: We conclude that the levels of the serum natural antibodies would be decreased with pre-transplantation xenograft perfusion in the recipient and the occurrence rate of hyperacute rejection after transplantation would be decreased.