• 제목/요약/키워드: Power supply noise

검색결과 483건 처리시간 0.029초

2.5V, 2.4GHz CMOS 저잡음 증폭기의 설계 (Design of a 2.5V 2.4GHz Single-Ended CMOS Low Noise Amplifier)

  • 황영식;장대석;정웅
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
    • /
    • pp.191-194
    • /
    • 2000
  • A 2.4 GHz single ended two stage low noise amplifier(LNA) is designed for Bluetooth application. The circuit was implemented in a standard digital 0.25 $\mu\textrm{m}$ CMOS process with one poly and five metal layers. At 2.4 GHz, the LNA dissipates 34.5 mW from a 2.5V power supply voltage and provides 24.6 dB power gain, 2.85 dB minimum noise figure, -66.3 dB reverse isolation, and an output 1-dB compression level of 8.5 dBm.

  • PDF

무선 근거리 통신망용 저잡음 증폭기의 설계 (Design of a Low Noise Amplifier for Wireless LAN)

  • 류지열;노석호;박세현
    • 한국정보통신학회논문지
    • /
    • 제8권6호
    • /
    • pp.1158-1165
    • /
    • 2004
  • 본 논문에서는 802.11a 무선 근거리 통신망 (wireless LAN)에서 사용 가능한 5.25㎓ SiGe 저잡음 증폭기(LNA)를 제안한다. 본 저잡음 증폭기는 2단 구조로 1V의 공급전압에서 동작하며, 0.18$\mu\textrm{m}$ SiGe 공정으로 제작되었다. 이 저잡음 증폭기의 경우 5.25㎓의 동작주파수에서 17㏈의 전압이득, 2.7㏈의 잡음지수, -l5㏈의 반사계수, -5㏈md의 IIP3 및 -14㏈m의 1㏈ compression point와 같은 우수한 동작특성을 보였으며, 바이어스 회로에서 소모되는 0,5㎽를 포함하여 전체회로에서 소모되는 총 전력은 7㎽이다.

Design of DC-DC Boost Converter with RF Noise Immunity for OLED Displays

  • Kim, Tae-Un;Kim, Hak-Yun;Baek, Donkyu;Choi, Ho-Yong
    • Journal of Semiconductor Engineering
    • /
    • 제3권1호
    • /
    • pp.154-160
    • /
    • 2022
  • In this paper, we design a DC-DC boost converter with RF noise immunity to supply a stable positive output voltage for OLED displays. For RF noise immunity, an input voltage variation reduction circuit (IVVRC) is adopted to ensure display quality by reducing the undershoot and overshoot of output voltage. The boost converter for a positive voltage Vpos operates in the SPWM-PWM dual mode and has a dead-time controller using a dead-time detector, resulting in increased power efficiency. A chip was fabricated using a 0.18 um BCDMOS process. Measurement results show that power efficiency is 30% ~ 76% for load current range from 1 mA to 100 mA. The boost converter with the IVVRC has an overshoot of 6 mV and undershoot of 4 mV compared to a boost converter without that circuit with 18 mV and 20 mV, respectively.

Bluetooth용 CMOS Fractional-N 주파수 합성기의 설계 (Design of CMOS Fractional-N Frequency Synthesizer for Bluetooth system)

  • 이상진;이주상;유상대
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
    • /
    • pp.890-893
    • /
    • 2003
  • In this paper, we have designed the fractional-N frequency synthesizer for bluetooth system using 0.35-um CMOS technology and 3.3-V single power supply. The designed synthesizer consist of phase-frequency detector (PFD), charge pump, loop filter, voltage controlled oscillator (VCO), frequency divider, and sigma-delta modulator. A dead zone free PFD is used and a modified charge pump having active cascode transistors is used. A Multi-modulus prescaler having CML D flip-flop is used and VCO having a tuning range from 746 MHz to 2.632 GHz at 3.3 V power supply is used. Total power dissipation is 32 mW and phase noise is -118 dBc/Hz at 1 MHz offset.

  • PDF

광대역 LC 대역 통과 필터를 부하로 가지는 0.18-μm CMOS 저전력/광대역 저잡음 증폭기 설계 (A 0.18-μm CMOS Low-Power and Wideband LNA Using LC BPF Loads)

  • 신상운;서영호;김창완
    • 한국전자파학회논문지
    • /
    • 제22권1호
    • /
    • pp.76-80
    • /
    • 2011
  • 본 논문에서는 3~5 GHz의 동작 주파수를 가지는 0.18-${\mu}m$ CMOS 저전력/광대역 저잡음 증폭기 구조를 제안한다. 제안하는 광대역 저잡음 증폭기는 광대역 입력 정합, 발룬 기능, 그리고 우수한 노이즈 특성을 얻기 위해 노이즈 제거 회로 구조를 채택하였다. 특히, 2차 LC-대역 통과 필터를 증폭기의 부하로 구현함으로써 기존에 발표된 문헌들보다 최소 전력을 소모하면서 높은 전력 이득과 낮은 잡음 지수를 얻을 수 있었다. 본 논문에서 제안하는 저잡음 증폭기는 1.8 V 공급 전압으로부터 단지 3.94 mA의 전류를 소모하며, 모의 실험 결과, 3~5 GHz UWB 대역에서 전력 이득은 최소 +17 dB 이상, 잡음 지수는 최대 +4 dB 이하, 그리고 입력 IP3는 -15.5 dBm을 가진다.

근거리 도서간 통합전력공급에 유효한 해저케이블 포설 방안 결정 알고리즘 (Algorithm Deciding Offshore Cable Layout Valid for Integrated Power Supply Between Adjacent Islands)

  • 김미영;노대석;문국현;서인용
    • 한국산학기술학회논문지
    • /
    • 제19권2호
    • /
    • pp.28-36
    • /
    • 2018
  • 자가발전 도서는 내연발전 혹은 PV 발전을 이용하여 전력을 공급하고 있는데, 해양환경에 의한 문제점(경년열화, 염해), 환경오염(매연, 소음, 분진) 및 발전비용(설치비, 유지관리비) 상승 등 전력공급 효율성에 대한 문제점이 대두되고 있다. 한전에서 전력공급을 담당하고 있는 65개 자가발전 도서지역의 2016년 원가회수율은 27%에 불과하며 원가의 73%에 달하는 결손액이 발생되고 있다. 이들 도서지역에서 발생한 결손액의 현황을 보면, 발전분야에서 발생하는 비용은 전체의 91% 정도를 차지하고 있고 운영비용인 변동비(연료비)와 고정비(지급수수료, 수선유지비, 기타비용) 중에서 고정비가 차지하는 비율은 60% 정도이다. 즉, 도서지역 발전효율을 향상시키고 운영체계를 효율화시키는 최적 전력공급방안을 마련하여 운영 결손액을 줄일 필요가 있다. 그러므로 거리상 가까운 여러 개의 도서 발전설비를 한 곳으로 통합하고, 인근 도서지역 간 전력공급에 해저케이블을 이용하면 연료 수송 및 설비 유지관리의 간결화를 도모할 수 있다. 따라서, 본 논문에서는 통합운영 경제성 평가를 통하여, 내연발전 및 PV 발전으로 운영되고 있는 근거리 도서간 통합운영에 유효한 해저케이블 포설 방안(1회선, 2회선, 1회선 루프)을 결정하는 알고리즘을 제시한다. 또한, 제안한 알고리즘을 바탕으로 자가발전도서의 독립운전방식과 비교 분석한 결과, 근거리이며 내연발전으로 운영되나 최대부하가 작은 2개 혹은 3개 도서에 있어서 도서간 통합운영이 경제적인 전력공급방안임을 확인하였다.

Design of a 1~10 GHz High Gain Current Reused Low Noise Amplifier in 0.18 ㎛ CMOS Technology

  • Seong, Nack-Gyun;Jang, Yo-Han;Choi, Jae-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권1호
    • /
    • pp.27-33
    • /
    • 2011
  • In this paper, we propose a high gain, current reused ultra wideband (UWB) low noise amplifier (LNA) that uses TSMC 0.18 ${\mu}m$ CMOS technology. To satisfy the wide input matching and high voltage gain requirements with low power consumption, a resistive current reused technique is utilized in the first stage. A ${\pi}$-type LC network is adopted in the second stage to achieve sufficient gain over the entire frequency band. The proposed UWB LNA has a voltage gain of 12.9~18.1 dB and a noise figure (NF) of 4.05~6.21 dB over the frequency band of interest (1~10 GHz). The total power consumption of the proposed UWB LNA is 10.1 mW from a 1.4 V supply voltage, and the chip area is $0.95{\times}0.9$ mm.

A Differential Voltage-controlled Oscillator as a Single-balanced Mixer

  • Oh, Nam-Jin
    • International journal of advanced smart convergence
    • /
    • 제10권1호
    • /
    • pp.12-23
    • /
    • 2021
  • This paper proposes a low power radio frequency receiver front-end where, in a single stage, single-balanced mixer and voltage-controlled oscillator are stacked on top of low noise amplifier and re-use the dc current to reduce the power consumption. In the proposed topology, the voltage-controlled oscillator itself plays the dual role of oscillator and mixer by exploiting a series inductor-capacitor network. Using a 65 nm complementary metal oxide semiconductor technology, the proposed radio frequency front-end is designed and simulated. Oscillating at around 2.4 GHz frequency band, the voltage-controlled oscillator of the proposed radio frequency front-end achieves the phase noise of -72 dBc/Hz, -93 dBc/Hz, and -113 dBc/Hz at 10KHz, 100KHz, and 1 MHz offset frequency, respectively. The simulated voltage conversion gain is about 25 dB. The double-side band noise figure is -14.2 dB, -8.8 dB, and -7.3 dB at 100 KHz, 1 MHz and 10 MHz offset. The radio frequency front-end consumes only 96 ㎼ dc power from a 1-V supply.

전원노이즈 억제용 차폐절연변압기의 설계 및 주파수특성 해석 (Design and Frequency Characteristic Analysis of Shielded Isolation Transformer for the Power Line Noise Reduction)

  • 이재복;허창수;이태호
    • 한국자기학회지
    • /
    • 제9권1호
    • /
    • pp.55-63
    • /
    • 1999
  • AC 전원선로에서 발생하는 수 kHz에서 수십 MHz에 이르는 광대역의 주파수특성을 가진 전원노이즈는 전기, 전자, 통신장비의 정상적인 동작에 많은 장해요소가 되고 있으며 이들 전도성 노이즈를 억제하기 위한 기기로 기존에는 써어지 억제기와 필터가 적용되어 왔다. 그러나, 이러한 기존의 노이즈 대책기기는 전력 공급선과 노이즈 피해회로 상호간의 전기적인 절연 분리가 원천적으로 불가능하므로 전도성 노이즈 중에서 가장 큰 피해를 끼치는 공통모드 노이즈 억제성능이 지극히 제한적이다. 따라서 본 논문에서는 전원회로의 공통모드 및 정상모드 노이즈 억제에 사용 가능한 차폐절연변압기에 대한 모의 등가회로를 제안하였으며, 계산과 실험을 통해 그 성능을 비교 해석함으로써 모의 해석의 유효성을 입증하였다. 또한 차폐절연변압기의 설계 방법을 제시하였으며, 제작된 3kVA급 시작품과 비 차폐된 절연변압기의 노이즈 성능을 비교함으로써 전도성 노이즈 억제성능의 우수성을 검증하였다.

  • PDF

디지털 보청기를 위한 저전력, 저잡음 전치증폭기 설계 (Desgin of Low-power, Low-noise Preamplifier for Digital Hearing-Aids)

  • 임새민;박상규
    • 전자공학회논문지
    • /
    • 제49권12호
    • /
    • pp.219-225
    • /
    • 2012
  • 디지털 보청기용 저전력, 저잡음 전치증폭기를 설계하였다. 본 전치증폭기는 일렛트렛 마이크로부터 싱글엔드 형태로 입력 받은 신호를 증폭한 후, 차동신호의 형태로 ADC에 전달한다. 또, 3.6, 7.2, 14.4, 28.8의 가변이득을 가지며 100Hz~10kHz의 주파수 대역에서 동작한다. 설계된 증폭기는 130nm CMOS 공정으로 제작되었으며, 1.2V 전원을 사용하여 측정한 결과 85dB의 SNR, 0.05%의 고조파 왜곡 및 $200{\mu}W$의 파워소모를 얻었다.